A modified method of characteristics incorporating streamline diffusion

A hybrid finite-element method, combining ideas from a modified method of characteristics and the streamline diffusion method, delivers accurate solutions to the advection–diffusion equation. An error analysis for the case of tensorial diffusion shows that the lowest-order version of the scheme, which allows one to use a symmetric linear solvers at each time step, possesses first-order accuracy in time and space. Numerical experiments demonstrate the scheme's ability to model advection-dominated transport of solute plumes without distorting sharp fronts. © 1995 John Wiley & Sons, Inc.     

Peritectic phase growth in directionally solidified Cu-70% Sn alloy

The growth mechanism of the peritectic η phase involving the peritectic reaction and peritectic transformation in Cu-70%Sn alloy was investigated under directional solidification. The results show that a major growth mechanism in thickening of the peritectic η-layer is not the peritectic reaction but the peritectic transformation. The transformation temperature and isothermal time play crucial roles in determining the volume fraction and the thickness of the peritectic η phase. With the increase of the temperature and isothermal time, the volume fraction of the peritectic η phase increases. The regressed data show that the relationship between the thickness of η phase (Δx) and the transformation temperature (T) meets the following equation In Δx=6.5−1673 1 / T. Additionally, there exists a relationship between the thickness of the η phase (Δx) and the isothermal time (t) at the 9 mm solidification distance below the peritectic reaction interface, Δx=0.72t ^1/2, which is consistent with the theoretical model. Supported by the National Science Foundation of China (Grant No. 50395102)     

线性电压扫描下1VIIS器件瞬态的简单模型

本文用准平衡模型分析讨论了线性电压扫描下MIS器件的I/V瞬态.文中除了给出一般的处理方法以外，还给出了几种不同电压扫描率下I/Y特性的计算结果，并与已往的模型作了比较.     

Results of the maximum genus of graphs

In this paper,we provide a new class of up-embeddable graphs,and obtain a tight lower bound on the maximum genus of a class of 2-connected pseudographs of diameter 2 and of a class of diameter 4 multi-graphs.This extends a result of Skoviera.     

牛顿第二定律实验中的误差分析

本文是通过对加速度的实验值和理论值进行比较和分析，给出误差的合理范围。     

Temperature‐modulated differential scanning calorimetry studies on the origin of double melting peaks in isothermally melt‐crystallized poly(L‐lactic acid)

In this work, the melting behaviors of nonisothermally and isothermally melt‐crystallized poly(L ‐lactic acid) (PLLA) from the melt were investigated with differential scanning calorimetry (DSC) and temperature‐modulated differential scanning calorimetry (TMDSC). The isothermal melt crystallizations of PLLA at a temperature in the range of 100–110 °C for 120 min or at 110 °C for a time in the range of 10–180 min appeared to exhibit double melting peaks in the DSC heating curves of 10 °C/min. TMDSC analysis revealed that the melting–recrystallization mechanism dominated the formation of the double melting peaks in PLLA samples following melt crystallizations at 110 °C for a shorter time (≤30 min) or at a lower temperature (100, 103, or 105 °C) for 120 min, whereas the double lamellar thickness model dominated the formation of the double melting peaks in those PLLA samples crystallized at a higher temperature (108 or 110 °C) for 120 min or at 110 °C for a longer time (≥45 min). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 466–474, 2007     

A new generalized algebra method and its application in the (2 + 1) dimensional Boiti–Leon–Pempinelli equation

In the present paper, some types of general solutions of a first-order nonlinear ordinary differential equation with six degree are given and a new generalized algebra method is presented to find more exact solutions of nonlinear differential equations. As an application of the method and the solutions of this equation, we choose the (2 + 1) dimensional Boiti Leon Pempinelli equation to illustrate the validity and advantages of the method. As a consequence, more new types and general solutions are found which include rational solutions and irrational solutions and so on. The new method can also be applied to other nonlinear differential equations in mathematical physics.     

Below-band-gap waveguiding behaviors of a weakly index-guided GaAs/AlGaAs quantum well laser

We report the reduced waveguiding efficiency for the signals around 1560 nm as the injection current of an GaAs/AlGaAs multiple quantum well laser diode (lasing wavelength at 840 nm) with a ridge-loading waveguide configuration increased. This reduction trend stopped when the injection current reached the threshold condition of the laser diode. The decreased waveguide transmission and the more expanded mode profile indicated the variation of the effective refractive index gradient in the lateral dimension with injection current. This variation was due to the refractive index decrease with increasing carrier density even below band gap. A slab waveguide model was used to simulate the lateral mode profile variation with injection current. The refractive index differences between the guiding layer and claddings in the slab waveguide model provided estimates of refractive index contrasts of the laser diode at a concerned wavelength under various injection conditions.     

Solid codes and the uniform density of fd-domains

By means of further investigation of solid codes,the problem“Is every fd-domain uni- formly dense”proposed by Yuqi Guo,C.M.Reis and G.Thierrin in 1988 is solved in this paper.     

用光栅衍射法测试液体表面张力

利用π型直线状振源，在待测液面产生正弦形表面驻波，将其作为一种理想的反射式光栅，通过对激光束的衍射，形成线阵衍射光斑．借助LCCD等硬件测试系统及相应的数据采集与处理系统，实时准确地测量液体表面张力。