Coffee-ring effects in laser desorption/ionization mass spectrometry

This report focuses on the heterogeneous distribution of small molecules (e.g. metabolites) within dry deposits of suspensions and solutions of inorganic and organic compounds with implications for chemical analysis of small molecules by laser desorption/ionization (LDI) mass spectrometry (MS). Taking advantage of the imaging capabilities of a modern mass spectrometer, we have investigated the occurrence of “coffee rings” in matrix-assisted laser desorption/ionization (MALDI) and surface-assisted laser desorption/ionization (SALDI) sample spots. It is seen that the “coffee-ring effect” in MALDI/SALDI samples can be both beneficial and disadvantageous. For example, formation of the coffee rings gives rise to heterogeneous distribution of analytes and matrices, thus compromising analytical performance and reproducibility of the mass spectrometric analysis. On the other hand, the coffee-ring effect can also be advantageous because it enables partial separation of analytes from some of the interfering molecules present in the sample. We report a “hidden coffee-ring effect” where under certain conditions the sample/matrix deposit appears relatively homogeneous when inspected by optical microscopy. Even in such cases, hidden coffee rings can still be found by implementing the MALDI-MS imaging technique. We have also found that to some extent, the coffee-ring effect can be suppressed during SALDI sample preparation.     

Molecule-binding dependent assembly of split aptamer and γ-cyclodextrin: A sensitive excimer signaling approach for aptamer biosensors

A highly sensitive and selective fluorescence aptamer biosensors for the determination of adenosine triphosphate (ATP) was developed. Binding of a target with splitting aptamers labeled with pyrene molecules form stable pyrene dimer in the γ-cyclodextrin (γ-CD) cavity, yielding a strong excimer emission. We have found that inclusion of pyrene dimer in γ-cyclodextrin cavity not only exhibits additive increases in quantum yield and emission lifetime of the excimer, but also facilitates target-induced fusion of the splitting aptamers to form the aptamer/target complex. As proof-of-principle, the approach was applied to fluorescence detection of adenosine triphosphate. With an anti-ATP aptamer, the approach exhibits excimer fluorescence response toward ATP with a maximum signal-to-background ratio of 32.1 and remarkably low detection limit of 80 nM ATP in buffer solution. Moreover, due to the additive fluorescence lifetime of excimer induced by γ-cyclodextrin, time-resolved measurements could be conveniently used to detect as low as 0.5 μM ATP in blood serum quantitatively.     

Construction of microscale structures in enclosed microfluidic networks by using a magnetic beads based method

A large number of microscale structures have been used to elaborate flowing control or complex biological and chemical reaction on microfluidic chips. However, it is still inconvenient to fabricate microstructures with different heights (or depths) on the same substrate. These kinds of microstructures can be fabricated by using the photolithography and wet-etching method step by step, but involves time-consuming design and fabrication process, as well as complicated alignment of different masters. In addition, few existing methods can be used to perform fabrication within enclosed microfluidic networks. It is also difficult to change or remove existing microstructures within these networks. In this study, a magnetic-beads-based approach is presented to build microstructures in enclosed microfluidic networks. Electromagnetic field generated by microfabricated conducting wires (coils) is used to manipulate and trap magnetic beads on the bottom surface of a microchannel. These trapped beads are accumulated to form a microscale pile with desired shape, which can adjust liquid flow, dock cells, modify surface, and do some other things as those fabricated microstructures. Once the electromagnetic field is changed, trapped beads may form new shapes or be removed by a liquid flow. Besides being used in microfabrication, this magnetic-beads-based method can be used for novel microfluidic manipulation. It has been validated by forming microscale dam structure for cell docking and modified surface for cell patterning, as well as guiding the growth of neurons.     

Resonant-Mie-scattering of aggregates of phosphomolybdate and papaverine for measuring activities and screening inhibitors of cyclic nucleotide phosphodiesterase isozymes

A resonant-light-scattering (RLS) method was proposed to quantify phosphate for screening inhibitors of isozymes of cyclic nucleotide phosphodiesterase (PDE). In acidified mixtures of phosphate, papaverine and molybdate, there were aggregates exhibiting micrometre sizes, no absorbance peaks over 360 nm but strong RLS peaks at 392 nm; Mie scattering thus accounted for the RLS signals. When papaverine was added before molybdate to acidified samples of phosphate, RLS signals at 392 nm were stable from 5 to 25 min since the addition of molybdate; after optimization, phosphate from 0.40 to 3.60 μM was quantifiable. This RLS method tolerated 60 mg L⁻¹ proteins besides common PDE inhibitors and dimethyl sulfoxide in acidified samples of phosphate; the integration of this RLS method with the coupled action of a phosphomonoesterase on PDE product was thus rational to measure PDE activities without the removal of proteins in samples. By quantifying activities of a truncated mutant of human PDE4B2 via this RLS method, Michaelis–Menten constant, inhibition constants of rolipram, papaverine and theophylline varied over three magnitudes and were consistent with those estimated by an improved malachite green assay of phosphate, respectively. Hence, this novel RLS method was promising for screening inhibitors of PDE isozymes.     

Responsive polymers for analytical applications: A review

Stimuli-responsive polymers are capable of translating changes in their local environment to changes in their chemical and/or physical properties. This ability allows stimuli-responsive polymers to be used for a wide range of applications. In this review, we highlight the analytical applications of stimuli-responsive polymers that have been published over the past few years with a focus on their applications in sensing/biosensing and separations. From this review, we hope to make clear that while the history of using stimuli-responsive polymers for analytical applications is rich, there are still a number of directions to explore and exciting advancements to be made in this flourishing field of research.     

Two New Sesquiterpenes from Euonymus alatus

Two new sesquiterpenes, 1 and 2 , as well as the five known compounds 3 – 7 , were isolated from the stems of Euonymus alatus. Compounds 2 – 7 have a β‐dihydroagarofuran skeleton. The structures of these compounds were elucidated mainly by spectroscopic methods (1D‐, 2D‐NMR, ESI‐MS, and HR‐ESI‐MS). We also report the X‐ray crystal structure of evonine ( 3 ) for the first time.     

Novel Synthesis of Tri- and Penta-Coordinate Phosphorous Saccharide

Two novel tricoordinate phosphorous saccharides, methyl 4,6-O-benzylidene- α -D-glucopyranoside 2,3-cyclic phosphite ethyl ester 3 and its mannoside analogue 5 were synthesized by the reaction of protected pyrannosides (1 and 4) with ethyl dichlorophosphite 2. Addition of 2,3-butanedione to 3 resulted in the formation of pentacoordinate phosphorous compound 6.     

Organic Reactions in Ionic Liquids: Ionic Liquid Ethylammonium Nitrate–Promoted Knoevenagel Condensation of Meldrum's Acid With Aromatic Aldehydes

The Knoevenagel condensation of Meldrum's acid with aromatic aldehydes proceeded efficiently in a reusable ionic liquid, ethylammonium nitrate, at room temperature in the absence of any catalyst with high yields.     

The Synthesis of 1,3-Bis(Phenylseleno)-2-Propanol

A general and efficient synthetic method of 1,3-bis(phenylseleno)-2-propanol by reducing diphenyl diselenides with sodium borohydride in basic environment and then reacting with epichlorohydrin are described.