Photoluminescence Study on Charge Transfer Behavior of Poly(3‐hexylthiophene) and PCBM Blends

Charge transfer behavior of Poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl eser (PCBM) in solutions and in films were examined by photoluminescence (PL) spectroscopy. PL study in solutions indicated that separation distance between P3HT and PCBM affected charge transfer efficiency more seriously than the interface area issue between P3HT and PCBM. P3HT/PCBM film showed very effective photo‐induced charge transfer before post‐thermal annealing on the bi‐layer P3HT/PCBM film. Charge transfer efficiency was gradually diminished by the annealing‐induced phase separation between P3HT and PCBM as revealed by increasing PL emission intensity of P3HT.     

Solid-State Fermentation of Palm Kernel Cake with <Emphasis Type="Italic">Aspergillus flavus</Emphasis> in Laterally Aerated Moving Bed Bioreactor

Solid-state fermentation (SSF) was employed to enhance the nutritive values of palm kernel cake (PKC) for poultry feeding. Aspergillus flavus was isolated from local PKC and utilized to increase the mannose content of PKC via the degradation of β-mannan in PKC; evaluation was done for batch SSF in Erlenmeyer flasks and in a novel laterally aerated moving bed (LAMB) bioreactor. The optimum condition for batch SSF in flasks was 110% initial moisture content, initial pH 6.0, 30 °C, 855 μm particle size, and 120 h of fermentation, yielding 90.91 mg mannose g⁻¹ dry PKC (5.9-fold increase). Batch SSF in the LAMB at the optimum condition yielded 79.61 mg mannose g⁻¹ dry PKC (5.5-fold increase) within just 96 h due to better heat and mass transfer when humidified air flowed radially across the PKC bed. In spite of a compromise of 12% reduction in mannose content when compared with the flasks, the LAMB facilitated good heat and mass transfer, and improved the mannose content of PKC in a shorter fermentation period. These attributes are useful for batch production of fermented PKC feed in an industrial scale.     

Reverse orthogonal strategy for oligosaccharide synthesis

Herein, we report the invention of a novel expeditious concept for oligosaccharide synthesis. Unlike the classic orthogonal strategy based on leaving groups, the reverse approach is based on orthogonal protecting groups, herein p-methoxybenzyl and 4-pentenoyl, which allows for efficient oligosaccharide assembly in the reverse direction.     

Effects of stirring rate for thermal runaway reaction in cumene hydroperoxide manufacturing process using calorimetric techniques

A high temperature (1000 °C) thermochemical process for heavy metal removal from sewage sludge ash via the chloride pathway was investigated by thermogravimetry/differential thermal analysis (TG/DTA). TG and DTA measurements gave information about secession and evaporation of water, HCl, and heavy metal chlorides at different temperatures. Additionally, gaseous water and hydrochloric acid which occurred in the process were detected by an FT-IR detector that was coupled to the TG/DTA-system. Heavy metal chlorides which were also formed in the process cannot be detected by this technique. For that reason the outlet gas of the TG/DTA-system was discharged into washing flasks filled with water for absorption. The washing flasks were replaced in temperature steps of 50 °C and the heavy metal concentrations of the solutions were determined by ICP-OES. The temperature-dependent formation/evaporation of different heavy metal chlorides was analyzed and compared for two different thermochemical processes using magnesium chloride hydrate or calcium chloride hydrate as Cl-donors. In both cases evaporation of Cd, Cu, Pb, and Zn was observed from 600 °C, whereas As, Cr, and Ni remained in the solid state. The results were discussed against the background of thermodynamic calculations.     

Low-light-level cross-phase modulation with double slow light pulses

We report on the first experimental demonstration of low-light-level cross-phase modulation (XPM) with double slow light pulses based on the double electromagnetically induced transparency (EIT) in cold cesium atoms. The double EIT is implemented with two control fields and two weak fields that drive populations prepared in the two doubly spin-polarized states. Group velocity matching can be obtained by tuning the intensity of either of the control fields. The XPM is based on the asymmetric M-type five-level system formed by the two sets of EIT. Enhancement in the XPM by group velocity matching is observed. Our work advances studies of low-light-level nonlinear optics based on double slow light pulses.     

Phase separation phenomenon in MOCVD-grown GaInP epitaxial layers

In-rich and Ga-rich GaInP films were intentionally grown on (0 0 1) GaAs substrates by low-pressure MOCVD to investigate the effect of lattice strain on composition. High-resolution X-ray diffraction (HRXRD) measurement showed that a GaInP single layer exhibits a double-diffracted peak phenomenon. Such a double peak represents a composition separation in the grown film, resulting in two absorption cutoff energies in optical absorption analysis. Cross-sectional transmission electron microscopic (TEM) observation confirmed the composition separation in an In-rich GaInP film. Furthermore, the composition separation amount of a Ga-rich GaInP film after substrate removal was found to be ∼0.5%, which reflects the actual effect of lattice strain on composition during growth stage.     

A rainout model for the study of the additional exposure rate due to rainfall

A simplified rainout model is presented in this study. According to this model formulations have been derived to relate the exposure rate on the ground to the radon progeny concentration in raindrops as well as the radon concentration in cloud air. By normalizing the saturation exposure rate of the calculation to the HPIC measured value and by the use of reasonably assumed values for some other parameters, the radon progeny concentration in raindrops as well as the radon concentration in cloud air has been determined.     

Preparation and clinical application of immunomagnetic latex

Magnetic poly(methyl methacrylate) (PMMA)/poly(methyl methacrylate‐co‐methacrylic acid) [P(MMA–MAA)] composite polymer latices were synthesized by two‐stage soapless emulsion polymerization in the presence of magnetite (Fe₃O₄) ferrofluids. Different types and concentrations of fatty acids were reacted with the Fe₃O₄ particles, which were prepared by the coprecipitation of Fe(II) and Fe(III) salts to obtain stable Fe₃O₄ ferrofluids. The Fe₃O₄/polymer particles were monodisperse, and the composite polymer particle size was approximately 100 nm. The morphology of the magnetic composite polymer latex particles was a core–shell structure. The core was PMMA encapsulating Fe₃O₄ particles, and the shell was the P(MMA–MAA) copolymer. The carboxylic acid functional groups (COOH) of methacrylic acid (MAA) were mostly distributed on the surface of the composite polymer latex particles. Antibodies (anti‐human immunoglobulin G) were then chemically bound with COOH groups onto the surface of the magnetic core–shell composite latices through the medium of carbodiimide to form the antibody‐coated magnetic latices (magnetic immunolatices). The MAA shell composition of the composite latex could be adjusted to control the number of COOH groups and thus the number of antibody molecules on the magnetic composite latex particles. With a magnetic sorting device, the magnetic immunolatices derived from the magnetic PMMA/P(MMA–MAA) core–shell composite polymer latex performed well in cell‐separation experiments based on the antigen–antibody reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1342–1356, 2005