Gasification characteristics of woody biomass in the packed bed reactor

Gasification technology is recognized as one of the possibilities for utilizing biomass effectively. This study focused on woody biomass gasification fundamentals, using a bench-scale packed-bed reactor. In this experiment, pellets of black pine were gasified, using air as the oxidizing agent. Gasification tests were carried out under both updraft and downdraft conditions. Temperature distributions and compositions of syngas inside the gasifier were continuously monitored during gasification experiments at several ports on the wall of the reactor. The syngas at the exit of the gasifier was also sampled to estimate the amount of tar. Lower heating values of the syngas under updraft and downdraft conditions were 4.8 and 3.8 MJ/m³N, respectively. It was easier to control the height of the packed bed under the downdraft condition than under the updraft condition. Under the updraft condition, a bridging phenomenon occurred. Tar generation under the downdraft condition was lower than that under the updraft condition. This is because tar passes through a partial combustion zone or higher temperature zone in the downdraft gasifier.     

Free standing modulation doped core–shell GaAs/AlGaAs hetero‐nanowires

Modulation doped AlGaAs/GaAs core–shell nanowire structures were grown by molecular beam epitaxy. A Si delta‐doping was introduced in the AlGaAs shell around the {110} facets of the GaAs core. The wires are typically highly resistive at low temperatures. However, they show a pronounced persistent photoconductivity effect indicating activation of free carriers from the delta‐doped shell to the GaAs core. The n‐type character of the channel is demonstrated by applying a back‐gate voltage. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Mechanical characteristics and morphological effect of complex crossed structure in biomaterials: fracture mechanics and microstructure of chalky layer in oyster shell

The complex crossed structures with a polymorph of calcite, termed a chalky layer, which make up much of the shell of an oyster, are composed of flames and leaflets. Two layers, folia and the chalky layer in the giant Pacific oyster (Crassostrea gigas) were examined using SEM (scanning electron microscope), micro-area-XRD (X-ray diffraction) and FT-IR (Fourier transform infrared spectrometer) to determine their morphologies and component characteristics. The chalky layer was also tested using microindentation to assess its mechanical properties, and a microcrack was generated to study the fracture mechanism of the chalky layer. From an analysis of the secondary protein structure, it was shown that the ordered structures of the two layers, α-helix and β-structure, are similar but that the unordered structures are different. Moreover, the foliated rods at the interface of the chalky layer play a key role in the crystal growth of the chalky layers. Comparing the morphology and the preferred orientation of foliated laths, the advantages of the relatively high density and low hardness of the chalky layer have interesting implications regarding the development of sophisticated complex composites.     

Plasmonic rainbow trapping structures for light localization and spectrum splitting

"Rainbow trapping" has been proposed as a scheme for localized storage of broadband electromagnetic radiation in metamaterials and plasmonic heterostructures. Here, we articulate the dispersion and power flow characteristics of rainbow trapping structures, and show that tapered waveguide structures composed of dielectric core and metal cladding are best suited for light trapping. A metal-insulator-metal taper acts as a cascade of optical cavities with different resonant frequencies, exhibiting a large quality factor and small effective volume comparable to conventional plasmonic resonators.     

High-speed CH planar laser-induced fluorescence imaging using a multimode-pumped optical parametric oscillator

We report on high-speed CH planar laser-induced fluorescence (PLIF) imaging in turbulent diffusion flames using a multimode-pumped optical parametric oscillator (OPO). The OPO is pumped by the third-harmonic output of a multimode Nd:YAG cluster for direct signal excitation in the A-X (0,0) band of the CH radical. The lasing threshold, conversion efficiency, and linewidth are shown to depend on the number of pump passes in the ring cavity of the OPO. Single-shot CH PLIF images are acquired at 10 kHz with excitation energy up to 6 mJ/pulse at 431.1 nm. Signal-to-noise ratios of ~25-35 are the highest yet reported for high-speed CH PLIF.     

Studies on nano suspensions of silver sol and redispersed nanocrystallite silver in aqueous and alcoholic media

Nanocrystallite silver and silver sol were prepared and characterized by UV-visible spectra, XRD, TEM and HRTEM. The crystallite silver is re-dispersed in two different media, namely, water and alcohol and sonicated before ultrasonic investigation. The silver sol was used as such. Three different models for the propagation of ultrasound through two phase media are compared in these three different types of nano suspensions. Effect of particle size and medium on ultrasonic velocity (U), compressibility (κ) impedance (Z) and viscous relaxation time (τ) is studied. The particle concentration range was 0.2-1 v/v. Density and viscosity of the dispersion and sol are measured at different particle volume fractions. Effective density and ultrasonic velocity are computed by Urick, Kuster and Toksöz and Urick and Ament models and compared with experimental velocities. Values of effective density obtained by using Urick and Urick and Ament equations closely agree with experimental results of density while Urick's equation prediction of velocity is in close agreement with the experimental velocities. This comes as a surprise in view of the large density difference between the medium and suspended particle and suggests the possibility of the balancing effect of the inertial and viscous forces operating in the suspension.     

Effects of post-annealing on the structural and nanomechanical properties of Ga-doped ZnO thin films deposited on glass substrate by rf-magnetron sputtering

In this study, the effects of post-annealing on the structure, surface morphology and nanomechanical properties of ZnO thin films doped with a nominal concentration of 3 at.% Ga (ZnO:Ga) are investigated using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM) and nanoindentation techniques. The ZnO:Ga thin films were deposited on the glass substrates at room temperature by radio frequency magnetron sputtering. Results revealed that the as-deposited ZnO:Ga thin films were polycrystalline albeit the low deposition temperature. Post-annealing carried out at 300, 400 and 500 °C, respectively, has resulted in progressive increase in both the average grain size and the surface roughness of the ZnO:Ga thin film, in addition to the improved thin films crystallinity. Moreover, the hardness and Young's modulus of ZnO:Ga thin films are measured by a Berkovich nanoindenter operated with the continuous contact stiffness measurements (CSM) option. The hardness and Young's modulus of ZnO:Ga thin films increased as the annealing temperature increased from 300 to 500 °C, with the best results being obtained at 500 °C.     

Surface characteristics and in vitro biocompatibility of a manganese-containing titanium oxide surface

This study investigated the surface characteristics and in vitro biocompatibility of a titanium (Ti) oxide layer incorporating the manganese ions (Mn) obtained by hydrothermal treatment with the expectation of utilizing potent integrin-ligand binding enhancement effect of Mn for future applications as an endosseous implant surface. The surface characteristics were evaluated by scanning electron microscopy, thin-film X-ray diffractometry, X-ray photoelectron spectroscopy, optical profilometry and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The in vitro biocompatibility of the Mn-containing Ti oxide surface was evaluated in comparison with untreated bare Ti using a mouse calvaria-derived osteoblastic cell line (MC3T3-E1). The hydrothermal treatment produced a nanostructured Mn-incorporated Ti oxide layer approximately 0.6 μm thick. ICP-AES analysis demonstrated that the Mn ions were released from the hydrothermally treated surface into the solution. Mn incorporation notably decreased cellular attachment, spreading, proliferation, alkaline phosphatase activity, and osteoblast phenotype gene expression compared with the bare Ti surface (p < 0.05). The results indicate that the Mn-incorporation into the surface Ti oxide layer has no evident beneficial effects on osteoblastic cell function, but instead, actually impaired cell behavior.     

On the complexity of project scheduling to minimize exposed time

We consider project scheduling where the project manager’s objective is to minimize the time from when an adversary discovers the project until the completion of the project. We analyze the complexity of the problem identifying both polynomially solvable and NP-hard versions of the problem. The complexity of the problem is seen to be dependent on the nature of renewable resource constraints, precedence constraints, and the ability to crash activities in the project.