Effect of Groundwater Composition on Arsenic Detection by Bacterial Biosensors

A luminescent bacterial biosensor was used to quantify bioavailable arsenic in artificial groundwater. Its light production above the background emission was proportional to the arsenite concentration in the toxicologically relevant range of 0 to 0.5 μM. Effects of the inorganic solutes phosphate, Fe(II) and silicate on the biosensor signal were studied. Phosphate at a concentration of 0.25 g L⁻¹ phosphate slightly stimulated the light emission, but much less than toxicologically relevant concentrations of the much stronger inducer arsenite. No effect of phosphate was oberved in the presence of arsenite. Freshly prepared sodium silicate solution at a concentration of 10 mg L⁻¹ Si reduced the arsenite-induced light production by roughly 37%, which can be explained by transient polymerization leading to sequestration of some arsenic. After three days of incubation, silicate did not have this effect anymore, probably because depolymerization occurred. In the presence of 0.4 mg L⁻¹ Fe(II), the arsenite-induced light emission was reduced by up to 90%, probably due to iron oxidation followed by arsenite adsorption on the less soluble Fe(III) possibly along with some oxidation to the stronger adsorbing As(V). Addition of 100 μM EDTA was capable of releasing all arsenic from the precipitate and to transform it into the biologically measurable, dissolved state. The biosensor also proved valuable for monitoring the effectiveness of an arsenic removal procedure based on water filtration through a mixture of sand and iron granules.     

Synthesis, structural, spectroscopic, and electrochemical characterization of high oxidation state diruthenium complexes containing four identical unsymmetrical bridging ligands

Six Ru2(6+) derivatives of the form Ru2(L)4(C[triple bond]CC6H5)(2), where L = 2-Fap, 2,3-F(2)ap, 2,4-F(2)ap, 2,5-F(2)ap, 3,4-F(2)ap, or 2,4,6-F(3)ap, are synthesized and characterized as to their electrochemical, spectroscopic, and/or structural properties. These compounds are synthesized from a reaction between LiC[triple bond]CC6H5 and Ru2(L)4Cl. Two of the investigated complexes exist in a (4,0) isomeric form while four adopt a (3,1) geometric conformation. These two series of geometric isomers are compared with previously characterized (4,0) Ru2(ap)4(C[triple bond]CC6H5)(2), (4,0) Ru2(F5ap)4(C[triple bond]CC6H5)(2), and (3,1) Ru2(F5ap)4(C[triple bond]CC6H5)(2). The overall data on the nine compounds thus provide an opportunity to systematically examine how the electrochemical and structural properties of these Ru2(6+) complexes vary with respect to isomer type and electronic properties of the bridging ligands.     

Macrocycle synthesis strategy based on step-wise “adding and reacting” three components enables screening of large combinatorial libraries

Macrocycles provide an attractive modality for drug development, but generating ligands for new targets is hampered by the limited availability of large macrocycle libraries. We have established a solution-phase macrocycle synthesis strategy in which three building blocks are coupled sequentially in efficient alkylation reactions that eliminate the need for product purification. We demonstrate the power of the approach by combinatorially reacting 15 bromoacetamide-activated tripeptides, 42 amines, and 6 bis-electrophile cyclization linkers to generate a 3780-compound library with minimal effort. Screening against thrombin yielded a potent and selective inhibitor (K_i = 4.2 ± 0.8 nM) that efficiently blocked blood coagulation in human plasma. Structure–activity relationship and X-ray crystallography analysis revealed that two of the three building blocks acted synergistically and underscored the importance of combinatorial screening in macrocycle development. The three-component library synthesis approach is general and offers a promising avenue to generate macrocycle ligands to other targets.

Combination of three efficient chemical reactions allows for solution-phase synthesis of 3780 macrocycles and identification of potent thrombin inhibitor.     

Decomposition of Gaseous Sulfide Compounds in Air by Pulsed Corona Discharge

The effectiveness of applying a pulsed corona discharge to the destruction of olfactory pollution in air was investigated. This paper presents a comparative study of the decomposition of three representative sulfide compounds in diluted concentrations: hydrogen sulfide (H₂S), dimethyl sulfide (DMS), and ethanethiol (C₂H₅SH), which could be completely removed when a sufficient but reasonable energy density was deposited in the gas. DMS showed the lowest energy cost (around 30 eV/molecules); C₂H₅SH and H₂S had an EC of respectively 45 eV and 115 eV. The efficiency of the non-thermal plasma process increased with decreasing the initial concentration of sulfide compounds, while the energy yield remained almost unchanged. SO₂ was the only identified byproduct of H₂S decomposition, but the sulfur balance suggests the formation of undetected SO₃. The byproducts analyzed during the degradation of DMS and C₂H₅SH enabled to propose a reaction mechanism, starting with radical attack and breaking of C–S bonds.     

Solid State NMR and TG/MS Study on the Transformation of Methyl Groups During Pyrolysis of Preceramic Precursors to SiOC Glasses

The sol-gel method was used to prepare two different starting gels containing SiCH₃-groups for the preparation of SiOC ceramics. To understand the role of Si—H bonds in the incorporation of carbon into the SiOC network, gels prepared from a 1:2 mixture of triethoxysilane and methyldiethoxysilane (T^HD^H2) and solely methyltriethoxysilane (T^Me) were investigated. Thermogravimetric analysis coupled with mass spectroscopy (TG-MS) in inert atmosphere was performed to attain an insight into the decomposition reactions involved during gel-glass transformation. Samples calcined at different temperatures up to 1000°C were characterized by ²⁹Si and ¹³C magic angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy. The presence of SiH groups in the starting gel allows an efficient conversion of Si—CH₃ groups into CSi₄ sites at lower temperatures. As a result, despite a much lower amount of carbon in the starting T^HD^H2 gel (C/Si = 0.33) compared to the T^Me gel (C/Si = 1), the amount of carbon inserted into the SiOC network of both glasses is equivalent, but the T^Me sample contains the 10 fold amount of free carbon.     

Octasubstituted metal-free phthalocyanine as core of phosphorus dendrimers: a probe for the properties of the internal structure

The synthesis of a new family of phosphorus dendrimers built from an octasubstituted metal-free phthalocyanine core is described up to generation 5. This core is used as a sensor and a probe for analyzing the properties of the internal structure and the influence of each structural part (core, branches, surface) upon the whole structure. UV-visible spectra show both a hyperchromic and bathochromic effect on the Q-bands with increasing generation, indicating that the chromophore is more isolated, and that the dendritic shell mimics a highly polar solvent. There is no evidence for aggregation, except for generation 0, showing again the isolation of the core. However, the dendritic shell is permeable to aqueous acids and bases, as demonstrated by the reversible splitting of the Q-band in an acidic medium (neutral form of the phthalocyanine) and the single Q-band in a basic medium (dianionic form), even for generation 4. The fluorescence quantum yield for the neutral form increases with increasing generation. The dianionic form of generation 0 is poorly fluorescent, whereas generations 3 and 4 (G3 and G4) exhibit better fluorescence. The cores of G3 and G4 are highly sensitive optical sensors for H3O+ and OH-. These experiments are carried out in THF/water mixtures, and the influence of water on the structure has been checked. The hydrodynamic radius of generation 4 is measured by NMR diffusion (pulse gradient spin-echo) experiments. R(H) varies from 35.4 A at 4 mol % of water to 32.5 A at 64 mol % of water in THF, indicating the hydrophobic nature of these dendrimers.     

The Pathophysiology of Long COVID throughout the Renin-Angiotensin System

COVID-19 has expanded across the world since its discovery in Wuhan (China) and has had a significant impact on people’s lives and health. Long COVID is a term coined by the World Health Organization (WHO) to describe a variety of persistent symptoms after acute SARS-CoV-2 infection. Long COVID has been demonstrated to affect various SARS-CoV-2-infected persons, independently of the acute disease severity. The symptoms of long COVID, like acute COVID-19, consist in the set of damage to various organs and systems such as the respiratory, cardiovascular, neurological, endocrine, urinary, and immune systems. Fatigue, dyspnea, cardiac abnormalities, cognitive and attention impairments, sleep disturbances, post-traumatic stress disorder, muscle pain, concentration problems, and headache were all reported as symptoms of long COVID. At the molecular level, the renin-angiotensin system (RAS) is heavily involved in the pathogenesis of this illness, much as it is in the acute phase of the viral infection. In this review, we summarize the impact of long COVID on several organs and tissues, with a special focus on the significance of the RAS in the disease pathogenesis. Long COVID risk factors and potential therapy approaches are also explored.     

Hierarchical structural optimization of laminated plates using polar representation

A novel methodology for the design of optimal uncoupled laminated plates under membrane only or bending only loading is introduced. This approach is supported by the polar representation of anisotropy. First, topology optimization, aimed at maximizing global stiffness of the structure, allows to find an optimal distribution of polar components. Then, based on the latter structural results, a matching feasible lamination sequence is determined.