Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

Oxamic acid derivaties in heterocyclic synthesis: Preparation of 1,2,4-triazolo[1,5-a]pyrazine derivatives

N-Aryl-N-(α-phenylphenacyl)oxamoyl chlorides react with N³-arylsubstituted amidrazones to give functionalized 1,2,4-triazoles which undergo ring-closure by the action of thionyl chloride to give 1,2,4-triazolo[1,5-a]-pyrazinium chlorides in excellent yields.     

1‐(1‐Benzoylpropen‐2‐yl)‐3‐methylisothiosemicarbazide

The structure of the title S‐alkyl­ated iso­thio­semicarbazide, C₁₂H₁₅N₃OS, was determined by single‐crystal diffractometry and compared with the structures of other compounds containing the S‐alkyl­thio­semicarbazide moiety. Such structures cluster into two groups, according to the different orientation of the –SR group with respect to the hydrazine N atom of the thio­semicarbazide. The cis arrangement is preferred by most mol­ecules in the solid state, in spite of the possibility of intramolecular N—H?N interactions in the opposite orientation.     

Characterization and determination of 28 elements in fly ashes collected in a thermal power plant in Argentina using different instrumental techniques

Different techniques were selected for comprehensive characterization of seven samples of fly ashes collected from the electrostatic precipitator of the San Nicolás thermal power plant (Buenos Aires, Argentina). Particle size was measured using laser based particle size analyzer. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the mineral phase present in the matrix consisting basically of aluminosilicates and large amounts of amorphous material. The predominant crystalline phases were mullite and quartz. Major and minors elements (Al, Ca, Cl, Fe, K, Mg, Na, S, Si and Ti) were detected by energy dispersive X-ray analysis (EDAX). Trace elements (As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, V and Zn) content was quantified by inductively coupled plasma optical emission spectrometry (ICP OES). Different acid mixtures and digestion procedures were compared for subsequent ICP OES measurements of the dissolved samples. The digestion procedures used were: i) a mixture of FH + HNO₃ + HClO₄ (open system digestion); ii) a mixture of FH + HNO₃ (MW-assisted digestion); iii) a mixture of HF and aqua regia (MW-assisted digestion). Instrumental neutron activation analysis (INAA) was employed for the determination of As, Ba, Co, Cr, Ce, Cs, Eu, Fe, Gd, Hf, La, Lu, Rb, Sb, Sc, Sm, Ta, Tb, Th, U and Yb. The validation of the procedure was performed by the analysis of two certified materials namely, i) NIST 1633b, coal fly ash and ii) GBW07105, rock. Mean elements content spanned from 41870 μg g^− 1 for Fe to 1.14 μg g^− 1 for Lu. The study showed that Fe (41870 μg g^− 1) ? V (1137 μg g^− 1) > Ni (269 μg g^− 1) > Mn (169 μg g^− 1) are the main components. An enrichment, with respect to crustal average, in many elements was observed especially for As, V and Sb that deserve particular interest from the environmental and human health point of view.     

Fused Mesoionic Heterocycles: Synthesis of 1,2,4-triazolo(4,3-b)-1,2,4-triazole derivatives

A number of mesoionic compounds derivatives of the bicyclic system 1,2,4-triazolo(4,3-b)-1,2,4-triazole have been prepared from 4-amino-1-methyl-3,5-bis(methylthio)-1,2,4-triazolium iodide and aryl isothiocyanates.     

NMR chemical shifts in the low–pH form of a-chymotrypsin. A QM/MM and ONIOM–NMR study

 The relationship between hydrogen bonding and NMR chemical shifts in the catalytic triad of low-pH α-chymotrypsin is investigated by combined use of the effective fragment potential [(2001) J Phys Chem A 105:293] and ONIOM–NMR [(2000) Chem Phys Lett 317:589] methods. Our study shows that while the His57 N^δ1−H bond is stretched by a relatively modest amount (to about 1.060 ?) this lengthening, combined with the polarization due to the molecular environment, is sufficient to explain the experimentally observed chemical shifts of 18.2 ppm. Furthermore, the unusual down-field shift of H^ɛ1 (9.2 ppm) observed experimentally is reproduced and shown to be induced by interactions with the C=O group of Ser214 as previously postulated. The free-energy cost of moving H^δ1 from His57 to Asp102 is predicted to be 5.5 kcal/mol. Received: 26 September 2001 / Accepted: 6 September 2002 / Published online: 21 January 2003 Contribution to the Proceedings of the Symposium on Combined QM/MM Methods at the 222nd National Meeting of the American Chemical Society, 2001 Correspondence to: J. H. Jensen e-mail: jan-jensen@uiowa.edu Acknowledgements. This work was supported by a Research Innovation Award from the Research Corporation and a type G starter grant from the Petroleum Research Fund. The calculations were performed on IBM RS/6000 workstations obtained through a CRIF grant from the NSF (CHE-9974502) and on supercomputers at the National Center for Supercomputer Applications at Urbana-Champaign. The authors are indebted to Visvaldas Kairys for help with the CHARMM program, and to Daniel Quinn for many helpful discussions.     

A ferrocene-based heteroditopic ligand for electrochemical sensing of cations and anions

A ferrocene-based heteroditopic receptor containing urea and crown ether units shows electrochemical responses to dihydrogenphosphate and fluoride anions. K+ cations can only be detected in the presence of dihydrogenphosphate.     

TOPS-MODE based QSARs derived from heterogeneous series of compounds. Applications to the design of new herbicides

A new application of TOPological Sub-structural MOlecular DEsign (TOPS-MODE) was carried out in herbicides using computer-aided molecular design. Two series of compounds, one containing herbicide and the other containing nonherbicide compounds, were processed by a k-Means Cluster Analysis in order to design the training and prediction sets. A linear classification function to discriminate the herbicides from the nonherbicide compounds was developed. The model correctly and clearly classified 88% of active and 94% of inactive compounds in the training set. More specifically, the model showed a good global classification of 91%, i.e., (168 cases out of 185). While in the prediction set, they showed an overall predictability of 91% and 92% for active and inactive compounds, being the global percentage of good classification of 92%. To assess the range of model applicability, a virtual screening of structurally heterogeneous series of herbicidal compounds was carried out. Two hundred eighty-four out of 332 were correctly classified (86%). Furthermore this paper describes a fragment analysis in order to determine the contribution of several fragments toward herbicidal property; also the present of halogens in the selected fragments were analyzed. It seems that the present TOPS-MODE based QSAR is the first alternate general "in silico" technique to experimentation in herbicides discovery.     

Total syntheses of four stereoisomers of 4alpha-hydroxy-1beta,7beta-peroxy- 10betaH-guaia-5-ene

[reaction: see text]. The first total syntheses of four stereoisomers of 4alpha-hydroxy-1beta,7beta-peroxy-10betaH-guaia-5-ene are reported starting from the readily available (+)-dihydrocarvone. These compounds have been synthesized from dienes (-)-isoguaiene and (-)-10-epi-isoguaiene by tandem ene hydroperoxylation-[4 + 2] cycloaddition with O(2) followed by selective reduction. The structure of the natural 4alpha-hydroxy-1beta,7beta-peroxy-10betaH-guaia-5-ene isolated from Liabum floribundum has been confirmed.