Total Synthesis of (+/-)-Deethylibophyllidine: Studies of a Fischer Indolization Route and a Successful Approach via a Pummerer Rearrangement/Thionium Ion-Mediated Indole Cyclization

The total synthesis of (+/-)-deethylibophyllidine is described, proceeding in eight steps from 4-(methoxyphenyl)ethylamine in 5% overall yield (Scheme 6). In terms of sequential annulation, the strategy involves the following operations: E --> DE --> ABDE --> ABCDE (Scheme 1). The key steps in the synthesis are the stereoselective formation of octahydroindol-6-ones by acid treatment of dihydroanisole derivatives, the regioselective Fischer indolization to obtain octahydropyrrolo[3,2-c]carbazoles, and the tandem process consisting of Pummerer rearrangement upon a beta-amino sulfoxide and thionium ion cyclization upon a beta-indole position of a 2,3-disubstituted indole to generate the quaternary spiro center. Attempts to effect the construction of the pentacyclic framework by means of Fischer indolization of the octahydropyrrolo[3,2,1-hi]indol-6-one resulted in failure (Scheme 2).     

How to avoid the cheaters succeeding in the key sharing scheme

In this paper the Rational Interpolation is presented as a solution to the problem caused by a cheater using the Threshold Scheme. We will implement this scheme by using the Berlekamp-Massey algorithm.The first version we present does not try to detect the cheaters, as in [3], [9] or [10]. This version tries to prevent their knowledge of the correct keyD while the other participants are aware only of the false keyD computed in the threshold scheme.The second version we present is to detect the existence of cheaters.This work was partially supported by Spanish CICYT Grant TIC91-0472.     

Analysis of sterol oxidation products in foods

The main aspects related to the analysis of sterol oxidation products (SOP) in foods are comprehensively reviewed. Special emphasis is placed on the critical and controversial points of this analysis because these points affect crucial analytical parameters such as precision, accuracy, selectivity, and sensitivity. The effect of sample preparation and the conditions of quantification by gas chromatography and liquid chromatography on these parameters are also reviewed. The results show that, in order to choose an adequate method to analyze SOP in a certain food, the analyst must consider its SOP concentration and matrix complexity. The term SOP includes both cholesterol oxidation products (COP) and phytosterol oxidation products (POP). The state of the art of COP and POP analysis is quite different; many more studies have dealt with the analysis of COP than of POP. However, most of the results presented here about COP analysis may be extrapolated to POP analysis because both groups of compounds show similar structures and characteristics.     

Analysis of polyaddition levels in i-Sc3NC80

Using the density functional method, the stabilities of highly hydrogenated and fluorinated [80]fullerenes, both empty and containing the Sc3N molecule, have been calculated. Addition of 44 atoms to i-Sc3NC80 is predicted to be most favorable due to the formation of six octahedrally located benzenoid rings, while addition of up to 52 atoms (consistent with preliminary fluorination data) gives a structure stabilized by the presence of four benzenoid rings. The most stable isomers at this addition level have been determined and the relative stabilities of a number of C80H52, C80F52, and i-Sc3NC80H52 species calculated. The hydrogenation of the i-Sc3NC80 has been computed to be more difficult than the corresponding partner, C80. From the geometrical point of view, the Sc3N molecule is planar in the parent [80]fullerene but is calculated to be pyramidal in some of the hydrogenated/fluorinated derivatives. Moreover, in these it has fixed locations due to orbital interactions arising from deformation of the cage and the presence of localized double bonds.     

Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).     

Therapeutic monitoring of imipramine and desipramine by micellar liquid chromatography with direct injection and electrochemical detection

A micellar liquid chromatographic (MLC) procedure was developed for the clinical monitoring of imipramine and its active metabolite, desipramine. The determination of these highly hydrophobic substances was carried out after direct injection of the serum samples using a mobile phase composed of 0.15 m SDS--6% (v/v) pentanol buffered at pH 7, pumped at 1.5 mL/min into a C(18) column (250 x 4.6 mm), and electrochemical detection at 650 mV. Using this MLC method, calibration was linear (r > 0.995) and the limits of detection (ng/mL) were 0.34 and 0.24 for imipramine and desipramine, respectively. Repeatabilities and intermediate precision were tested at three different concentrations in the calibration range and a CV (%) below 2.2 was obtained. In this MLC procedure, the serum is determined without treatment, thus allowing repeated serial injections without changes in retention factors, and reducing the time and consumables required to carry out the pretreatment process. The assay method can be applied to the routine determination of serum imipramine and its metabolite in therapeutic drug monitoring.     

Interaction of antimicrobial arginine-based cationic surfactants with liposomes and lipid monolayers

The present work examines the relationship between the antimicrobial activity of novel arginine-based cationic surfactants and the physicochemical process involved in the perturbation of the cell membrane. To this end, the interaction of these surfactants with two biomembrane models, namely, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) multilamellar lipid vesicles (MLVs) and monolayers of DPPC, 1,2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] sodium salt (DPPG), and Escherichia coli total lipid extract, was investigated. For the sake of comparison, this study included two commercial antimicrobial agents, hexadecyltrimethylammonium bromide and chlorhexidine dihydrochloride. Changes in the thermotropic phase transition parameters of DPPC MLVs in the presence of the compounds were studied by differential scanning calorimetry analysis. The results show that variations in both the transition temperature (Tm) and the transition width at half-height of the heat absorption peak (deltaT1/2) were consistent with the antimicrobial activity of the compounds. Penetration kinetics and compression isotherm studies performed with DPPC, DPPG, and E. coli total lipid extract monolayers indicated that both steric hindrance effects and electrostatic forces explained the antimicrobial agent-lipid interaction. Overall, in DPPC monolayers single-chain surfactants had the highest penetration capacity, whereas gemini surfactants were the most active in DPPG systems. The compression isotherms showed an expansion of the monolayers compared with that of pure lipids, indicating an insertion of the compounds into the lipid molecules. Owing to their cationic character, they are incorporated better into the negatively charged DPPG than into zwitterionic DPPC lipid monolayers.     

On the automatic restricted-step rational-function-optimization method

The rational function optimization algorithm is one of the widely used methods to search stationary points on surfaces. However, one of the drawbacks of this method is the step reduction procedure to deal with the overstepping problem. We present and comment on a method such that the step obtained from the solution of the rational function equations possesses the desired correct length. The analysis and discussion of the method is mainly centered on the location and optimization of transition states. Received: 18 June 1998 / Accepted: 17 September 1998 / Published online: 23 November 1998     

Energy decomposition in molecular complexes: implications for the treatment of polarization in molecular simulations

This study examines the contribution of electrostatic and polarization to the interaction energy in a variety of molecular complexes. The results obtained from the Kitaura-Morokuma (KM) energy decomposition analysis at the HF/6-31G(d) level indicate that, for intermolecular distances around the equilibrium geometries, the polarization energy can be determined as the addition of the polarization energies of interacting blocks, as the mixed polarization term is typically negligible. Comparison of KM and QM/MM results shows that the electrostatic energy determined in the KM method is underestimated (in absolute value) by QM/MM methods. The reason of such underestimation can be attributed to the simplified representation of treating the interaction between overlapping charge distribution by the interaction of a QM molecule with a set of point charges. Nevertheless, the polarization energies calculated by KM and QM/MM methods are in close agreement. Finally, a consistent, automated strategy to derive charge distributions that include implicitly polarization effects in pairwise, additive force fields is presented. The strategy relies in the simultaneous fitting of electrostatic and polarization energies computed by placing a suitable perturbing particle at selected points around the molecule. The suitability of these charges to describe molecular interactions is discussed.