Curcumin Inhibits the Sortase A Activity of the Streptococcus mutans UA159

Streptococcus mutans (S. mutans) forms part of the commensal microflora and is deemed to be the major pathogen responsible for the generation of dental caries. The enzyme, sortase A enzyme, modulates the surface properties and cariogenicity of S. mutans. Curcumin has been reported to be an inhibitor of Staphylococcus aureus sortase A. In this study, inhibition of a purified S. mutans UA159 sortase A by curcumin was evaluated. Curcumin exerted strong inhibitory activity with a half maximal inhibitory concentration (IC₅₀) of 10.2?±?0.7 μM which was lower than the minimum inhibitory concentration of 175 μM and the minimum bactericidal concentration of 350 μM. These results indicated that curcumin is a S. mutans UA159 sortase A inhibitor and therefore represents as a promising anticaries agent.     

PMAA microgel surface-supported phase transfer catalyst as reusable microreactors for ultra-deep desulfurization

The reusable microreactors, poly(methacrylic acid) (PMAA) microgels surfacely covered with 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride (AEM) and K₂{W(=O)(O₂)₂(H₂O)}₂ (W2) complexes, have been synthesized by using an ion exchange reaction between AEM located on PMAA microgels and W2 in aqueous solution. The final composite microspheres and intermediate products are characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectrophotometer, and thermogravimetric analysis, respectively. The results indicated the PMAA/AEM/W2 composite microspheres with surface-wrinkling morphology and core-shell structure. The feasibility of the composite microspheres used as reusable microreactors in catalytic oxidation of dibenzothiophene (DBT) was investigated. Additionally, the effects of some factors, including the amount of the microreactors, temperature, H₂O₂/DBT molar ratio, the loaded amount of AEM, DBT concentration, and recycling times, on the catalytic oxidation were examined. The results demonstrated that the prepared composite microspheres possess high catalytic performance and reusability in the catalytic oxidation of DBT.     

Cloud point extraction combined with graphite furnace atomic absorption spectrometry for the determination of chromium species and their distribution in cigarette and cigarette ash

In this article, the contents and distribution of total chromium, Cr(III) and Cr(VI) in various cigarettes and cigarette ashes were determined by using a cloud point extraction (CPE) separation/preconcentration combined with graphite furnace atomic absorption spectrometric (GFAAS) detection. Different extraction reagents, such as tetramethylammonium hydroxide (TMAH), Na₂HPO₄, Na₂CO₃/NaOH, NaOH and H₂O, were tested for the extraction of Cr species, and the extraction efficiency was estimated. The experimental results showed that TMAH was the most efficient extraction reagent for the analyte in cigarette samples. By using the established method, the total chromium, Cr(III) and Cr(VI) in various cigarettes and cigarette ashes were determined and their distribution was studied. It was found that Cr(III) is a main species in cigarettes, but that it can be partly oxidized to Cr(VI) during smoking.     

Simultaneous extraction and determination of fluoroquinolones,tetracyclines and sulfonamides antibiotics in soils using optimised solid phase extraction chromatography-tandem mass spectrometry

An analytical method was developed for the simultaneous extraction and determination of 18 fluoroquinolones (FQs), tetracyclines (TCs) and sulfonamides (SAs) antibiotics from soils using solid phase extraction and liquid chromatography-tandem mass spectrometry. The soils were extracted by different solvents with the help of mechanical shaking and ultrasonic treatment at 59?kHz, followed by a strong anion exchange (SAX) cartridge to clean up soil samples and a hydrophilic lipophilic balance (HLB) cartridge as enrichment. The method was evaluated by testing the following variables: extraction solvents, the type of SPE cartridges, solvent volumes, initial spiking levels and soil types (silty clay loam and clay loam soils). The soil extraction method was validated using these two types of soils, representing two typical agricultural soils in northern China. For 2?g soil, the extraction steps with the mixture of potassium phosphate buffer and acetonitrile (ACN) (1/1, v/v, pH 3.2) provided satisfactory recoveries. In the clay loam soil, the recoveries of all the compounds were from 56% to 89% at the spiking level of 50?µg?kg^?1 soil, and from 69% to 97% at the spiking level of 200?µg?kg^?1 soil, respectively. Recoveries in silty clay loam soil were similar to that in clay loam. The method was successfully employed using soil samples collected from a farmland and afforestion area irrigated with sewage in northern China. The result indicates that trace antibiotics in sewage may accumulate in soil irrigated by river water containing sewage.     

荧光增白剂28的光漂白特性研究

荧光增白剂28(F-28)为欧盟标准EN 648-2006《与食品接触的纸和纸板-荧光增白剂牢度的测定》中判断食品接触材料所含荧光增白剂是否向食品中迁移的标样。我们发现,在规定的波长365nm紫外光激发下,F-28所制成的标样会出现光漂白现象。因此,本文对F-28的光漂白特性进行研究。结果表明,紫外辐照时间为60s时,四级(3mg/L)、三级(8mg/L)、二级(31mg/L)、一级(125mg/L)滤纸和玻纤的最大荧光值衰减率分别为0.16%、0.29%、0.92%、0.44%和2.59%、1.99%、0.49%、3.14%;当辐照时间延长到1800 s时,最大荧光值衰减率分别增加为4.67%、4.22%、5.51%、2.75%和35.37%、39.78%、28.09%、39.38%。因此,在对食品接触材料是否含有荧光增白剂以及是否迁移的测试中,必须考虑光漂白因素。同时,滤纸作为迁移实验载体,在降低光漂白和稳定性方面比玻纤更具优势。     

聚苯胺/醋酸纤维素复合膜的制备及其超级电容特性

通过电化学原位聚合法制备多孔网状结构的聚苯胺(PANI)/醋酸纤维素(CA)复合膜电极,该复合膜的内层(与电极接触的一面)呈墨绿色,外层呈白色。采用原子力显微镜(AFM)、扫描电镜(SEM)、红外光谱(FTIR)对其形貌和化学组成进行表征。通过循环伏安、恒电流充放电和电化学阻抗研究了复合膜电极的超级电容特性。结果表明,多孔网状结构的PANI/CA复合材料具有良好的电容性能,其比电容可达到410F/g,并且该超级电容器具有较小的内阻和较好的循环稳定性,300次循环后,容量仍维持在342F/g,比电容的保持率为83.4%。     

An ionic liquid-based sorbent for solid phase extraction of trace iron(Ш) from biological and natural water samples

A new ionic liquid modified silica gel sorbent was prepared from the reaction of active silica gel with N-3-(-3-triethoxysilylepropyl)-3-methylimidazolium chloride ([(TESP)MIm]Cl). This sorbent was exploited as solid phase extractant for separation and preconcentration of metal ions prior to their determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). It was found that it can selectively adsorb Fe(Ш). Identification of the surface modification was performed on the basis of FT-IR. Experimental conditions for effective adsorption of trace Fe(Ш) were optimised using both batch and column procedures. At pH 3, Fe(Ш) could be quantitatively adsorbed and completely eluted by using 2?mL of 0.1?mol?L^?1 of HCl. 150?mL of sample solution was adopted as the maximum sample volume and a high enrichment factor of 75 was obtained. Most common coexisting ions did not interfere with the separation and preconcentration of Fe(Ш) at optimal conditions. The maximum static adsorption capacity of the sorbent was 37.0?mg?g^?1. The detection limit of the present method was 0.48?µg?L^?1, and the relative standard deviation (R. S. D.) was lower than 1.7%. The method was successfully applied to the preconcentration of trace Fe(Ш) in biological and natural water samples with satisfactory results.     

Solid-phase extraction and preconcentration of trace Pb(II) from water samples with folic acid modified silica gel

A chelating matrix prepared by immobilising folic acid on silica gel-bound amine phase was used as a new solid-phase extractant. This sorbent has been developed only for preconcentration of trace Pb(II) prior to determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Experimental conditions were investigated by batch and column procedures. The optimum pH value for the separation of Pb(II) on the new sorbent was 4.0. The adsorbed Pb(II) was quantitatively eluted by 2.0?cm³ of 0.5?mol?dm^?3 of HCl. Common coexisting ions did not interfere with the separation and determination of Pb(II). The maximum static adsorption capacity of the sorbent under optimum conditions was found to be 69.23?mg?g^?1 for Pb(II). The detection limit of the method defined by International Union of Pure and Applied Chemistry was 0.28?ng?cm^?3. The relative standard deviation (RSD) of the method was lower than 2.0% (n?=?8). The developed method has been validated by analysing certified reference materials and successfully applied to the determination of Pb(II) in water samples with satisfactory results.     

Theoretical Insights into the Nature of Halogen Bonding in Prereactive Complexes

Benchmark quality geometries and interaction energies for the prereactive halogen‐bonded complexes of dihalogens and ammonia, including hypothetical astatine containing dihalogens, have been produced via explicitly correlated coupled cluster methods. The application of local electron correlation partitioning reveals dispersion, electrostatics and ionic substitutions all contribute significantly to the interaction energy, with a linear relationship between the ionic substitutions and the degree of charge transfer. Potential energy curves for H₃N???ClF show that as the relative orientations of the two subunits are manipulated appreciable interactions can be found at considerably angular displaced geometries, signifying lower directionality in halogen bonding than previously supposed.     

Mechanism of Ketone Allylation with Allylboronates as Catalyzed by Zinc Compounds: A DFT Study

The mechanism of the allylation reaction between 4‐chloroacetophenone and pinacol allylboronates catalyzed by ZnEt₂ with alcohols was investigated using density functional theory (DFT) at the M05‐2X/6‐311++G(d,p) level. The calculations reveal that the reaction prefers to proceed through a double γ‐addition stepwise reaction mechanism rather than a Lewis acid‐catalyzed concerted one. The intermediate with a four‐coordinated boron center, which is formed through proton transfer from EtOH to the ethyl group of ZnEt₂ mediated by the boron center, is the active species and an entrance for the catalytic cycle. The latter is composed of three elementary steps: 1) boron to zinc transmetalation leading to the formation of allylzincate species, 2) electrophilic addition of ketone to allylzincate species, and 3) generation of the final product with recovery of the catalyst. The boron to zinc transmetalation step has the largest energy barrier of 61.0 kJ mol^?1 and is predicted to be the rate‐determining step. The calculations indicate that the additive EtOH plays important roles both in lowering the activation free energy for the formation of the four‐coordinated boron active intermediate and in transforming the low catalytic activity ZnEt₂ into high activity zinc alkoxide species. The alcohols with a less sterically encumbering R group might be the effective additives. The substituted groups on the allylboronates might primarily affect the boron to zinc transmetalation, and the allylboronates with substituents on the C_γ atom is poor in reactivity. The comparison of the catalytic effect between the zinc compounds investigated suggest that Zn(OEt)₂, Zn(OH)₂, and ZnF₂ exhibit higher catalytic efficiency for the boron to zinc transmetalation due to the activation of the B? C_α bond through orbital interactions between the p orbitals of the EtO, OH, F groups and the empty p orbital of the boron center.