Identification and localization of the fatty acid modification in ghrelin by electron capture dissociation

Electron capture dissociation (ECD) has been demonstrated to be an effective fragmentation technique for characterizing the site and structure of the fatty acid modification in ghrelin, a 28-residue growth-hormone-releasing peptide that has an unusual ester-linked n-octanoyl (C8:0) modification at Ser-3. ECD cleaves 21 of 23 possible backbone amine bonds, with the product ions (c and z· ions) covering a greater amino acid sequence than those obtained by collisionally activated dissociation (CAD). Consistent with the ECD nonergodic mechanism, the ester-linked octanoyl group is retained on all backbone cleavage product ions, allowing for direct localization of this labile modification. In addition, ECD also induces the ester bond cleavage to cause the loss of octanoic acid from the ghrelin molecular ion; the elimination process is initiated by the capture of an electron at the protonated ester group, which is followed by the radical-site-initiated reaction known as -cleavage. The chemical composition of the attached fatty acid can be directly obtained from the accurate Fourier transform ion cyclotron resonance (FTICR) mass measurement of the ester bond cleavage product ions.     

Comparison and characterization of polysaccharides from natural and cultured <Emphasis Type="Italic">Cordyceps</Emphasis> using saccharide mapping

Comparison and characterization of polysaccharides from natural and cultured Cordyceps on the basis of their chemical characteristics such as glycosidic linkages were performed for the first time using saccharide mapping. The results showed that polysaccharides from most of the natural and cultured Cordyceps had similar responses to enzymatic digestion. These polysaccharides mainly contained (1→4)-β-D-glucosidic linkages, and (1→4)-α-glucosidic, (1→6)-α-glucosidic, 1,4-β-D-mannosidic, as well as (1→4)-α-D-galactosiduronic linkages also existed in some polysaccharides. Especially, natural and cultured Cordyceps polysaccharides could be discriminated on the basis of high performance liquid chromatography profiles of pectinase hydrolysates, which is helpful to control the quality of polysaccharides from Cordyceps.     

Polymer-precursor-derived (am-) SiC/TiC composites for resistive heaters in large volume multi-anvil high pressure/high-temperature apparatus

(Amorphous-)SiC/TiC composites for resistive tubular heaters in HP/HT experiments were obtained via a polymer-precursor process. A slurry consisting of a commercial SiC-precursor polymer (allylhydridopolycarbosilane, AHPCS) and TiC powder as conductive filler was applied to the inner walls of zirconia insulation tubes, using a centrifugation-casting method. Resistive coatings with homogeneous thickness of ～200 μm were obtained. The heaters were tested in octahedral multi-anvil assemblies at ～10 GPa with simultaneous recording of heating voltage and current. Up to a maximum temperature of ～1800°C they showed temperature vs. power characteristics reproducible from batch to batch, with resistance decreasing from 0.08 to 0.02 Ω during heating. Microstructural characterization using SEM/EDX was carried out on the recovered SiC/TiC composite material, as well as on pristine resistive heaters directly after coating and curing to 230°C, and after additional pyrolysis at 900°C in argon. In all cases, a stable composite microstructure of an interpenetrating network of TiC particles with either silicon carbide polymer precursor or an amorphous SiC phase were found. The composites were characterized by XRD and thermogravimetry. Further improvement of coating procedure and materials combination (precursor/filler/insulator substrate) may result in advanced coatings, operational well beyond 2000°C.     

Automated determination of size and morphology information from soot transmission electron microscope (TEM)-generated images

The thermophoretic sampling of particulates from hot media, coupled with transmission electron microscope (TEM) imaging, is a combined approach that is widely used to derive morphological information. The identification and the measurement of the particulates, however, can be complex when the TEM images are of low contrast, noisy, and have non-uniform background signal level. The image processing method can also be challenging and time consuming, when the samples collected have large variability in shape and size, or have some degree of overlapping. In this work, a three-stage image processing sequence is presented to facilitate time-efficient automated identification and measurement of particulates from the TEM grids. The proposed processing sequence is first applied to soot samples that were thermophoretically sampled from a laminar non-premixed ethylene-air flame. The parameter values that are required to be set to facilitate the automated process are identified, and sensitivity of the results to these parameters is assessed. The same analysis process is also applied to soot samples that were acquired from an externally irradiated laminar non-premixed ethylene-air flame, which have different geometrical characteristics, to assess the morphological dependence of the proposed image processing sequence. Using the optimized parameter values, statistical assessments of the automated results reveal that the largest discrepancies that are associated with the estimated values of primary particle diameter, fractal dimension, and prefactor values of the aggregates for the tested cases, are approximately 3, 1, and 10 %, respectively, when compared with the manual measurements.     

Optimal orientation field to manufacture magnetostrictive composites with high magnetostrictive performance

Magnetostrictive properties have relationship with the applied orientation field during the preparation of giant magnetostrictive composites. To understand the dependence of the optimal orientation field on particle volume fraction, composites with 20%, 30% and 50% particles by volume were fabricated by distributing Terfenol-D particles in an unsaturated polyester resin under various orientation fields. Their magnetostrictive properties were tested without pre-stress at room temperature. The results indicate that as the particle volume fraction increases, the optimal orientation field increases. The main reason for this phenomenon is the packing density for the composites with higher particle volume fraction is larger than that for those with lower particle content.     

5种丹参主要成分及微结构的检测及综合表征

利用X射线荧光(XRF)、粉末X射线衍射(PXRD)和傅里叶变换红外光谱(FTIR)分析技术,对安国栽培的5个不同种质丹参主要成分及微结构检测,对各样品中多种元素种类及含量、晶体及非晶体成分以一套综合特征图的方式对其表征;该谱将同种属不同种质丹参中的共有成分和细微差异之处给与直观地描述。3种技术共有制样简单,测定速度快,再现性和客观性好的特点;可用于药材优良品种的选育、中药材GAP种植条件的指导、药材产地特征、主要成分及微结构的检测及表征、质量稳定性的控制及真伪鉴别。     

全内反射双通道观察双标记荧光染色的非洲绿猴肾细胞

在像增强型电荷耦合器件(ICCD)荧光显微成像装置上用双通道成像方法观察了非洲绿猴肾细胞(COS-7)中由EGFP转染的肌球蛋白Myosin 15a,以及Rhodamine标记的细胞微丝。为观察微丝尖端的肌球蛋白Myosin 15a,采用了高灵敏、低损伤的全内反射激发荧光显微成像技术,并在双通道中选用合适滤光片组合消除两种荧光染料间的光谱串扰。实验观测到非洲绿猴肾细胞内过表达的肌球蛋白Myosin 15a和伸长的微丝的分布情况,尤其是清晰观察到Myosin 15a在微丝上的分布。为全内反射双通道荧光成像技术在生命科学中的应用展示了广阔的前景。     

Chitosan hydrogel,as a biological macromolecule-based drug delivery system for exosomes and microvesicles in regenerative medicine: a mini review

Cellulose - Extracellular vesicles are membrane-packed entities that are involved in various physiological and pathological processes. Recently, the role of exosomes and microvesicles in...     

Monitoring the Thiol/Thiophenol Molecule-Modulated Plasmon-Mediated Silver Oxidation with Dark-Field Optical Microscopy

Surface plasmon can trigger or accelerate many photochemical reactions, especially useful in energy and environmental industries. Recently, molecular adsorption has proven effective in modulating plasmon-mediated photochemistry, however the realized chemical reactions are limited and the underlying mechanism is still unclear. Herein, by using in situ dark-field optical microscopy, the plasmon-mediated oxidative etching of silver nanoparticles (Ag NPs), a typical hot-hole-driven reaction, is monitored continuously and quantitatively. The presence of thiol or thiophenol molecules is found essential in the silver oxidation. In addition, the rate of silver oxidation is modulated by the choice of different thiol or thiophenol molecules. Compared with the molecules having electron donating groups, the ones having electron accepting groups accelerate the silver oxidation dramatically. The thiol/thiophenol modulation is attributed to the modulation of the charge separation between the Ag NPs and the adsorbed thiol or thiophenol molecules. This work demonstrates the great potential of molecular adsorption in modulating the plasmon-mediated photochemistry, which will pave a new way for developing highly efficient plasmonic photocatalysts.     

Nitrogen Donor Protection for Atomically Precise Metal Nanoclusters

Surface organic ligands are critical in dictating the structures and properties of atomically precise metal nanoclusters. In contrast to the conventionally used thiolate, phosphine and alkynyl ligands, nitrogen donor ligands have not been used in the protection for well-defined metal nanoclusters until recently. This review focuses on recent developments in atomically precise metal nanoclusters stabilized by different types of nitrogen donor ligands, in which the synthesis, total structure determination and various properties are covered. We hope that this review will provide insights into the rational design of N donor-protected metal nanoclusters in terms of structural and functional modulation.