Nonlinear optical parameters and optical limitation in cobalt-doped polyvinylpyrrolidone solutions

Nonlinear optical parameters (nonlinear refractive indices and nonlinear absorption coefficients) of solutions of polyvinylpyrrolidone doped by cobalt to various concentrations are measured at the lasing and second-harmonic wavelengths of a picosecond Nd:YAG laser (λ=1064 and 532 nm, respectively, and τ=35 ps). Data on optical limitation in these solutions are presented. The absence of nonlinear absorption in the IR spectral range and its significant effect in the visible range are demonstrated. Optical limitation at a wavelength of 1064 nm is related to defocusing, whereas at 532 nm, this effect is caused by two-photon absorption and partially by inverse saturated absorption and defocusing. Nonlinear optical parameters of metal-polymer complexes are reported.     

Application of pressure sensitive paint measurement to a low-solidity cascade diffuser of a transonic centrifugal compressor

A pressure sensitive paint (PSP) measurement has been known as a pressure field measurement technique based on the oxygen quenching phenomenon of luminescence of specific luminophores. A PSP measurement was applied for pressure field measurement in a low-solidity circular cascade diffuser of a single-stage transonic centrifugal compressor with 5 in pressure ratio for HFC134a gas. The oxygen concentration was about 500 ppm. Ru (bath-phen) was adsorbed on a silica-gel thinlayer chromatography sheet, and the sheet was pasted onto the side-wall between the cascade vanes. A drastic change in luminescent intensity was recognized during a surge condition. Also the pressure variations based on luminescent intensity agreed well with the pressure fluctuations measured using a semiconductor pressure sensor with high-frequency-response. It was shown that a PSP measurement worked well to investigate the unsteady pressure fields in a circular cascade diffuser of a transonic centrifugal compressor. Moreover, the time response of PSP becomes clear as a problem to be overcome for the present.     

Momentum transport and torque scaling in Taylor-Couette flow from an analogy with turbulent convection

We generalize an analogy between rotating and stratified shear flows. This analogy is summarized in Table 1. We use this analogy in the unstable case (centrifugally unstable flow vs. convection) to compute the torque in Taylor-Couette configuration, as a function of the Reynolds number. At low Reynolds numbers, when most of the dissipation comes from the mean flow, we predict that the non-dimensional torque G = T/ν² L, where L is the cylinder length, scales with Reynolds number R and gap width η, G = 1.46η^3/2(1 - η)^-7/4 R ^3/2. At larger Reynolds number, velocity fluctuations become non-negligible in the dissipation. In these regimes, there is no exact power law dependence the torque versus Reynolds. Instead, we obtain logarithmic corrections to the classical ultra-hard (exponent 2) regimes: G = 0.50 . These predictions are found to be in excellent agreement with avail-able experimental data. Predictions for scaling of velocity fluctuations are also provided. Received 7 June 2001 and Received in final form 7 December 2001     

Effect of gamma irradiation on photoconversion characteristics of metal/gallium arsenide barrier structures with textured interface

The effect of ⁶⁰Co gamma irradiation at doses of 10³-2×10⁵ Gy on the photoconversion and dark I-V characteristics of Au/GaAs surface-barrier solar cells (SCs) is studied. The morphology of the interface microrelief is varied to reach the highest photoconversion efficiency. Of the two types of microrelief morphology (dendritic and quasi-grating) obtained by the chemical anisotropic etching of n-(100)GaAs, the latter is more promising, particularly for SCs designed for space application, since the associated SCs offer higher efficiency and radiation resistance.     

Franck-Condon factors and relative strengths of the c1Σu → α1Δg,c1Σu → X3Σg electronic transitions in the O2 molecule

Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 54, No. 1, pp. 46–50, January, 1991.     

The frequency scale of speech intonation.

In intonation research, prominence-lending pitch movements have either been described on a linear or on a logarithmic frequency scale. An experiment has been carried out to check whether pitch movements in speech intonation are perceived on one of these two scales or on a psychoacoustic scale representing the frequency selectivity of the auditory system. This last scale is intermediary between the other two scales. Subjects matched the excursion size of prominence-lending pitch movements in utterances resynthesized in different pitch registers. Their task was to adjust the excursion size in a comparison stimulus in such a way that it lent equal prominence to the corresponding syllable in a fixed test stimulus. The comparison stimulus and the test stimulus had pitches running parallel on either the logarithmic frequency scale, the psychoacoustic scale, or the linear frequency scale. In one-half of the experimental sessions, the test stimulus was presented in the low register, while the comparison stimulus was presented in the high register, and, conversely, for the other half of the sessions. The result is that, in all cases, stimuli are matched in such a way that the average excursion sizes in different registers are equal on the psychoacoustic scale.     

Molecular dynamics simulation of processing using AFM pin tool

A three-dimensional molecular dynamics (MD) model is utilized to investigate the effect of tool geometry on the deformation process of the workpiece and the nature of deformation process at the atomic-scale. Results show that different states exist between the atomic force microscope (AFM) pin tool and the workpiece surface, i.e. the non-wear state, the ploughing state, the state in which ploughing is dominant and the state in which cutting plays a key role. A relationship between the deformation process of the workpiece and the potential energy variation is presented. The potential energy variation of atoms in different deformed regions in the workpiece such as plastically deformed region, elastically deformed region and the mixed deformation region is different. The features of variations of potential energy are discussed.     

Three Electrons in a Two-Dimensional Parabolic Trap: The Relative Motion Solution

In agreement with the Kohn theorem the relative motion (rel) of three electrons in a two-dimensional parabolic trap separates from the centre-of-mass (CM) motion. By introducing new coordinates the Hamiltonian for relative motion in the approximation of non-interacting electrons can be taken to the normal form. The eigenstates of the normalized Hamiltonian are products of the Fock-Darwin states for normal modes. The energy levels for relative motion are obtained by diagonalizing the exact Hamiltonian in the eigenbasis for the non-interacting case. In this basis the interaction matrix elements can be obtained in the analytical form. Since the rank of the Hamiltonian matrix is significantly reduced, the calculations are faster and more accurate than those for the full (CM + rel) motion. This advantage is especially important for the calculations of excited states and the analysis of energy spectra.     

Enantiodiscrimination of racemic electrophiles by diketopiperazine enolates: asymmetric synthesis of methyl 2-amino-3-aryl-butanoates and 3-methyl-aspartates

Enolates of (S)-N,N′-bis-(p-methoxybenzyl)-3-iso-propylpiperazine-2,5-dione exhibit high levels of enantiodiscrimination in alkylations with (RS)-1-aryl-1-bromoethanes and (RS)-2-bromoesters, affording substituted diketopiperazines containing two new stereogenic centres in high de. Deprotection and hydrolysis of the resultant substituted diketopiperazines provides a route to the asymmetric synthesis of homochiral methyl 2-amino-3-aryl-butanoates and 3-methyl-aspartates in high de and ee.