Measurements of branching fractions for B --> K pi and B --> pi pi decays

We report measurements of branching fractions for B --> K pi and B --> pi pi decays based on a data sample of 449 x 10(6) BB[over] pairs collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. We also measure the ratios of partial widths for B-->Kpi decays, namely R(c) identical with 2Gamma(B(+) --> K(+) pi(0))/Gamma(B(+) --> K(0) pi(+)) = 1.08+/-0.06+/-0.08 and R(n) identical with Gamma(B(0) --> K(+) pi(-))/2 Gamma(B(0) --> K(0) pi(0)) = 1.08+/-0.08+/-0.08, where the first and the second errors are statistical and systematic, respectively. These ratios are sensitive to enhanced electroweak penguin contributions from new physics; the new measurements are, however, consistent with standard model expectations.     

Confined space and effective interactions of multiple self-avoiding chains

We study the link between three seeming-disparate cases of self-avoiding polymers: strongly overlapping multiple chains in dilute solution, chains under spherical confinement, and the onset of semidilute solutions. Our main result is that the free energy for overlapping n chains is independent of chain length and scales as n9/4, slowly crossing over to n3, as n increases. For strongly confined polymers inside a spherical cavity, we show that rearranging the chains does not cost an additional free energy. Our results imply that, during cell cycle, global reorganization of eukaryotic chromosomes in a large cell nucleus could be readily achieved.     

Observation of a charmoniumlike state produced in association with a J/psi in e+e- annihilation at sqrt[s] approximately equal to 10.6 GeV

We report the first observation of a charmoniumlike state recoiling from the J/psi in the inclusive process e+e- -->J/psi+anything at a mass of (3.943+/-0.006+/-0.006) GeV/c{2}. We also observe the decay of this state into D*D[over ] and determine its intrinsic width to be less than 52 MeV/c{2} at the 90% C.L. These results are obtained from a 357 fb{-1} data sample collected with the Belle detector near the Upsilon(4S) resonance, at the KEKB asymmetric-energy e+e- collider.     

Measurement of inclusive Ds, D0, and J/psi rates and determination of the Bs(*)Bs(*) production fraction in bb Events at the Upsilon(5S) resonance

The inclusive production of D(s), D(0), and J/psi mesons is studied using a 1.86 fb(-1) data sample collected on the Upsilon(5S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. The number of bb events in this Upsilon(5S) data sample is determined. We measure the branching fractions B(Upsilon(5S)-->D(s)X)/2=(23.6+/-1.2+/-3.6)%, B(Upsilon(5S)-->D(0)X)/2=(53.8+/-2.0+/-3.4)%, and B(Upsilon(5S)-->J/psiX)/2=(1.030+/-0.080+/-0.067)%. From the D(s) and D(0) inclusive branching fractions the ratio f(s)=(18.0+/-1.3+/-3.2)% of B(s)(*)B(s)(*) to the total bb quark pair production at the Upsilon(5S) energy is obtained in a model-dependent way.     

Observation of time-dependent CP violation in B0 --> eta'K0 decays and improved measurements of CP asymmetries in B0 --> phiK0, KS0KS0KS0 and B0 --> J/psiK0 decays

We present improved measurements of CP-violation parameters in B(0) --> phiK(0), eta(')K(0), KS(0)KS(0)KS(0) decays based on a sample of 535 x 10(6) BB pairs collected at the Upsilon(4S) resonance with the Belle detector at the KEKB energy-asymmetric e(+)e(-) collider. We obtain sin2phi1(eff)=+0.64+/-0.10(stat)+/-0.04(syst) for B(0) --> eta(')K(0), +0.50+/-0.21(stat)+/-0.06(syst) for B(0) --> phiK(0), and +0.30+/-0.32(stat)+/-0.08(syst) for B(0) --> KS(0)KS(0)KS(0) decays. We have observed CP violation in the B(0) --> eta(')K(0) decay with a significance of 5.6 standard deviations. We also perform an improved measurement of CP asymmetries in B(0) --> J/psiK(0) decays and obtain sin2phi1=+0.642+/-0.031(stat)+/-0.017(syst).     

An optimization method for designing SENSE imaging RF coil arrays

An optimization method in RF coil array design for SENSE imaging is described. Using this method the optimized RF coil geometries can be calculated numerically given the required SENSE imaging performance. Although this method can be applied to optimize the RF coil arrays for both 1D and 2D SENSE imaging, to demonstrate the potential applications of this method, we designed RF coil arrays for 2D SENSE imaging and compared their performance by simulation. An optimized 4-channel receive-only RF coil array designed for 2D SENSE imaging was implemented and tested to demonstrate the feasibility of the proposed technique. Imaging results showed reasonable agreement with the simulations, thus the method can be applied to RF coil array designs for SENSE imaging when optimum imaging performance is desired.     

Mechanical properties and degradation studies of poly(D,L‐lactide‐co‐glycolide) 50:50/graphene oxide nanocomposite films

Poly(D,L‐lactide‐co‐glycolide) 50:50 (PLGA)/graphene oxide (GO) nanocomposite films were prepared with various GO weight fractions. A significant enhancement of mechanical properties of the PLGA/GO nanocomposite films was obtained with GO weight fractions. The incorporation of only 5 wt% of GO resulted in an ~2.5‐fold and ~4.7‐fold increase in the tensile strength and Young's modulus of PLGA, respectively. The thermomechanical behaviors of composite films were investigated by dynamic mechanical analysis. Results indicated that the values of T_g and storage moduli of the PLGA/GO composites were higher than those of the pristine PLGA. The improvement in oxygen barrier properties of composites was presumably attributed to the filler effect of the randomly dispersed GO throughout the PLGA matrix. In this work, we also studied in vitro biodegradation behavior. PLGA/GO composite films were hydrolyzed at 37°C for periods up to 49 days. Because of the presence of GO nanosheets, degradation of composite films took place more slowly with increasing GO amounts. Copyright © 2013 John Wiley & Sons, Ltd.     

Biocatalytic Photosynthesis with Water as an Electron Donor

Efficient harvesting of unlimited solar energy and its conversion into valuable chemicals is one of the ultimate goals of scientists. With the ever‐increasing concerns about sustainable growth and environmental issues, numerous efforts have been made to develop artificial photosynthetic process for the production of fuels and fine chemicals, thus mimicking natural photosynthesis. Despite the research progress made over the decades, the technology is still in its infancy because of the difficulties in kinetic coupling of whole photocatalytic cycles. Herein, we report a new type of artificial photosynthesis system that can avoid such problems by integrally coupling biocatalytic redox reactions with photocatalytic water splitting. We found that photocatalytic water splitting can be efficiently coupled with biocatalytic redox reactions by using tetracobalt polyoxometalate and Rh‐based organometallic compound as hole and electron scavengers, respectively, for photoexcited [Ru(bpy)₃]²⁺. Based on these results, we could successfully photosynthesize a model chiral compound (L ‐glutamate) using a model redox enzyme (glutamate dehydrogenase) upon in situ photoregeneration of cofactors.     

Facile One‐Pot,One‐Step Synthesis of a Carbon Nanoarchitecture for an Advanced Multifunctonal Electrocatalyst

A one‐pot/one‐step synthesis strategy was developed for the preparation of a nitrogen‐doped carbon nanoarchitecture with graphene‐nanosheet growth on the inner surface of carbon nanotubes (CNTs). The N‐graphene/CNT hybrids exhibit outstanding electrocatalytic activity for several important electrochemical reactions as a result of their unique morphology and defect structures, such as high but uniform nitrogen doping, graphene insertion into CNTs, considerable surface area, and the presence of iron nanoparticles. The high‐yield synthetic process features high efficiency, low‐cost, straightforward operation, and simple equipment.