Determination of Ascorbic Acid by Electrocatalytic Response of an Electrode Coated with Polyvinylpyridine Film and Palladium-Plated

A procedure was developed for analysis of ascorbic acid with a carbon glass electrode coated with a palladium-modified poly(2-vinylpyridine) film.     

Spectroscopic studies of biologically active organotin(IV) derivatives of 2-[N-(2,4,6-tribromophenylamido]propanoic acid

Herein we describe the synthesis and characterization of compounds having the formulae R₂SnL₂ and R₃SnL, where R = Me, n-Bu, Ph and n-Oct and L = 2-[N-(2,4,6-tribromophenylamido]propanoic acid. All the complexes have been characterized by various spectroscopic methods (IR and ¹H, ¹³C, ¹¹⁹Sn NMR), elemental analysis, mass spectrometry and physical data. These compounds were also screened for their biological activity and found some encouraging results.     

Analysis of thermally induced multistable composites

This paper models the non-linear flexural response of laminates that have piecewise variation of lay-up in the planform, using finite element analysis. Attention is focused on the effects that thermal stresses have on the potential multiple shapes of a composite structure. Unsymmetric laminates may possess more than a single equilibrium configuration, and during the cool-down the solution thus bifurcates at a critical temperature. In static analyses, numerical solutions are often coaxed to converge into one or the other branch of the solution. A methodology to overcome this problem is presented. Such modelling is necessary to allow application of multistable composite within morphing aircraft structures as multistable composites could provide a viable solution for the realisation of shape-adaptable structures.     

Feedback stabilization of snap-through buckling in a preloaded two-bar linkage with hysteresis

We study a linearly damped preloaded two-bar linkage that exhibits hysteresis due to the presence of multiple attracting equilibria. The dynamics at the unstable equilibrium, through which a snap-through buckle occurs, are not linearizable due to a solution-dependent singularity. We stabilize the unstable equilibrium using two distinct non-linear controllers. The feedback-linearization controller requires knowledge of the linkage parameters, whereas the robust version of the intrinsic non-linear proportional-derivative controller requires only an upper bound on the stiffness.     

Validation of a thermal decomposition mechanism of formaldehyde by detection of CH2O and HCO behind shock waves

The thermal decomposition of formaldehyde was investigated behind shock waves at temperatures between 1675 and 2080 K. Quantitative concentration time profiles of formaldehyde and formyl radicals were measured by means of sensitive 174 nm VUV absorption (CH₂O) and 614 nm FM spectroscopy (HCO), respectively. The rate constant of the radical forming channel (1a), CH₂O + M → HCO + H + M, of the unimolecular decomposition of formaldehyde in argon was measured at temperatures from 1675 to 2080 K at an average total pressure of 1.2 bar, k_1a = 5.0 × 10¹⁵ exp(‐308 kJ mol^?1/RT) cm³ mol^?1 s^?1. The pressure dependence, the rate of the competing molecular channel (1b), CH₂O + M → H₂ + CO + M, and the branching fraction β = k_1a/(kA_1a + k_1b) was characterized by a two‐channel RRKM/master equation analysis. With channel (1b) being the main channel at low pressures, the branching fraction was found to switch from channel (1b) to channel (1a) at moderate pressures of 1–50 bar. Taking advantage of the results of two preceding publications, a decomposition mechanism with six reactions is recommended, which was validated by measured formyl radical profiles and numerous literature experimental observations. The mechanism is capable of a reliable prediction of almost all formaldehyde pyrolysis literature data, including CH₂O, CO, and H atom measurements at temperatures of 1200–3200 K, with mixtures of 7 ppm to 5% formaldehyde, and pressures up to 15 bar. Some evidence was found for a self‐reaction of two CH₂O molecules. At high initial CH₂O mole fractions the reverse of reaction (6), CH₂OH + HCO ? CH₂O + CH₂O becomes noticeable. The rate of the forward reaction was roughly measured to be k₆ = 1.5 × 10¹³ cm³ mol^?1 s^?1. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 157–169 2004     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

A model based technique for online identification of malfunctions in rotor systems is discussed. Presence of fault changes the dynamic behavior of the system. This change is taken into account by equivalent loads acting on the undamaged system model. Equivalent loads are fictitious forces and moments acting on the undamaged system model, which generate a dynamic behavior identical to that of the real damaged system. The mathematical representation of equivalent loads is referred to as Fault Model. The work focuses on developing a fault model for a transverse fatigue crack in shaft and testing it through simulated studies. The basic principle of the technique is validated for unbalance identification, through numerical simulations as well as by experiments on a real rotor system.     

Application of ultrafine-dispersed diamonds in electroplating

The results obtained upon the electrochemical deposition of composite coatings containing ultrafine-dispersed diamonds produced by detonation synthesis are generalized. The main advantages of such coatings over the well-known composite electrochemical coatings are revealed.     

Electron Metal-Dielectric Phase Transitions in Semiconductors under Pressure

The effect of uniform pressure on the character of metal-dielectric transitions in compensated weakly- and highly doped semiconductors (WHDCS) is considered. The influence of hybridization of resonance quasilocalized impurity states with band continuum states on the transition is shown. Minimum metallic conductivities in p-CdSnAs₂ are determined for Mott and Anderson transitions. Special features of the metal-dielectric transformation in weakly-doped narrow- and high energy-gap semiconductors are discussed for the case of hydrogen-like impurities. Anderson localization in WHDCS is also considered. Phase diagrams are presented.