微波消解-ICP-MS测定动物血清和组织器官中的微量银元素

银的应用在当代生物医学领域得到极大地推广,其生物安全性也受到密切关注,明确银离子在生物体内分布以及其安全阈值显得格外重要。因此,需要一种高灵敏度的分析方法来确定医学生物样品中银的含量。电感耦合等离子体质谱(ICP-MS)法对于金属离子检测具有很高的灵敏度,非常适用于医学生物样品中所含痕量银元素的检测,但具体方法的开发,包括样品前处理和检测过程,尚处于起步阶段。本研究建立了一套简便易行的微波消解处理机体血清和组织器官样品,通过ICP-MS法测定样品内微量银元素的检测方法。血清和肌肉、骨髓、骨骼组织,以及心脏、肝脏、脾脏、肾脏器官样品经5 mL硝酸-2 mL过氧化氢体系微波消解。消解程序采用2 000 W功率3步式温度梯度,样品最终消解完全,获得的数据重复性好,且耗费时间短,为大批量样品处理节省了时间。消解溶液经稀释定容,在优化仪器工作参数后,用ICP-MS对溶液中的107Ag进行测定,以钇(Y)为内标元素补偿基体效应和准确度漂移。测定结果显示,107Ag元素检出限为0.98 μg·kg-1,标准曲线相关系数为0.999 9,回收率为98%～107%,相对标准偏差(RSD)为2.0%～4.3%。用该法测定了动物血清和组织器官中的银元素含量,发现机体摄入银离子后,主要蓄积在肝脏。检测结果表明ICP-MS方法可以准确地测定机体的微量银元素,所建立的方法适用性强,可满足不同类型医学生物样品中微量银元素的测定,操作简便快捷,结果准确且灵敏度高,尤其适合于大批量生物样品的检测,为其他生物样品微量元素的检测提供了指导。     

高能激光能量计溯源问题研究

由于高能激光能量计标定过程中没有标准的能量测量装置和标准的激光源,无法采用常规方法对其进行标校。提出了一种利用现有小能量计从低到高逐级多次传递不确定度的方法,以及一种利用能量等效原理对激光能量计进行标校的方法。不确定度传递法方法简单,但环节较多导致不确定度较大。等效标定法包括电标法和光标法,电标法对设计要求较高,但求解过程相对简单。光标法工程实现难度要低得多,但必须事先对灯组余热及热损失进行测算。等效法的三个条件与误差大小关系紧密,在结构设计中必须严格考虑,它是提高测量准确性的根本,其次要尽量减少不确定度传递的中间环节,最后需要对误差项进行科学分析和测定,在此基础上对这些项进行相应的修正和补偿。     

Preparation and Characterization of Isotactic Polypropylene Reinforced with Hydroxyapatite Nanorods

Isotactic polypropylene (PP) composites filled with hydroxyapatite nanorods (nHAs) were fabricated using a melt compounding process. The effects of nHA additions on the structure, thermal, and mechanical properties as well as bioactivity of PP were investigated. Wide-angle X-ray diffraction and differential scanning calorimetry results showed that PP crystallized exclusively in the α-form when adding nHAs. Dynamic mechanical analysis showed that nHAs enhanced the storage modulus of PP. Mechanical measurements showed that nHAs stiffened and reinforced PP but reduced its tensile ductility and impact strength considerably. Furthermore, the PP/nHA nanocomposites were found to exhibit excellent bioactivity upon immersion in a simulated body fluid solution. This was attributed to the formation of apatite mineral crystals on the nanocomposite surfaces as revealed by scanning electron microscopy and energy dispersive X-ray analysis.     

The characteristics analysis of a new-style four-mirror axisymmetric-fold-combination cavity adapting to cylindrical discharge region

An axisymmetric-fold-combination (ASFC) cavity composed of two planar mirrors and spherical mirrors was designed. It is a stable-unstable resonator cavity. The light field of radial direction is Gaussian distribution. And in angular orientation, the distribution keeps invariant. It could generate annular CO₂ laser beam with excellent spatial coherence. And the spatial coherence is commendably realized with its stable-unstable cavity structure. The output light intensity distribution of this special model was discussed and simulated. With exterior lenses group, the output beams can be adjusted and controlled better to meet the manufactural requirements. Some references were provided for further research of the cavity with cylindrical discharge region.     

应用近红外光谱和多算法融合方法分析烤烟的香型风格特征

以全国17个主要烤烟产地省份中收集的3 914个烟叶样品的近红外光谱为实验对象,其中浓香型、中间香型、清香型烟叶光谱分别865条、1 403条、1 646条,应用近红外光谱和多算法融合方法分析其香型风格特征。在以产地进行初步划分烟叶香型以及认可过渡型和非典型香型类型的基础上,选取基于主成分及Fisher准则的投影法(PPF)、偏最小二乘判别(DPLS)、支持向量机(SVM)作为单分类器,得到各个算法第1和2判别分析结果;应用PPF-DPLS-SVM融合和各算法第1和2判别分析结果,将预测验证样品的分析结果详细划分为典型、过渡型、非典型香型样品(分别为493,392,115个);其中典型香型烟叶样品的判别准确率达到92.7%,较未进行典型样品划分时PPF,DPLS,SVM单算法的识别准确率分别提高了30.2%,15.4%,16.6%。样品数据来源于全国主要烤烟产地,数据量大,代表性较好,分析结果具有一定普遍性;提出的多算法融合分析方法大幅度提高了通过客观数据判别烤烟香型的准确率;同时,将烤烟香型细划分为典型、过渡型和非典型香型的方式,对烤烟烟叶原料的科学合理利用以及烟叶原料的模块化工业加工等有指导作用。     

Quantum Key Distribution Network Based on Differential Phase Shift

Using a series of quantum correlated photon pairs, we propose a theoretical scheme for any-to-any multi-user quantum key distribution network based on differential phase shift. The differential phase shift and the different detection time slots ensure the security of our scheme against eavesdropping. We discuss the security under the intercept-resend attack and the source replacement attack.     

大口径KDP晶体角度相位匹配离线测量精度研究

为满足惯性约束聚变(ICF)实验对激光驱动器高效三倍频能力的要求, 对离线测量晶体角度相位匹配方案进行了优化。采取的主要优化措施是：提高晶体准直技术能力;降低模拟小口径激光输出变化对测量不稳定性的影响。通过理论分析和对实际测量结果的系统分析,得到了晶体离线测量的不确定度：其中二倍频相位匹配角测量扩展不确定度为15.94 rad,三倍频相位匹配角测量扩展不确定度为27.8 rad,达到了较高的晶体离线测量精度要求。     

光学复用大视场成像研究

为了简化光学复用成像系统复杂度和降低对编码方式的要求,基于反射镜旋转完成通道编码,构建了结合分束镜和光学成像系统实现双通道混叠成像的实验装置.为实现混叠图像的有效解混叠,提出了利用特征点检测与匹配方法实现多幅混叠图像之间平移量的自动识别,进而构建出具有亚像素精度的双通道光学复用成像系统的系统复用矩阵,并采用梯度投影稀疏重建算法完成基于多幅图像的双通道图像重建,最终实验实现了光学成像系统视场角的2倍放大.此外,对所提方法在其他场景的适应性也进行了实验验证,表明了其可在不改变焦平面探测器的情况下实现光学成像系统视场角的有效放大,大大节约了大视场光学成像系统的研制成本.     

Aeroacoustic Simulations Using Compressible Lattice Boltzmann Method

This paper presents a lattice Boltzmann (LB) method based study aimed at numerical simulation of aeroacoustic phenomenon in flows around a symmetric obstacle. To simulate the compressible flow accurately, a potential energy double-distribution-function (DDF) lattice Boltzmann method is used over the entire computational domain from the near to far fields. The buffer zone and absorbing boundary condition is employed to eliminate the non-physical reflecting. Through the direct numerical simulation, the flow around a circular cylinder at $Re$=150, $M$=0.2 and the flow around a NACA0012 airfoil at $Re$=10000, $M$=0.8, $α$=$0^◦$ are investigated. The generation and propagation of the sound produced by the vortex shedding are reappeared clearly. The obtained results increase our understanding of the characteristic features of the aeroacoustic sound.     

Tail wavelets in merger of binary compact objects

We present a model for tail wavelets, a phenomenon known as "echo" in the literature. The tail wavelet may appear in signal reconnaissances in the merger of binary compact objects, including black holes and neutron stars. We show that the dark matter surrounding the compact objects lead to a speculated tail wavelet following the main gravitational wave(GW). We demonstrate that the radiation pressure of the main wave is fully capable of pushing away the surrounding matter to some altitude, and splashing down of the matter excites the tail wavelet after ringing down of the main wave. We illustrate this concept in a simplified model, where numerical estimations are conducted on the specific distribution of dark matter outside the black hole horizon and the threshold values in accordance with observations. We study the full back reaction of the surrounding dark matter to the metric and find that the effect on to the tail wavelets is insignificant. We reveal the fine difference between the tail wavelets of a dressed and a bare black hole. We demonstrate that the tail wavelet can appear as a natural phenomenon in the frame of general relativity, without invoking modified gravities or quantum effects.