Rapid determination of underivatized pyroglutamic acid, glutamic acid, glutamine and other relevant amino acids in fermentation media by LC-MS-MS

Determination of amino acids in a complex matrix without derivatization is advantageous, however, difficulties are found in both the detection and the separation of those compounds. In this study, a rapid and reliable LC-MS-MS method for the quantitation of underivatized amino acids in exocellular media was established. Injections were made directly after centrifugation of the samples, without further preparation. The separation of seven underivatized amino acids was achieved on a reversed-phase C18 column with pentadecafluorooctanoic acid as a volatile ion-pair reagent, and the specific detection of most amino acids was achieved by MS-MS of the specific transitions [M + H]+-->[M + H - 46]+. The calibration curves of all analytes were linear over the range of 1.0-1000 microg ml(-1) and the detection limits ranged from 0.1 to 5 ng ml(-1), with an injection volume of 20 microl. The inter-day and intra-day precisions ranged from 2.6 to 5.7% and 4.8 to 8.2%, respectively; the mean recoveries of the seven analytes were 81-104%, 91-107% and 93-101% respectively at the spiked level of 10, 40 and 200 microg ml(-1). A large number of fermentation samples were analysed using this method. The technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of amino acids from other biological matrices.     

A Novel Catalyst for Liquid Phase Hydrogenation of m-Dinitrobenzene to m-Phenylenediamine

A novel lanthana-promoted nickel catalyst supported on silica for the liquid phase hydrogenation of m-dinitrobenzene to m-phenylenediamine was prepared by an incipient wetness sequential impregnation method. It was found that Ni-La/SiO2 catalyst exhibited high activity and stability for m-dinitrobenzene hydrogenation. Over this catalyst, the conversion of m-dinitrobenzene and the yield of m-phenylenediamine were up to 97.1% and 93.5%, respectively,at 373 K and 2.6 MPa hydrogen pressure after reaction for 1 h.     

PDMS-based microfluidic device with multi-height structures fabricated by single-step photolithography using printed circuit board as masters

We have developed a method for fabricating microfluidic devices with multi-height structures using single step photolithography. The whole fabrication process is executed by conventional printed circuit board (PCB) technology without the need of having access to clean room facilities. Specifically designed "windows" and "rims" architectures were printed on films that were used as photomasks. Different levels of protruding features on the PCB master were produced by exposing a photomask followed by chemical wet etching. Poly(dimethylsiloxane) (PDMS) was then moulded against the positive relief master to generate microfluidic structures. In this report, we described the fabrication of a microfluidic device featured with a multi-height "sandbag" structure for particle entrapment and peripheral microchannels. Controlled immobilization of biological cells and immunocytochemcial staining assays were performed to demonstrate the applicability of the microfluidic device for cellular analysis. The integrity of the microdevice remained stable under applied pressure, indicating the robustness of the elastic PDMS structures for analytical operation. The simple microfabrication process requires only low-cost materials and minimal specialized equipment and can reproducibly produce mask lines of about 20 microm in width, which is sufficient for most microfluidic applications.     

CAST/CNMR: highly accurate C NMR chemical shift prediction system considering stereochemistry

Accurate, practical prediction of ¹³C NMR chemical shifts has been achieved with a new system, CAST/CNMR, taking account of stereochemistry. The CAST/CNMR system has solved the critical problem of the accurate distinction of differences and similarities in stereochemical structures around a specific carbon, which has not yet been achieved by any other database-oriented system for prediction of ¹³C NMR chemical shifts. CAST/CNMR uses a three-dimensional structural database together with a ¹³C NMR spectral database. Absolute/relative configurational and conformational structural information are described by the CAST (CAnonical-representation of STereochemistry) coding method. This paper provides an overview of the CAST/CNMR system, and describes its application to two natural products as examples.     

Studies on Hydroiodination and Deconjugation of 5—Aryloxy—（thiophenyl）—3—pentyn—2—one

One-pot hydroiodination and deconjugation of 5-aryloxy(or thiophenyl)-3-pentyn-2-one with a reagent system of sodium iodide/trimethylsilyl chloride/water in acetonitrile at 25℃ have been described.The plasuible mechanism was discussed.The reaction provided a simple and useful method for the preparation of (Z)-β-substituted β，γ-enones and (Z)-β-substituted α，β-unsaturated ketones.     

Electrospray ionisation and ion-trap fragmentation of substituted 3,4-dihydro-2(1H)-pyridin-2-ones

A variety of 5-alkoxycarbonyl-4-aryl-6-methyl-3,4-dihydro-2(1H)-pyridones and hexahydrofuro[3,4-b]-2(1H)-pyridones have been investigated by electron impact (EI) and electrospray ionisation (ESI) techniques. Sequential product ion fragmentation (MS(n)) was performed to elucidate the degradation pathways for these compounds. Comparisons are made between positive and negative even-electron ions from ESI spectra and the molecular radical cations obtained under EI conditions. The data collected in this paper provide information on the strong impact that different substituents have on the ion fragmentation process.     

Furostanol saponins with inhibitory action against COX-2 production from Tupistra chinensis rhizomes

Two furostanol saponins were obtained from the n-butanol fraction of methanol extract from Tupistra chinensis rhizomes,a folk medicine of Shennongjia Forest District of Hubei Province.Their structures were determined as (25S)-26-O-(β-D-glucopyranosyl)- furost-1β,3β,22α,26-tetrol-3-O-β-D-glucopyranosyl-(1→4)-β-D-glucopyranosyl-(1→2)-β-D-glucopyranoside (1) and (25R)- 26-O-(β-D-glucopyranosyl)-furost-1β,3β22α,26-tetrol 3-O-β-D-glucopyranosyl-(1→4)-β-D-glucopyranosyl-(1→2)-β-D-glu- copyranoside (2),on basis of chemical and spectroscopic evidences.1 and 2 displayed marked inhibitory action towards COX-2 production in macrophages of the rat abdomen induced by LPS at 20μg/mL.     

Amperometric Biosensor for Hydrogen Peroxide Based on Electrodeposited Sub-micrometer Gold Modified Glassy Carbon Electrode

IntroductionAmperometricbiosensorofhydrogenperoxideisofpracticalimportancebecauseofitswideapplicationsinchemical,biological,clinical,environmentalandmanyotherfields.Forimprovementofsensor抯quality,vari-ouskindsofchemicalmodificationmethodshavebeendevelopedforreducingredoxoverpotentialsofH2O2atelectrodesurfaces,increasingthedetectionsensitivity,linearrange,stabilityandlivetime.Ithasbeenshownthattheuseofsub-micrometersizedmetalparticlessuchasPt-blackcansignificantlyimprovethequalityofthebiosens…     

Formation of dinuclear,macrocyclic, and chain structures from HgI(2) and a semirigid benzimidazole-based bridging ligand: an example of ring-opening supramolecular isomerism

The reactions of HgI(2) with the semirigid ditopic ligand 1,3-bis(benzimidazol-1-ylmethyl)-2,4,6-trimethylbenzene (bbimms) afforded three new complexes, [Hg(2)(mu-I)(2)I(2)(bbimms)] (1), [Hg(2)I(4)(bbimms)(2)] (2), and catena-poly[HgI(2)(bbimms)] (3). The ligand and all complexes have been structurally characterized by single-crystal X-ray diffraction. 1 is a triply bridged dinuclear complex comprised of two Hg(II) ions, one bridging ligand, two bridging I(-) anions, and two terminal I(-) anions. 2 is a dinuclear metallamacrocycle comprised of two Hg(II) ions, two bridging ligands, and four terminal I(-) anions, while 3 is a helical chain with the repeating unit of HgI(2)(bbimms). 2 and 3 can be classified as supramolecular isomers, and both are related to the triply bridged precursor 1 via the addition of one more ligand in a ring-opening process.     

A highly stereoselective synthesis of the C10–C31 (BCDEF ring) portion of pinnatoxin A

An efficient, highly stereoselective synthesis of the C10–C31 (BCDEF ring) portion of pinnatoxin A has been achieved utilizing tandem double hemiketal formation/intramolecular hetero-Michael addition to construct the 6,5,6-dispiroketal (BCD ring) system and subsequent intramolecular ketalization to form the 5,6-bicycloketal (EF ring) system as key steps.