Revealing structural effects: electrochemical reactions of butanols on platinum

Spectroelectrochemical studies on the reactivity of butanol isomers on Pt electrodes in perchloric acid medium led to the observation of structural effects that result from the different arrangements of atoms in the organic molecules. The use of differential electrochemical mass spectrometry (DEMS) to detect volatile products showed that all four isomers react on the electrode, though different product yields were observed for each compound. In spite of the differences in the electrochemical behaviour of the butanol isomers, a series of general processes accounts for the results obtained. The formation of strongly adsorbed residues by a dehydration process leading to the formation of a C=C bond was proposed for all isomers. Electroreduction of the adsorbates produces C(4) and C(3) alkanes, and the latter reveal the existence of a fragmentation process. The C(4) hydrocarbons can be formed by hydrogenation of these residues and by hydrogenolysis of alcohol molecules in the bulk solution which react at the electrode with adsorbed hydrogen. On the other hand, CO(2) is formed during electrooxidation of the adsorbed species. Partial-oxidation products containing a carbonyl group were detected from 0.2 M solutions of 1-butanol, isobutyl alcohol and sec-butyl alcohol. The tertiary alcohol tert-butyl alcohol only reacts in its adsorbed state.     

Screening and analytical confirmation of sulfonamide residues in milk by capillary electrophoresis-mass spectrometry

A new methodology is proposed to automate the monitoring of sulfonamide residues in milk samples. It combines a screening unit for the total amount of sulfonamide with capillary electrophoresis-mass spectrometry (CE-MS) equipment for processing the samples containing a detectable level of sulfonamide. The screening unit consists of continuous-flow system (CFS) to precipitate the proteins connected on-line to the CE-MS equipment, in which a common characteristic ion of all sulfonamides was monitored with the MS detector by flushing the sample through the capillary. The confirmatory method is based on the purification and preconcentration of sulfonamides in a CFS unit and posterior analysis by CE-MS. The sample treatment unit was also on-line connected to the CE-MS equipment. In order to increase sensitivity, the flow rate of the sheath liquid was diminished from 0.5 to 0.2 microL.min(-1) by increasing the content in water from 0 to 50% and the formic acid from 0.5 to 1.5% in this liquid and by applying an overimposed pressure of 5 mbar during the electrophoretic separation. The method allowed the analysis of 30 samples per hour.     

Carbon fiber cylindrical microelectrode-based detector for the determination of antithyroid drugs

An amperometric flow-injection method for the determination of antithyroid drugs such as 6-methyl-2-thiouracil (MTU) using a carbon fiber cylindrical microelectrode-based detector is reported. A home-made flow-cell specially adapted for working with cylindrical microelectrodes ranging between 4 and 10 mm in length was used for this purpose. Methanol containing 0.05 mol l(-1) tetrabutylammonium perchlorate as the supporting electrolyte was employed, and a potential of +1.6 V was selected for the amperometric detection of MTU. No cleaning or electrode surface regeneration of the fiber was necessary during the whole working day. A limit of detection of 2.6x10(-7) mol l(-1) (37 mug MTU l(-1)) was achieved. The method was applied to the determination of MTU in spiked feed samples (peas and corn flour), at the 142 mug g(-1) level. The procedure involved the extraction of the drug in methanol, a clean-up step using Florisil cartridges and the use of the standard additions method. Recoveries of 81+/-6 and 85+/-8% were obtained for peas and corn flour, respectively.     

Totally selective ring-opening of amino epoxides with ketones: a general entry to enantiopure (2R,3S)- and (2S,3S)-3-aminoalkano-1,2-diols

[Reaction: see text] Transformation of enantiopure diastereoisomers (2R,1'S)- and (2S,1'S)-2-(1-aminoalkyl)epoxides into the corresponding 4-(1-aminoalkyl)-1,3-dioxolanes is achieved by reaction with different ketones in the presence of BF3.Et2O. The conversion takes place in very high yields, total selectivity, and without epimerization. A mechanism to explain this transformation is proposed. The obtained 1,3-dioxolanes can be deprotected, and (2R,3S)- and (2S,3S)-3-aminoalkano-1,2-diols were isolated.     

Cycloaddition reactions of 5-deutero-1-phenyl-4-vinylpyrazole. Stereoselectivecis “ene” reaction and simplification of NMR spectra of mixtures of cycloadducts

Summary The reaction of methyl propiolate (MP) with 1-phenyl-4-vinylpyrazole deuterated in the five position has clarified the¹H NMR spectrum of the mixture of the adducts 1:2 which are obtained as a result of a Diels-Alder cycloaddition followed by a non-regioselective ene reaction. The deuterated substrate allowed at the same time to establish the stereochemistry of the ene reaction as a concertedcis process.

---

Cycloadditionsreaktionen von 5-Deutero-1-phenyl-4-vinylpyrazol. Stereoselektivecis-en-Reaktion und Vereinfachung von NMR-Spektren von Mischungen der Cycloaddukte (Kurze Mitt.)

Zusammenfassung Die Reaktion von Methylpropiolat (MP) mit an der 5-Stellung deuteriertem 1-Phenyl-4-vinylpyrazol wurde zur vereinfachten Interpretation der¹H-NMR-Spektren einer 1:2 Mischung von Addukten aus der Diels-Alder-Cycloaddition mit nachfolgender nicht-regioselektiver en-Reaktion eingesetzt. Das deuterierte Substrat erlaubte zugleich auch die Bestimmung der Stereochemie der en-Reaktion als einen konzertiertencis-Prozeß.

     

Determination of lead in the urine of exposed and unexposed adults by extraction and flow-injection/atomic absorption spectrometry

Lead is extracted from urine with ammonium pyrrolidien dithiocrbamate into methyl isobutyl ketone, and 20 μl of the extract is injected into a water carrier stream in a flow-injection/atomic absorption system. The procedure is simple, quick, accurate and reproducible. Recoveries are 96–105%. The mean urine lead contents of 20 unexposed and 20 printing-press lead exposed workers was found to be 39.0 ± 8.3 and 71.7 ± 26.3 μg Pb l^?1, respectively.     

Structural characterization of single-walled carbon nanotube bundles by experiment and molecular simulation

A procedure, combining molecular simulation, Raman spectroscopy, and standard nitrogen adsorption, is developed for structural characterization of single-walled carbon nanotube (SWNT) samples. Grand canonical Monte Carlo simulations of nitrogen adsorption are performed on the external and internal adsorption sites of homogeneous arrays of SWNTs of diameters previously determined by Raman spectroscopy of the sample. The results show the importance of the peripheral grooves of a nanotube bundle at low relative pressure and the insensitivity of nanotube diameter toward adsorption on the external surface of the bundle at higher pressures. Simulations also reveal that samples containing thin nanotubes have less internal adsorption capacity that saturates at lower pressure than those comprising large diameter nanotubes. The fraction of open-ended nanotubes in a sample can be estimated by scaling the simulated internal adsorption inside nanotubes to obtain a near perfect fit between simulated and experimental isotherms. This procedure allows extrapolation of adsorption properties to conditions in which all nanotubes in the sample are open-ended.     

Stereochemical analysis of 3,4-methylenedioxymethamphetamine and its main metabolites by gas chromatography/mass spectrometry

3,4-Methylenedioxymethamphetamine (MDMA, ecstasy) is consumed as the racemate but some metabolic steps are enantioselective. In addition, chiral properties are preserved during MDMA biotransformation. A quantitative analytical methodology using gas chromatography/mass spectrometry (GC/MS) to determine enantioselective disposition in the body of MDMA and its main metabolites including 3,4-methylenedioxyamphetamine (MDA), 4-hydroxy-3-methoxymethamphetamine (HMMA), and 4-hydroxy-3-methoxyamphetamine (HMA) was developed. Plasma and urine samples were collected from a male volunteer. The analysis of MDMA, MDA, and 4-hydroxy-3-methoxy metabolites by GC/MS required a two-step derivatization procedure. The first step consisted of derivatization of the amine with enantiomerically pure Mosher's reagent ((R)-MTPCl). Triethylamine was used as a base to neutralize hydrochloric acid formed during the reaction allowing quantitative derivatization, which resulted in a substantial improvement in the sensitivity of the method compared with other previously described techniques. Further treatment with ammonium hydroxide was required since both amine and hydroxyl groups underwent derivatization in the reaction. Ammonium hydroxide breaks bonds formed with hydroxyl groups without affecting amine derivatives. The second derivatization step using hexamethyldisilazane was needed for metabolites containing phenol residues. This derivatization method permitted the stereochemically specific study of MDMA and its main monohydroxylated metabolites by GC/MS. A detailed study of the chemical reactions involved in the derivatization steps was indispensable to develop a straightforward, sensitive, and reproducible method for the analysis of the parent drug compound and its metabolites.     

Synthesis, structure and conformation of partially-modified retro- and retro-inverso psi[NHCH(CF3)]Gly peptides

Partially modified retro- (PMR) and retro-inverso (PMRI) psi[NHCH(CF(3))]Gly peptides, a conceptually new class of peptidomimetics, have been synthesized in wide structural diversity and variable length by aza-Michael reaction of enantiomerically pure alpha-amino esters and peptides with enantiomerically and geometrically pure N-4,4,4-trifluorocrotonoyl-oxazolidin-2-ones. The factors underlying the observed moderate to good diastereocontrol have been investigated. The conformations of model PMR-psi[NHCH(CF(3))]Gly tripeptides have been studied in solution by (1)H NMR spectroscopy supported by MD calculations, as well as in the solid-state by X-ray diffraction. Remarkable stability of turn-like conformations, comparable to that of parent malonyl-based retropeptides, was evidenced, as a likely consequence of two main factors: 1) severe torsional restrictions about sp(3) bonds in the [CO-CH(2)-CH(CF(3))-NH-CH(R)-CO] module, which is biased by the stereoelectronically demanding CF(3) group and the R side chain; 2) formation of nine-membered intramolecularly hydrogen-bonded rings, which have been clearly detected both in CHCl(3) solution and in some crystal structures. The former factor seems to be more important, as turn-like conformations were found in the solid-state even in the absence of intramolecular hydrogen bonding. The relative configuration of the -C*H(CF(3))NHC*H(R)- stereogenic centers has a major effect on the stability of the turn-like conformation, which seems to require a syn stereochemistry. X-ray diffraction and ab initio computational studies showed that the [-CH(CF(3))NH-] group can be seen as a sort of hybrid between a peptide bond mimic and a proteolytic transition state analogue, as it combines some of the properties of a peptidyl -CONH- group (low NH basicity, CH(CF(3))-NH-CH backbone angle close to 120 degrees, C-CF(3) bond substantially isopolar with the C=O) with some others of the tetrahedral intermediate [-C(OX)(O(-))NH-] involved in the protease-mediated hydrolysis reaction of a peptide bond (high electron density on the CF(3) group, tetrahedral backbone carbon).     

Intercalation of Cyclic Amines into α-Titanium Phosphate

The intercalation of some amines (aniline, benzylamine, cyclohexylamine,piperidine, pyridine, pyrazine and piperazine) into -titaniumphosphate, Ti(HPO₄)_2×H₂O,has been investigated by the batch method and/or by exposing the host to thevapour of the amines. The changes in the interlayer distance of the solidduring the intercalation process was followed by X-ray powder diffraction.The new intercalates were characterised by chemical and thermal analysis.Materials with a monolaminar and/or bilaminar arrangement of amine moleculesin the phosphate interlayer region are obtained depending on the nature ofthe amine. Due to steric hindrance, saturated phases are not obtained forall amines studied. The thermal decomposition of the intercalates (nitrogenatmosphere), takes place in three stages: dehydration, removal of amines andcondensation of the hydrogenphosphate to pyrophosphate groups.