Cu/Ni助催化剂对TiO2光催化制取苯酚性能的影响

以TiO₂纳米粒子为主催化剂, 采用“浸渍-还原法”构筑了铜、镍共负载的二氧化钛基光催化系统。以苯为起始原料, H₂O₂为氧化剂, 研究了Cu/Ni助催化剂对TiO₂可见光催化制取苯酚性能的影响并对Cu/Ni助催化剂的作用机制进行了探讨。结果表明, 在可见光照射下, 纯TiO₂纳米粒子对苯氧化制取苯酚反应没有催化活性。铜、镍的引入可以明显地增强TiO₂可见光催化制取苯酚的活性。当使用负载有铜、镍的TiO₂作为催化剂时, 苯酚的产率可达到18%。结果还表明Cu、Ni之间存在着很强的协同作用。在该协同作用下, Cu、Ni共负载的TiO₂纳米粒子表现出了较单一金属负载的TiO₂纳米粒子高得多的光催化活性。     

铁酸镍用于热化学循环反应CO2分解制CO的研究

采用共沉淀法制备了NiFe₂O₄和NiFe₂O₄/ZrO₂催化剂,用TGA考察了其热化学法,CO₂高温分解反应性能。通过对反应前后催化剂的表征发现,反应高温使两种催化剂都发生了明显的烧结,导致在热还原反应中形成的还原态氧化物不能完全被CO₂氧化从而降低了催化剂的反应性能;ZrO₂的加入对于提高催化剂的热稳定性以及循环反应稳定性具有重要的作用。在高温反应炉中考察了NiFe₂O₄/ZrO₂的CO₂分解实验,结果表明,提高热还原温度可以提高CO产量,然而,随着循环次数的增加CO的产量降低得更明显。     

由不同镍盐前体制备高分散Ni/SBA-15催化剂：活化氛围的影响

以硝酸镍和乙酸镍为镍前体,用浸渍法分别在空气和氢气氛围活化制得系列Ni/SBA-15催化剂,通过XRD、H₂-TPD、N₂物理吸附和在线质谱等物理化学手段对催化剂进行了表征,并结合微型高压反应釜萘加氢反应,评价了催化剂的加氢性能。结果表明,氢气氛围活化对硝酸镍为镍前体所制Ni/SBA-15催化剂的镍分散度和活性有显著促进作用,而空气氛围活化对乙酸镍为镍前体所制催化剂有明显促进作用。根据催化剂前体在不同氛围活化时的热分解产物,提出了活化氛围对不同镍前体制得Ni/SBA-15催化剂所产生的作用机理。     

纳米Ag/TiO_(2)纳米管阵列基底构建及表面增强拉曼散射光谱检测与降解盐酸四环素北大核心CSCD

将阳极氧化与光还原法结合,在TiO_(2)纳米管阵列(TiO_(2)NTAs)表面修饰Ag纳米粒子,获得一种均匀有序、稳定性高且可循环的TiO_(2)NTAs/Ag活性基底。采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)、表面增强拉曼散射光谱(SERS)和扫描电子显微镜(SEM)等手段对TiO_(2)NTAs/Ag的组成和结构进行了表征。进一步研究了该TiO_(2)-NTAs/Ag阵列对盐酸四环素(TC-HCl)的SERS响应,结果表明,该复合基底对TC-HCl具有较高的检测灵敏度,在水中检测限可达1×10^(−14) mol/L,而TiO_(2)-NTAs与Ag之间的协同效应对其检测性能的提高起着关键作用。此外,TiO_(2)NTAs/Ag基底在光照下对TC-HCl展示了优异的降解活性,且至少可循环使用8次。表明该TiO_(2)NTAs/Ag基底在环境中有机污染物的SERS检测和降解领域具有潜在的应用前景。     

Thermal- and Light-driven Metathesis Reactions Between Different Diselenides

Thermal- and light-driven diselenide metathesis reactions with different types of diselenides are investigated systematically. Their exchange reaction rates and equilibrium conversions are compared in the aspects of the different diselenide structures, activation conditions and solvents. As a result, the metathesis reactions between diselenide small molecules are demonstrated with high dynamic and sensitive features, which can be broadly tuned by varying the electron affinity and aromaticity of the diselenide substituents and external conditions(e.g., solvent, stimulus mode). The current work thus will not only advance our understanding on diselenide metathesis chemistry, but also promote concrete and impactful studies in selenium-containing materials.     

Development of the Self-doping Porous Carbon and Its Application in Supercapacitor Electrode

The massive discharge of biomass wastes not only causes waste of resources, but also pollutes the environment. Therefore, converting biomass wastes into carbon materials is an effective way to solve the above problems. Here, using biomass waste pig nails as raw materials and K₂CO₃ as chemical activators, the N-doped porous carbon(KPNC) is prepared by direct pyrolysis. As an electrode for supercapacitors, the electrochemical tests of KPNCs showed that they exhibited good electrochemical performance and excellent cycling stability. When the current density is 0.2 A/g, the specific capacitance is up to 344.6 F/g. Moreover, it still maintains 97.6% initial capacitance retention after 2000 cycles at a high current density of 5 A/g. Above exceptional electrochemical performances may be ascribed to an appropriate porous structure(S_micro/S_total=80.31%, V_micro/V_total=76.19%), high nitrogen contents(4.44%, atomic fraction), oxygen contents(9.13%, atomic fraction) as well as small internal resistance. The above experimental results show that the conversion of pig nails to porous carbon can reduce the waste of resources and alleviate environmental pollution.     

Surface Functionalization of PEO Nanofibers Using a TiO2 Suspension as Sheath Fluid in a Modified Coaxial Electrospinning Process

Convenient and integration fabrication process is a key issue for the application of functional nanofibers. A surface functionalization method was developed based on coaxial electrospinning to produce ultraviolet(UV) protection nanofibers. The titanium dioxide(TiO₂) nanoparticles suspension was delivered through the shell channel of the coaxial spinneret, by which the aggregation of TiO₂ nanoparticles was overcome and the distribution uniformity on the surface of polyethylene oxide(PEO) nanofiber was obtained. With the content of TiO₂ increasing from 0 to 3%(mass fraction), the average diameter of nanofibers increased from (380±30) nm to (480±100) nm. The surface functionalization can be realized during the electrospinning process to gain PEO/TiO₂ composite nanofibers directly. The uniform distribution of TiO₂ nanoparticles on the surface of nanofibers enhanced the UV absorption and resistance performance. The maximum UV protection factor(UPF) value of composite nanofibers reaches 2751. This work presented a novel surface-functionalized way for the preparation of composite nanofiber, which has great application potential in the field of micro/nano system integration fabrication.     

固相萃取/超高效液相色谱－串联质谱法测定香辛调料中的曲托喹酚

采用MCX固相萃取柱净化,以超高效液相色谱－串联质谱（UPLC－MS/MS）法建立了香辛调料中曲托喹酚的测定方法。样品采用0.2%酸性乙醇提取,经MCX柱净化浓缩后,在ACQUITY BEH C18色谱柱上以乙腈和0.1%甲酸水溶液为流动相梯度洗脱,UPLC－MS/MS以MRM方式进行定量分析。结果表明,曲托喹酚在0.1～50 ng/mL范围内线性关系良好,相关系数（r）大于0.998,方法的检出限（LOD）为0.2 μg/kg,定量下限（LOQ）为0.5 μg/kg。化合物在不同基质的4个加标水平（0.5、2、10、100 μg/kg）下的回收率为74.5%～98.8%,相对标准偏差（RSD）为3.1%～9.1%。该方法灵敏、准确、可靠,可用于香辛调料中曲托喹酚的测定。     

无溶剂高度分散Ni/MCM-41催化剂的制备及其萘加氢性能

分别用机械研磨无溶剂法、添加柠檬酸无溶剂法制备了Ni/MCM-41催化剂,对所制催化剂进行了分析表征,探究其萘加氢反应性能并与常规浸渍法进行了对比。与常规浸渍法相比,机械研磨无溶剂法所制催化剂的物理性质相近,金属镍分散度和萘加氢性能略有提高;添加柠檬酸无溶剂法则显著提升了催化剂的分散度和萘加氢性能,金属镍分散度由6.9%大幅提高至67.9%,萘加氢性能提高了近1倍。通过红外光谱、紫外光谱和热重分析,提出了添加柠檬酸对无溶剂法制备催化剂性能的促进作用机制。     

整体柱在线净化-液相色谱-高分辨质谱法快速测定牛奶中15种糖皮质激素

将自制的在线固相萃取柱与液相色谱串联四极杆静电轨道离子阱质谱技术相结合,建立了快速测定牛奶中15种糖皮质激素类药物的新方法.样品采用乙腈均质提取2 min,经自制在线固相萃取小柱富集净化,在Waters CORTECS T3(150 mm ×2.1 mm,5μm)分析柱上实现良好分离,外标法定量.15种目标物质量浓度在0.10～100 ng/mL范围内线性关系良好,相关系数均大于0.99;在0.20,0.40,2.0μg/kg3个添加水平下,15种糖皮质激素的回收率在87.1％ ～ 116.0％之间,相对标准偏差(RSD)在3.2％～8.7％(n=6)之间;方法的检出限(LOD,S/N≥3)和定量限(LOQ,S/N≥1O)分别为0.10和0.20μg/kg.该法适用于大批量牛奶中糖皮质激素类药物的快速定性筛查和定量分析.