Carbon Nanotubes Grown on Sepiolite as Catalyst Carrier

Multi-walled carbon nanotubes were synthesized by the catalytic decomposition of acetylene at 750℃ over sepiolite powder,which was treated with aqueous cobalt nitrate. It is expected that the composite with high specific area will have high capacity of hydrogen storage.     

Reactions of Laser Ablation-magnesium Plasma with Methanol Clusters

IntroductionReactions of metal ions with neutral molecules orclusters produce a variety of metal complex ions andother new series of cluster ions including cations andanions.The laser ablation-molecular beam(LA-MB)method has marked its relevance in the st…     

介体型乳酸脱氢酶生物传感器的研制及应用

本报道了能对丙酮酸产生良好响应的电流型乳酸脱氢酶生物传感器。该传感器以耐尔兰Ａ修饰浸石墨电极为基体电极，将酶直接固化在蚕丝蛋白膜上。在ＰＨ７．４的ＮａＨ２ＰＯ４－ＮａＯＨ介质中，当２．４×１０＾－４ｍｏｌ／Ｌ的辅酶Ｉ（ＮＡＤＨ）存在下，该传感器的响应电流与丙酮酸浓度在３．２×１０＾－５ｍｏｌ／Ｌ范围内有良好的线性关系。响应时间为６０ｓ．本讨论了影响传感器响应的各种因素，用此传感器测定了人血清中     

茄黄斑螟性信息素化学的结构签定(英文)

本文采用TLC、GC、微量臭氧化和GC-MS等分析方法,从茄黄斑螟雌蛾性腺体提取物中,分离和鉴定出性信息素反-11-十六碳烯醇乙酸酯(1a)。触角电位和田间试验证明,天然提取物和合成样品均有强烈的生物活性。     

Liquid-liquid Extraction System Based on Non-ionic Surfactant-salt-H_2O and Mechanism of Drug Extraction

The utilization of solid-liquid extraction system based on polymer-(NH4)2SO4 -H2O on separation of metal ions and bio-active substances has been summarized1. Cloud point extraction (CPE) benefits the environment and has been used in separation of metal chelates, biomacromolecules and in pretreatment of environmental samples2-4. In a 10 mL color comparison tube 20% PEG-1000 and 2.5 g (NH4)2SO4 were chosen as phase separation condition at pH 5.5. The average extraction efficiencies we…     

Studies on the refolding of the reduced-denatured insulin with size exclusion chromatography

The refolding of the reduced-denatured insulin from bovine pancreas was investigated with the size exclusion chromatography (SEC). It was shown that the reduced-denatured insulin originally denatured with 7.0 mol·L-1 guanidine hydrochloride (GuHCI) or 8.0 mol·L-1 urea could not be refolded with a non-oxidized mobile phase. Although the oxidized and reduced glutathione (GSSG and GSH) were employed in the oxidized mobile phase, the reduced-denatured insulin still could not be renatured. However, in the presence of 2.0 mol·L-1 urea in the oxidized mobile phase employed, the reduced-denatured insulin can be refolded with SEC, and the aggregation of denatured insulin can be diminished by urea. In addition, the disul-fide exchange of reduced-denatured insulin also can be accelerated with GSSG/GSH in the oxidized mobile phase. The three disulfide bridges of insulin were formed correctly and the reduced-unfolded insulin can be renatured completely. The results were further tested with re-versed-phase liquid chromatography (RPLC) and hydrophobic interaction chromatography (HIC).     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

Cu-Ce/γ-Al2O3对硬脂酸催化水热脱氧产生烷烃的效果

利用等体积浸渍法制备Cu-Ce/γ-Al₂O₃催化剂，并在无H₂存在的条件下对硬脂酸进行催化水热液化。对催化剂进行BET比表面积分析和X射线衍射（XRD）分析可知，Cu-Ce/γ-Al₂O₃催化剂中存在CuO和CeO₂两种晶型，在300℃条件下水热反应12 h后具有更好的热稳定性。通过对硬脂酸进行水热液化实验和对生物油进行气相色谱-质谱（GC-MS）分析发现，加入Cu-Ce/γ-Al₂O₃催化剂能够获得最高的硬脂酸转化率（94.71%）和总烃产率（81.41%），水热液化脱氧效果最好。分析正烷烃的产率，结果发现硬脂酸在高温水热条件下主要发生脱羧反应。Cu-Ce/γ-Al₂O₃催化剂的加入能够同时促进反应过程中脱羧反应、加氢脱氧反应和裂化反应。此外，Cu-Ce/γ-Al₂O₃还能够促进羰基基团的脱除，有效减少产物中的醛和酮类物质。