Some less usual properties of tetracyano complexes

The structure and reactivity of one unique molecule may be understood only in relation to its molecular surroundings. The non-stoichiometric forms of the tetracyano complexes M(B) _mM (CN)₄·nG (B=nitrogen or oxygen containing base; G=aromatic compound or H₂O,m0,n>0) are understood in this respect. Their stoichiometric or non-stoichiometric forms, with voids either completely or more often partially occupied, are responsible for their observed sorptive and resorptive abilities. The effects of the surroundings are correlated with the results of thermal analysis, magnetic measurements and their sorptive abilities.Dedicated to Professor H. M. Powell.     

Aggregation and decomposition of a pseudoisocyanine dye in dispersions of layered silicates

The optical properties of reaction systems composed from a pseudoisocyanine (PIC) solution and dispersed layered silicates were studied using visible spectroscopy. Two series of reduced-charge montmorillonites were used as the silicate materials. Each series consisted of eight samples with different layer charges, which were prepared from one parent material. Observed trends were verified with another series of dioctahedral and trioctahedral smectites of different layer charges, structure, and origin. The layer charge density of the silicates significantly affected the aggregation of PIC cations. In addition to the formation of J-aggregates, dye spectral bleaching was also observed. Silicates with very low charge densities induced neither significant aggregation nor spectral bleaching of the dye. The highest levels of PIC J-aggregate formation were found in dispersions of the layered silicates with a medium surface charge. However, reversible spectral bleaching was also observed in some cases. PIC dye cations probably change their conformations during the adsorption process, due to the tension resulting from the large size of the cations and the relatively high charge density at the silicate surface. The bleached dye recovers, at least partially, with the rearrangement and redistribution of the dye cations over the time. In contrast, the presence of silicates with very high charge densities (synthetic taeniolite and fluorohectorite) led to the very fast and irreversible decomposition of the PIC. Perhaps, the tension in adsorbed dye cations, induced by the high charge density at the silicate surface, resulted in significant destabilization and a decomposition reaction of the chromophore.     

Ab initio and density functional theory studies on the mechanism of nucleophilic vinylic substitution of 4<Emphasis Type="Italic">H</Emphasis>-pyran-4-one and 2-methyl-4<Emphasis Type="Italic">H</Emphasis>-pyran-4-one with ammonia

 Nucleophilic vinylic substitutions of 4H-pyran-4-one and 2-methyl-4H-pyran-4-one with ammonia were calculated by the B3LYP method using the 6-31G(d,p) basis set. Bulk solvent effects of aqueous solution were estimated by the polarized continuum and Poisson–Boltzmann self-consistent reaction field models using the 6-311+G(d,p) basis set. In the gas phase different mechanisms were found for the two reaction systems calculated. The reaction of 4H-pyran-4-one proceeds through enol, whereas a feasible path for the less reactive 2-methyl-4H-pyran-4-one is the mechanism through a keto intermediate. Addition of ammonia in concert with proton transfer is the rate-determining step ofthe reaction. The mechanism proceeding either by a bimolecular nucleophilic substitution (S_N2) or by one involving a tetrahedral zwitterionic intermediate is shown to be unlikely in the gas phase or nonpolar solution. The effects of bulk solvent not only consist in a reduction of the various activation barriers by about 25–40 kJ mol⁻¹ but also in a change in the reaction mechanism. Received 26 May 2002 / Accepted 26 July 2002 / Published online: 14 February 2003     

Immobilization in biotechnology and biorecognition: from macro- to nanoscale systems

Biological molecules such as enzymes, cells, antibodies, lectins, peptide aptamers, and cellular components in an immobilized form are extensively used in biotechnology, in biorecognition and in many medicinal applications. This review provides a comprehensive summary of the developments in new immobilization materials, techniques, and their practical applications previously developed by the authors. A detailed overview of several immobilization materials and technologies is given here, including bead cellulose, encapsulation in ionotropic gels and polyelectrolyte complexes, and various immobilization protocols applied onto surfaces. In addition, the review summarises the screening and design of an immobilization protocol, practical applications of immobilized biocatalysts in the industrial production of metabolites, monitoring, and control of fermentation processes, preparation of electrochemical/optical biosensors and biofuel cells.     

2‐(4‐Hydroxy­phenyl)‐4,4‐dimethyl‐2‐oxazoline: X‐ray and density functional theory study

In the crystal structure of the title compound, C₁₁H₁₃NO₂, there are strong inter­molecular O—H⋯N hydrogen bonds which, together with weak intra­molecular C—H⋯O hydrogen bonds, lead to the formation of infinite chains of mol­ecules, held together by weak inter­molecular C—H⋯O hydrogen bonds. A theoretical investigation of the hydrogen bonding, based on density functional theory (DFT) employing periodic boundary conditions, is in agreement with the experimental data. The cluster approach shows that the influence of the crystal field and of hydrogen‐bond formation are responsible for the deformation of the 2‐oxazoline ring, which is not planar and adopts a ⁴T₃ (^C3T_C2) conformation.     

Monomers for Adhesive Polymers, 6

Summary: 1,3‐Bis(methacrylamido)propane‐2‐yl dihydrogen phosphate ( 1 ) was synthesised by phosphorylation of 1,3‐bis(methacrylamido)‐2‐hydroxypropane ( 2 ) with phosphorus oxychloride in tetrahydrofuran (THF) in the presence of triethylamine (TEA). The structure of the new monomer 1 was characterised by IR, ¹H NMR, ¹³C NMR and ³¹P NMR spectroscopies, elemental analysis and mass spectrometry. The monomer dissolves well in water, ethanol or aqueous THF and shows an improved hydrolytic stability compared to the corresponding methacrylate‐based dihydrogen phosphates. 1 was homopolymerised in ethanol with 2,2′‐azoisobutyronitrile (AIBN) as the initiator at 55–75 °C under the formation of an insoluble, cross‐linked product. Aqueous solutions of 1 are strongly acidic and enable to etch enamel and dentin. Nevertheless, 1 did not show any cytotoxic effect. Furthermore, the adhesive properties of 1 were measured.

1,3‐Bis(methacrylamido)propane‐2‐yl dihydrogen phosphate.     

Capillary electrophoresis and ultra-high-performance liquid chromatography methods in clinical monitoring of creatinine in human urine: A comparative study

Creatinine is an important diagnostic marker and is also used as a standardization tool for the quantitative evaluation of exogenous/endogenous substances in urine. This study aimed at evaluating and comparing three analytical approaches, based on hyphenations of different separation [two-dimensional capillary isotachophoresis (CITP–CITP), capillary zone electrophoresis (CZE), ultra-high-performance liquid chromatography (UHPLC)] and detection [conductivity (CD), ultraviolet (UV), tandem mass spectrometry (MS/MS)] techniques, for their ability to provide reliable clinical data along with their suitability for the routine clinical use (cost, simplicity, sample throughput). The developed UHPLC–MS/MS, CITP–CITP–CD, and CZE–UV methods were characterized by favorable performance parameters, such as linearity (r ˃ 0.99), precision (relative standard deviation, 0.22–2.97% for the creatinine position in analytical profiles), and recovery (87.1–115.1%). Clinical data, obtained from the analysis of 24 human urine samples by a reference enzymatic method, were comparable with those obtained by the tested methods (Passing–Bablok regression and Bland–Altman analysis), approving their usefulness for the routine clinical use. In this context, the UHPLC–MS/MS method provides benefits of enhanced orthogonality/accuracy and high sample throughput (threefold shorter total analysis times than the CE methods), whereas advantages of the CE methods for routine labs are simplicity and low cost of both the instrumentation and measurements.     

Molecular aggregation of rhodamine dyes in dispersions of layered silicates: influence of dye molecular structure and silicate properties

The molecular aggregation of six rhodamine dyes (rhodamine 560, B, 3B, 19, 6G, 123) in layered silicate (saponite and fluorohectorite) dispersions was investigated by using visible (vis) spectroscopy. The dye molecular aggregation was influenced by the properties of both the silicates and the dyes themselves. The layer charge of the silicates enhanced the molecular aggregation of the hydrophilic, cationic dyes. The presence of a carboxyl acid group in the dye molecules inhibited adsorption of the dyes on the surface of fluorohectorite, a silicate with a high charge density. A lower or no adsorption could be observed by vis spectroscopy. Strong association of the dyes to the silicate surface led to remarkable changes in the dye spectra, mainly due to the molecular aggregation. Dye assemblies initially formed after mixing the dye solutions with silicate dispersions were unstable. Decomposition of the dye molecular assemblies, and the formation of new species or molecular aggregate rearrangements, were studied on the bases of time-difference spectra. The reaction pathways were specific, not only for the dyes, depending upon their molecular structure and properties, but also on the silicate substrates.     

Syntheses of octasubstituted zinc azaphthalocyanines with thiophene or thiophene combined with sulfanyl,amino or imido substituents: Influence of the substituents on photochemical and photophysical properties

Several octasubstituted zinc azaphthalocyanines (ZnAzaPcs) of the tetrapyrazinoporphyrazine type have been synthesized as potential sensitizers for photodynamic therapy (PDT). Octasubstituted complexes, with thiophen-2-yl, thiophen-3-yl or benzo[b]thiophen-3-yl peripheral groups, were synthesized and characterized. Octa(thiophen-2-yl) ZnAzaPc is a better singlet oxygen producer and has a red shifted UV absorption Q-band compared to both thiophen-3-yl and benzo[b]thiophen-3-yl substituted ZnAzaPcs. Thus, the thiophen-2-yl substituent is better suited for our purpose. Unsymmetrically substituted ZnAzaPcs were synthesized by cyclotetramerisations of pyrazine-2,3-dicarbonitriles attached to one thiophen-2-yl group and one alkylsulfanyl, thiomorpholinyl or imide group. Constitutional isomers were detected by NMR spectroscopy for some of these complexes. Compared to unsubstituted ZnAzaPc, red shifted Q-bands were observed for all these complexes, due to the presence of thiophen-2-yl groups. The least promising complexes are ZnAzaPcs with thiomorpholine or imide peripheral substituents, i.e. where the peripheral substituents are attached to the macrocycle through nitrogen atoms. Low singlet oxygen quantum yields (Φ_Δ) and also low fluorescence quantum yields (Φ_F) were observed for these ZnAzaPcs. In the case of combined thiophen-2-yl and alkylsulfanyl substituents, the values of Φ_Δ were the highest and reached values of approximately 0.69.