Novel gas chromatography-mass spectrometry database for automatic identification and quantification of micropollutants

A novel gas chromatography-mass spectroscopy (GC-MS) database for identification and quantification of micropollutants in environmental and food samples is reported. GC retention times, calibration curves, and mass spectra of nearly 700 chemicals were registered in the database, and the GC retention times of registered chemicals in actual samples were predicted from the retention times of n-alkanes measured before sample analysis. Differences between predicted and actual retention times were less than 3 s, an accuracy that is nearly identical to that obtained by analysis of standard substances. After the retention times were predicted, a calibration file for the GC-MS instrument was created from the predicted retention times, calibration curves, and mass spectra of the registered chemicals. With the resulting calibration file, automated identification of all the chemicals in actual samples was possible without the use of standards, and the identification method was as reliable as conventional methods. When the GC inlet, column, and tuning conditions were adjusted using GC-MS performance check standards, relative standard deviations of 20% or less for determination values could be obtained. More than 90% of the chemicals in the database could be detected at a sensitivity sufficient for all practical purposes (100 pg or less). Because each chemical in the database, to which new substances can easily be added, can be determined in 1 h, micropollutants in samples can be analyzed efficiently and inexpensively.     

Two-dimensional hydrophilic interaction chromatography coupling anion-exchange and hydrophilic interaction columns for separation of 2-pyridylamino derivatives of neutral and sialylated N-glycans

A novel chromatographic approach coupling anion-exchange (diethylaminoethylene) and hydrophilic-interaction (amide or zwitterionic type) columns was developed for the separating of 2-pyridylamino derivatives of N-glycans (PA-N-glycans). This is a kind of on-line, two-dimensional (2D) separation approach in hydrophilic-interaction chromatography (called the 2D-HILIC method), analogous to that of coupling cation- (or anion-, or mixed ion-) exchange and reversed-phase columns in hydrophobic interaction (reversed-phase) chromatography. The efficiency of the 2D-HILIC method was tested with biantennary neutral and sialylated PA-N-glycan standards by properly combining linear gradient elutions of water-acetonitrile and spiked-salt (ammonium acetate) elutions. The retention time RSDs of all the peaks in three sequential runs of a 100 min cycle are less than 0.52%, which indicates a reasonably good repeatability of the 2D-HILIC method. Then, the method was applied to a complex mixture of PA-N-glycans from human serum proteins. It was demonstrated that the neutral PA-N-glycans and mono-, di-, tri-, and tetrasialylated PA-N-glycans are able to be eluted in turn according to the number of sialic acids in an automated (programmed) single run.     

Synthesis and light‐emitting properties of carbazole‐based copolymers bearing cyano‐substituted arylenevinylene chromophore

Two arylenevinylene compounds bearing the cyano group at α‐position ( 6 ) and β‐position ( 9 ) from the dialkoxylphenylene unit were synthesized, in which the molecular termini were functionalized with 3‐bromocarbazole. The Suzuki coupling copolymerization of these compounds with 1,4‐bis[(3′‐bromocarbazole‐9′‐yl)methylene]‐2,5‐didecyloxybenzene and 9,9‐dihexylfluorene‐2,7‐bis(boronic acid) was carried out to obtain copolymers ( cp67 and cp97 ) containing the cyano‐substituted arylenevinylene fluorophore of 7 mol %. Model compounds ( 6 ′ and 9 ′) corresponding to the arylenevinylene fluorophore were also prepared. The UV spectra of copolymers resembled that of homopolymer hp with no arylenevinylene segment in both CHCl₃ solution and thin film. The emission maxima of copolymers in CHCl₃ (394 nm) agreed with that of homopolymer indicating that the emission bands originated from the carbazole‐fluorene‐carbazole segment. The emission maximum wavelength of copolymer cp67 in thin film (477 nm) indicated fluorescence from the cyano‐substituted arylenevinylene fluorophore because of the occurrence of fluorescence resonance electron transfer. In contrast, copolymer cp97 showed fluorescence at 528 nm to suggest the formation of a new emissive species such as a charge‐transfer complex (exciplex). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 91–98, 2010     

Quantitative visualization of temperature field in non-luminous flame by flame reaction technique

Abstract  

An experimental technique for measuring a temperature field in an axisymmetric non-luminous flame is developed using the flame reaction technique combined with the inverse Abel transformation. Flame visualization is carried out using alkali metal solution of Potassium (K), which is supplied to a premixed methane/air flame in a form of spray mist. The basic principle of this technique is based on the measurement of local emission intensity distribution visualized by the flame reaction, which is a function of temperature according to the Maxwell–Boltzmann statistics of thermodynamics. The relationship between the local intensity and the temperature is obtained from the calibration study, in which the local intensity is evaluated from the line of sight intensity by the inverse Abel transformation, and the temperature is measured by thermocouple. This technique is successfully applied to the measurement of local temperature distribution in steady and flickering premixed methane/air flame. The temperature field in the flickering flame indicates that the local temperature oscillates periodically with the flickering frequency, and the highest temperature is found along the flame front and in the merging region.     

Water-soluble constituents of dill

From the water-soluble portion of the methanol extract of dill (fruit of Anethum graveolens L.), which has been used as a spice and medicine, thirty-three compounds, including a new monoterpenoid, six new monoterpenoid glycosides, a new aromatic compound glucoside and a new alkyl glucoside were obtained. Their structures were clarified by spectral investigation.     

Synthesis and molecular geometry of an achiral 30-crown-12 polyacetal from alpha-cyclodextrin

Periodate oxidation of alpha-cyclodextrin followed by borohydride reduction readily provided an octadeca-hydroxymethyl-substituted 30-crown-12 polyacetal 1, its 30-membered macrocycle being composed of six meso-butanetetrol/glycolaldehyde acetal units, which is, consequently, optically inactive. Its solid-state molecular geometry emerged from the X-ray structural analysis of the well-crystallizing octadeca-acetate 2, which revealed the undulated macrocycle to be molded into three loops with a unique order of succession of the -CHR-CHR-O-CHR-O- units: alternating gauche- and anti-conformations of the meso-butanetetrol portions and consecutive disposition of the glycolaldehyde-acetoxymethyl groups above and below the mean-plane of the macrocycle. In solution, however, as evidenced by 1H- and 13C-NMR spectra, the macrocycle is highly flexible at ambient and higher temperatures, its mobility becoming distinctly restricted only below -20 degrees C.     

Sorption and diffusion of water vapor in polyimide films

Sorption and diffusion of water vapor are investigated gravimetrically for polyimide films. The activity dependence of the solubility and diffusion coefficients, S and D, respectively, is classified under four types: (1) constant S and D type, (2) dual-mode sorption and transport type, (3) dual-mode type followed by a deviation due to a plasticization effect at high vapor activity, and (4) constant S and D type followed by a deviation due to water cluster formation at high activity. For the dual-mode type, the Henry's law component is much larger than the Langmuir component except at low activity, and therefore deviation in behavior from the first type is small. S is larger for polyimides with higher content of polar groups such as carbonyl, carboxyl, and sulfonyl. D is larger for polyimides with a higher fraction of free space, with some exceptions. The polyimide from 3,3′,4,4′-biphenyltetracarboxylic dianhydride and dimethyl-3,7-diaminodibenzothiophene-5, 5-dioxide belongs to the third type and displays both large S and large D. The polyimide from 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 4,4′-oxydianiline belongs to the fourth type, and has the largest D but rather small S because of the hydrophobic C(CF₃)₂ groups. © 1992 John Wiley & Sons, Inc.     

Ferroelectric liquid crystalline phase transition of (S)-hexakis(4-(4'-(6-methyl)octyloxy)biphenoxy) cyclotriphosphazene

(S)-Hexakis(4-(4'-(6-methyl)octyloxy)biphenoxy)cyclotriphosphazene (SMOCP) was synthesized in a search for new ferroelectric liquid crystalline compounds. We found an enantiotropic ferroelectric smectic C* phase between 419 and 441 K in SMOCP by using polarizing microscopy and DSC measurements. The spontaneous polarization was estimated to be -130.5 μCm^-2 at 437.6 K, several times larger than that of DOBAMBC ((S)-2-methylbutyl 4-(4'-decyloxybenzylidene)aminocinnamate.     

Comment nonexistence of difficulties with the graph theory of aromaticity

It is stressed that, at present, there are no difficulties with the graph theory of aromaticity as long as a careful definition of resonance energy is used as a measure of aromatic stabilization.