Approximate transferability in alkanenitriles

The atomic and bond properties of a series of alkanenitriles were calculated in order to analyze the transferability of the CN, methyl, and methylene groups. The calculations were carried out using the atoms in molecules (AIM) theory on RHF/6‐31++G**// RHF/6‐31G** wave functions obtained for compounds CN–R (R ranging from H to C₁₁H₂₃). Linear correlations between L(Ω) and N(Ω) were used to establish N(CH₂) and N(CH₃) nearly transferable values. Average values and maximum differences to the mean value of several properties were used for classifying the CN group. It shows a transferable behavior along the CN–R series for R>Et. The methyl group presents specific properties when R<Pr. The methylene groups can be classified considering both their position with respect to the end of the chain and the position with respect to the CN group. The atomic energy displays a dependence on the molecular size. Although this behavior does not allow to consider this property as transferable, both the ab initio total electronic molecular energies and the experimental heats of formation can be fitted, by linear regression analysis, as a function of the number of methylene groups. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Thermodynamic properties of quinoxaline-1,4-dioxide derivatives: a combined experimental and computational study

The mean (N-O) bond dissociation enthalpies were derived for three 2-methyl-3-(R)-quinoxaline 1,4-dioxide (1) derivatives, with R = methyl (1a), ethoxycarbonyl (1b), and benzyl (1c). The standard molar enthalpies of formation in the gaseous state at T = 298.15 K for the three 1 derivatives were determined from the enthalpies of combustion of the crystalline solids and their enthalpies of sublimation. In parallel, accurate density functional theory-based calculations were carried out in order to estimate the gas-phase enthalpies of formation for the corresponding quinoxaline derivatives. Also, theoretical calculations were used to obtain the first and second N-O dissociation enthalpies. These dissociation enthalpies are in excellent agreement with the experimental results herewith reported.     

Orbital-band interactions and the reactivity of molecules on oxide surfaces: from explanations to predictions

 The surface chemistry of oxides is relevant for many technological applications: catalysis, photoelectrolysis, electronic-device fabrication, prevention of corrosion, sensor development, etc. This article reviews recent theoretical works that deal with the surface chemistry of oxides. The account begins with a discussion of results for the adsorption of CO and NO on oxides, systems which have been extensively studied in the literature and constitute an ideal benchmark for testing the quality of different levels of theory. Then, systematic studies concerned with the behavior of adsorbied alkali metals and sulfur-containing molecules are presented. Finally, a correlation between the electronic and chemical properties of mixed-metal oxides is analyzed and basic principles for designing chemically active oxides are introduced. Advances in theoretical methods and computer capabilities have made possible a fundamental understanding of many phenomena associated with the chemistry of molecules on oxide surfaces. Still many problems in this area remain as a challenge, and the approximate nature of most theoretical methods makes necessary a close coupling between theory and experiment. Following this multidisciplinary approach, the importance of band-orbital interactions for the reactivity of oxide surfaces has become clear. Simple models based on band-orbital mixing can explain trends found for the interaction of many adsorbates with oxide surfaces. These simple models provide a conceptual framework for modifying or controlling the chemical activity of pure oxides and for engineering mixed-metal oxides. In this respect, theoretical calculations can be very useful for predicting the best ways for enhancing the reactivity of oxide systems and reducing the waste of time, energy and materials characteristic of an empirical design. Received: 21 June 2001 / Accepted: 8 October 2001 / Published online: 1 February 2002     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.     

On the accuracy of correlation energy calculated by the correlation factor method: first- and second-row atoms

Summary The correlation energy of two- and four-isoelectronic series, a representative example for which the existing spin-density functionals fails, is calculated using the Colle and Salvetti method, considering mono- and multideterminantal wave functions. The results are in agreement with experimental data, and show the potentiality of this method when it is applied to wave functions including the most relevant configurational features. Also, results for the ionization energies and electron affinities of first- and second-row atoms are reported.     

Mass spectrometric study to characterize thioisoindole derivatives of aminoglycoside antibiotics

Aminoglycoside antibiotics are widely used to treat serious Gram-negative and Gram-positive bacterial infections. The lack of a UV chromophore presents a problem in the analysis of aminoglycosides. Derivatization with 1,2-phthalic dicarboxaldehyde (OPA) in the presence of a thiol made it possible to introduce a UV chromophoric thioisoindole moiety. A qualitative mass spectrometry study was carried out to confirm the molecular identity of the products formed. The conditions described earlier to derivatize gentamicin and kanamycin yielded products in which all primary amino groups are fully derivatized. On the other hand, with tobramycin and amikacin, there was also formation of incompletely derivatized products that contained one thioisoindole group less than the fully derivatized product. This study has therefore brought an additional insight into the nature of the OPA-aminoglycoside derivatives studied.     

Quantitative analysis of the farnesyl transferase inhibitor lonafarnib (Sarasartrade mark, SCH66336) in human plasma using high-performance liquid chromatography coupled with tandem mass spectrometry

Lonafarnib is a novel anticancer drug that inhibits farnesyl transferase. To assess its pharmacokinetic properties, we developed a sensitive and quantitative assay using liquid chromatography coupled with tandem mass spectrometry for the determination of lonafarnib levels in human plasma. Sample pretreatment consisted of the addition of an isotopically labeled internal standard and protein precipitation with acetonitrile using 100 microL plasma. Chromatographic separation was performed on an Inertsil ODS-3 analytical column (50 x 2.1 mm i.d., particle size 5 microm) with acetonitrile/water/formic acid (50:50:0.05, v/v/v) as the mobile phase, at a flow rate of 0.2 mL/min. The analytical run time was 8 min. An API365 triple quadrupole mass spectrometer was used for specific and sensitive detection. It was operated in the positive ion mode and multiple reaction monitoring was used for drug quantification. The method was validated using a concentration range of 2.5 to 2500 ng/mL lonafarnib. Validation of the assay was performed according to the most recent FDA guidelines for bioanalytical method validation and all results were within the requirements. The described method was successfully applied to support a clinical phase I trial with lonafarnib.     

Selective crystallization of calcium salts by poly(acrylate)-grafted chitosan

The biopolymer chitosan was chemically modified by grafting polyacrylamide or polyacrylic acid in a homogeneous aqueous phase using potassium persulfate (KPS) as redox initiator system in the presence of N,N-methylene-bis-acrylamide as a crosslinking agent. The influence of the grafted chitosan on calcium salts crystallization in vitro was studied using the sitting-drop method. By using polyacrylamide grafted chitosan as substrate, rosette-like CaSO4 crystals were observed. This was originated by the presence of sulfate coming from the initiator KPS. By comparing crystallization on pure chitosan and on grafted chitosan, a dramatic influence of the grafted polymer on the crystalline habit of both salts was observed. Substrates prepared by combining sulfate with chitosan or sulfate with polyacrylamide did not produce similar CaSO4 morphologies. Moreover, small spheres or donut-shaped CaCO3 crystals on polyacrylic acid grafted chitosan were generated. The particular morphology of CaCO3 crystals depends also on other synthetic parameters such as the molecular weight of the chitosan sample and the KPS concentration.     

A pyrimidine thiolate Rh(I) complex: structure, bonding and one-dimensional interactions in solid and in solution

The reaction of [Rh(micro-Cl)(COD)]2 with 4,6-dimethyl-pyrimidinethiolate (Me2-pymt) and subsequent substitution of COD by CO yields [Rh(Me2-pymt)(CO)2]. The stacking pattern found in this compound is in contradiction with previously studied comparable square-planar complexes of type d8-[M(chelate)(monodentate)2] in which each ligand has different pi-acidic character. A theoretical study of the intermolecular interactions and conformation of the title compound has been carried out, combining semi-empirical band calculations on the real chains and ab initio(MP2 level) calculations on a model dimer. The combination of electronic and steric effects determines the rotation of the successive monomers and the deviation from linearity of the one-dimensional stacks. Its behaviour in solution is also special, developing a blue colour and forming micelles, when adding water to acetone solutions.     

Strongly isolated ferromagnetic layers in poly-trans-mu-dichloro- and poly-trans-mu-dibromobis(1-(2-chloroethyl)-tetrazole-N4)copper(II) complexes

Two new isostructural compounds, dichlorobis(1-(2-chloroethyl)tetrazole)copper(II) (1) and dibromobis(1-(2-chloroethyl)tetrazole)copper(II) (2), have been prepared. The synthesis, characterization, and spectral and magnetic properties as well as the crystal and molecular structures of 1 and 2 have been studied. Both complexes form two-dimensional, distorted square grid planes of copper and halides, distinctly separated by layers of tetrazole ligands. The differential (ac) magnetic susceptibility, chi = (deltaM/deltaH)(T), and magnetization M(H) of both complexes have been studied as a function of temperature and field. The compounds possess a ferromagnetic interaction within the isolated copper-halide layers (J/k(B) = 8.0 K, J/k(B) = 10.2 K, respectively, for the chloride and the bromide, and T(c) = 4.75 K, T(c) = 8.01 K). The magnetic coupling J'/k(B) between the different layers is found to be very weak (|J'/J| 相似文献