Ab initio analytical potential energy surface and quasiclassical trajectory study of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+))-->OH(+)(X (3)Sigma(-))+H((2)S) reaction and isotopic variants

An analytical potential energy surface (PES) representation of the O(+)((4)S)+H(2)(X (1)Sigma(g) (+)) system was developed by fitting around 600 CCSD(T)/cc-pVQZ ab initio points. Rate constant calculations for this reaction and its isotopic variants (D(2) and HD) were performed using the quasiclassical trajectory (QCT) method, obtaining a good agreement with experimental data. Calculations conducted to determine the cross section of the title reaction, considering collision energies (E(T)) below 0.3 eV, also led to good accord with experiments. This PES appears to be suitable for kinetics and dynamics studies. Moreover, the QCT results show that, although the hypotheses of a widely used capture model are not satisfied, the resulting expression for the cross section can be applied within a suitable E(T) interval, due to errors cancellation. This could be a general situation regarding the application of this simple model to ion-molecule processes.     

Determination of Ba, Cd, Cu, Pb and Zn in saliva by isotope dilution direct injection inductively coupled plasma mass spectrometry

Trace elements in small sample volumes of saliva were determined by coupling a high efficiency direct injection nebulizer to inductively coupled plasma mass spectrometry and employing quantification by isotope dilution. Aliquots of 0.4 ml of human saliva were mixed with 0.1 ml of concentrated nitric acid and diluted to 2 ml with water. Sample solutions were spiked with an isotopic solution enriched in 135Ba, 112Cd, 65Cu, 206Pb and 66Zn. The amount of each isotope added to the samples and the measurement procedure were adjusted to attain precise analytical results calculated from the isotope ratios 135Ba/138Ba, 112Cd/114Cd, 65Cu/63Cu, 206Pb/208Pb and 66Zn/68Zn. Data acquisition for Ba, Cu and Zn isotopes was performed for a single sample injection of 50 microl and in another sample injection the Cd and Pb isotopes were measured. Concentrations ranging from 5.0 to 16 microg l(-1) for Ba, from 0.50 to 1.1 microg l(-1) for Cd, from 6.0 to 50 microg l(-1) for Cu, from 0.8 to 18.8 microg l(-1) for Pb and from 46.0 to 230 microg l(-1) for Zn were found in saliva samples. Detection limits of 0.11, 0.03, 0.40, 0.05 and 0.59 microg l(-1) were determined for Ba, Cd, Cu, Pb and Zn, respectively. The concentrations found by isotope dilution were in agreement with those of the completely digested samples quantified by external calibration. The direct analysis of 30 samples per hour was attained with the proposed procedure, avoiding time-consuming digestion steps, contamination risks and matrix effects.     

Ab initio potential energy surface, variational transition state theory, and quasiclassical trajectory studies of the F+CH4-->HF+CH3 reaction

In this work we present a study of the F+CH(4)-->HF+CH(3) reaction (DeltaHdegrees(298 K)=-32.0 kcal mol(-1)) using different methods of the chemical reaction theory. The ground potential energy surface (PES) is characterized using several ab initio methods. Full-dimensional rate constants have been calculated employing the variational transition state theory and using directly ab initio data. A triatomic analytical representation of the ground PES was derived from ab initio points calculated at the second- and fourth-order M?ller-Plesset levels with the 6-311+G(2df,2pd) basis set, assuming the CH(3) fragment to be a 15 a.m.u. pseudoatom in the fitting process. This is suggested from experiments that indicate that the methyl group is uncoupled to the reaction coordinate. A dynamics study by means of the quasiclassical trajectory (QCT) method and employing this analytical surface was also carried out. The experimental data available on the HF internal states distributions are reproduced by the QCT results. Very recent experimental information about the reaction stereodynamics is also borne out by our QCT calculations. Comparisons with the benchmark F+H(2) and analogous Cl+CH(4) reactions are established throughout.     

Characterization of a new qQq-FTICR mass spectrometer for post-translational modification analysis and top-down tandem mass spectrometry of whole proteins

The use of a new electrospray qQq Fourier transform ion cyclotron mass spectrometer (qQq-FTICR MS) instrument for biologic applications is described. This qQq-FTICR mass spectrometer was designed for the study of post-translationally modified proteins and for top-down analysis of biologically relevant protein samples. The utility of the instrument for the analysis of phosphorylation, a common and important post-translational modification, was investigated. Phosphorylation was chosen as an example because it is ubiquitous and challenging to analyze. In addition, the use of the instrument for top-down sequencing of proteins was explored since this instrument offers particular advantages to this approach. Top-down sequencing was performed on different proteins, including commercially available proteins and biologically derived samples such as the human E2 ubiquitin conjugating enzyme, UbCH10. A good sequence tag was obtained for the human UbCH10, allowing the unambiguous identification of the protein. The instrument was built with a commercially produced front end: a focusing rf-only quadrupole (Q0), followed by a resolving quadrupole (Q1), and a LINAC quadrupole collision cell (Q2), in combination with an FTICR mass analyzer. It has utility in the analysis of samples found in substoichiometric concentrations, as ions can be isolated in the mass resolving Q1 and accumulated in Q2 before analysis in the ICR cell. The speed and efficacy of the Q2 cooling and fragmentation was demonstrated on an LCMS-compatible time scale, and detection limits for phosphopeptides in the 10 amol/muL range (pM) were demonstrated. The instrument was designed to make several fragmentation methods available, including nozzle-skimmer fragmentation, Q2 collisionally activated dissociation (Q2 CAD), multipole storage assisted dissociation (MSAD), electron capture dissociation (ECD), infrared multiphoton induced dissociation (IRMPD), and sustained off resonance irradiation (SORI) CAD, thus allowing a variety of MS(n) experiments. A particularly useful aspect of the system was the use of Q1 to isolate ions from complex mixtures with narrow windows of isolation less than 1 m/z. These features enable top-down protein analysis experiments as well structural characterization of minor components of complex mixtures.     

Synthesis and characterisation of the platinum complexes [PtCl(CClPAr)(PPh3)2] and [PtCl(CClPAr′)(PPh3)2] as potential intermediates in the preparation of phosphaalkynes

Oxidative addition reactions of Cl₂CPR (R = 2,4,6-tris(trifluoromethyl)phenyl (Ar) or 2,6-bis(trifluoromethyl)phenyl (Ar′) with Pt(PPh₃)₄ yield the cis and trans (at platinum) complexes [PtCl(ClCPAr)(PPh₃)₂] and [PtCl(ClCPAr′)(PPh₃)₂]. All starting materials and intermediates have been characterised by NMR spectroscopy. The crystal and molecular structures of the trans-platinum complexes have been determined by single-crystal X-ray diffraction at low temperature.     

Imidazopyridine and pyrimidinopyridine systems from perfluorinated pyridine derivatives

Annelation of pentafluoropyridine via an intramolecular nucleophilic aromatic substitution process with benzamidine gave an imidazopyridine system in high yield in a two step process whilst alkyl amidines gave 4-aminotetrafluoropyridine by a competing elimination reaction. 4-Phenylsulfonyl tetrafluoropyridine reacts with amidines to give the corresponding imidazo[4,5-b]pyridine systems. In contrast, 4-cyanotetrafluoropyridine gave a [6,6]-fused pyrimidinopyridine system arising from initial nucleophilic substitution at the C-3 position of the pyridine ring followed by intramolecular cyclization onto the pendant cyano group. The systems prepared by this annelation methodology further demonstrate the utility of perfluorinated heterocyclic substrates for the synthesis of heterocyclic scaffolds that possess multiple functionality and have potential applications in the drug discovery arena.     

Synthesis and antimalarial effects of N,N-dialkyl-6-(substituted phenyl)-1,2,4,5-tetrazin-3-amines

The synthesis of a series of N,N-dialkyl-6-(substituted phenyl)-1,2,4,5-tetrazin-3-amines (IV) by two routes is described. The first route (Scheme I) involved the oxidative cyclization of formazans (II) to 3-bromo-6-(substituted phenyl)-1,2,4,5-tetrazines (III), followed by treatment with amines. The second (Scheme II) utilized the treatment of 3-(methylthio)-6-(substituted phenyl)-1,2,4,5-tetrazines (VII) with amines to provide the desired products. The intermediate 3-(methylthio)-6-(substituted phenyl)-1,2,4,5-tetrazines (VII) were obtained by thiobenzoylation of hydrazinecarbohydrazonothioic acid methyl ester with [[(substituted phenyl)thioxomethyl]thio]-acetic acids (V) to afford the 1,2-dihydro-3-(methylthio)-6-(substituted phenyl)-1,2,4,5-tetrazines (VI). Oxidation with bromine in acetic acid provided the desired intermediates. The target 6-(substituted phenyl)-1,2,4,5-tetrazin-3-amines (IV) displayed modest antimalarial activity.     

BOLD--a biological O-linked glycan database

Glycans can be O-linked to proteins via the hydroxyl group of serine, threonine, tyrosine, hydroxylysine or hydroxyproline. Sometimes the glycan is O-linked to the hydroxyl group via a phosphodiester bond. The core monosaccharide residue may be N-acetylgalactosamine, N-acetylglucosamine, galactose, glucose, fucose, mannose, xylose or arabinose. These O-linked glycans can remain as a monosaccharide, but often a complex structure is built up by stepwise addition of monosaccharides. Monosaccharides known to be added include galactose, N-acetylglucosamine, fucose, N-acetylneuraminic acid, N-glycolylneuraminic acid and 2-keto-3-deoxynonulosonic acid. O-linked glycans can also contain sulfate and phosphate residues. This leads to the possibility of the existence of numerous O-glycan structures. The biological O-linked database (BOLD) is a relational database that contains information on O-linked glycan structures, their biological sources (with a link to the SWISS-PROT protein database), the references in which the glycan was described (with a link to MEDLINE), and the methods used to determine the glycan structure. The database provides a valuable resource for glycobiology researchers interested in O-linked oligosaccharide structures that have been previously described on proteins from different species and tissues.