Platinum(II)-bis(9-methyladenine) complexes; N1-->N6 migration of Pt(II)vs deamination of coordinated methyladenine

Stepwise migration of coordinated Pt(II) from the endocyclic N1 site to the exocyclic amino group occurs in the bis(9-methyladenine-N1) complex of cis-Pt(II)(NH(3))(2) in basic solution, whereafter deamination of the 9-methyladenine still coordinated at N-1 competes with a second migration step.     

Characterization of ARC/CL wheat flour and potato powder reference materials for content of total dietary fiber

Summary ARC/CL wheat flour and potato powder reference materials (RMs) prepared by the Central Laboratory of the Agricultural Research Centre of Finland, earlier specified for contents of essential and toxic trace elements, were characterized for contents of total dietary fiber (TDF). Recommended concentration values established were obtained on the basis of an interlaboratory comparison study conducted involving 10 reference laboratories recognized for their reliability in TDF determinations. The recommended TDF contents established were based on an enzymatic-gravimetric method employed by the participating laboratories to determine TDF or water insoluble (WIS) and water soluble (WS) DF which were then added up to obtain TDF. After exclusion of outliers the recommended concentration values were expressed as the medians ±95% confidence limits of the average values by the participating laboratories. The coefficient of variation obtained for the recommended concentration range of TDF was within 7% for both RMs.     

Effect of sample matrix on the determination of total petroleum hydrocarbons (TPH) in soil by gas chromatography–flame ionization detection

Research papers in different fields of analytics indicate that the effect of matrix-induced chromatographic response enhancement (matrix effect) is a commonly encountered problem in gas chromatography applications. In this paper, an example of the effect of sample matrix on the quantitative determination of total petroleum hydrocarbons (TPH) by GC–FID in soil is presented. Two types of soil were selected for the evaluation. Extraction and analysis of the soil samples was in accordance with CEN prEN 14039. The relative systematic error resulting from the matrix effect was obtained for three different TPH concentrations by statistical comparison of the slopes of the matrix-matched calibration lines and a pure solvent calibration line. Too high TPH concentrations were obtained when conventional solvent calibration was used for quantitation. This demonstrates that matrix-matched calibration should be exploited in the determination of petroleum hydrocarbons in soil samples. However, there was also significant enhancement of the response due to an interfering matrix with decreasing analyte concentration. Enhancement seems to be especially evident in the quantification of TPH over the concentration range encountered in polluted environments. As a result, even when matrix-matched calibration is used for quantitation, it is still necessary to establish the range over which a linear response can be expected. Otherwise too high results for sample TPH concentrations will be obtained.     

Characterization of a total diet reference material (ARC/CL HDP) for contents of essential and toxic elements

Summary A total diet reference material (RM) was prepared by employing material leftover from a nationwide Finnish hospital diet study. The material was carefully homogenized using Ti-blades, freeze-dried, rehomogenized with Ti-blades, passed through a 2 mm nylon sieve and carefully mixed in large glass cylinders. Homogeneity of the material divided into 20 g samples in polyethylene bottles was tested by taking ten 0.5 g samples from the beginning and end of the bottling line and analyzing them for Zn and Mg. The homogeneity was within 1.0% for both Zn and Mg. An interlaboratory comparison study involving reliable reference laboratories that employed a total of seven methods based on independent analytical principles was conducted on the contents of 14 mineral elements. After the exclusion of outliers the recommended concentrations (on a dry weight basis) expressed as the medians±95% confidence limits were established as follows: Ca=2.86±0.124 mg/g, Mg=785±25 g/g, K=9.42±0.30 mg/g, Na=7.87±0.57 mg/g, Fe=30.4±0.9 g/g, Mn=12.9±0.58 g/g, Zn=28.9±1.3 g/g, Cu=3.18±0.19 g/g, Mo=262±35 ng/g, Ni=271±38 ng/g, Se=181±17 ng/g, Pb=43±8 ng/g, Cd=21±3 ng/g and Hg=6.6±3.6 ng/g. All of the above recommended concentration ranges, except that for Ni, fell into category A, i.e. values recommended with a high degree of confidence according to the certification criteria established by Pszonicki.     

LC/MS/MS identification of glycosides produced by biotransformation of cinnamyl alcohol in Rhodiola rosea compact callus aggregates

Cinnamyl alcohol was added to the media of compact callus aggregates (CCA) of Rhodiola rosea for stimulating the production of cinnamyl glycosides. The biotransformation reaction produced high amounts of rosin, while only a very low amount of rosavin was produced. As the consumption rate of cinnamyl alcohol was much higher than production of rosin, the aqueous methanol extracts of compact callus aggregates were studied by liquid chromatography-mass spectrometric methods and four new unexpected biotransformation products of cinnamyl alcohol were identified.     

Zur Stereoisomerie der 2,6-Dichlor-4-methoxyheptane

2,6-Dichloro-4-methoxy-heptanes may exist as 2 optical active isomers and 2 meso compounds. By double addition of ,-dichloro-dimethylether to propene a mixture of these stereoisomers was obtained. They were separated by HPLC. Using¹H- and¹³C-NMR-spectroscopy their configuration could be established.

     

Persistent luminescence — Quo vadis?

The present status of the persistent luminescence mechanisms is reviewed and the remaining unsolved details are discussed. These details include the identification and role of defects in the Eu²⁺-doped and R³⁺ co-doped alkaline earth aluminates (MAl₂O₄) and disilicates (M₂MgSi₂O₇; M:Ca, Sr, Ba) which can be partly resolved by the thermoluminescence (TL) measurements. The use of the synchrotron radiation - presently only sparsely used in the studies of persistent luminescence - is introduced: the oxidation state of the presumed R²⁺/R³⁺/R^IV species occurring in the persistent luminescence materials during the luminescence processes were examined with synchrotron radiation XANES (and EXAFS) methods. The band gap energies (E_g), the defect-related luminescence as well as the 4f⁷→4f⁶5d¹ transition energies were derived from the synchrotron radiation excitation spectra of the materials. Subsequently, the early steps of the density functional theory (DFT) calculations involving the solution of the persistent luminescence mechanisms (band gap energies, position of the Eu²⁺ levels) are discussed. Some remaining challenges are eventually highlighted.     

Evaluating the impact of GC operating settings on GC-FID performance for total petroleum hydrocarbon (TPH) determination

Interlaboratory comparisons for the analysis of mineral oil have indicated that many laboratories have problems in producing data of acceptable quality, mainly because of variations in the gas chromatographic settings used in the determination. A D-optimal design was therefore utilized to study the effects of six different GC operating settings on the GC performance criterion proposed by ISO and CEN draft standards ISO/FDIS 16703:2004 and CEN prEN 14039:2004:E for total petroleum hydrocarbon (TPH) determination. Both qualitative and quantitative factors were investigated. The results indicate that the performance criterion can only be achieved if the splitless injection settings are carefully optimized. Otherwise mass discrimination readily affects the validity of the results. The most critical factors affecting GC performance were the inlet liner design, inlet temperature and injection volume. The methods, however, were robust with respect to small changes in split vent time, GC column flow and FID temperature. The results show that non-discriminating splitless injection can only be obtained by optimizing the injector settings with respect to the significant factors. The main conclusion that can be drawn is that, if no further standardization is to be given for TPH determination by GC-FID, then a proper estimate of the expanded uncertainty should be appended to the TPH results. Only then can the reliability of the TPH results be guaranteed and further justification thus gained to support the end-use of the data.     

Determination of selenium in small volumes of blood plasma and serum by electrothermal atomic absorption spectrometry

A graphite-furnace atomic absorption spectrometric method is described for the determination of selenium in blood plasma and serum. Samples are diluted (1 + 9) with a solution containing nickel and nitric acid and measured by a standard additions method. Repeatability for a serum sample containing 87 μg Se l^-1 was 4.4%. The mean recovery of selenium(IV) from a human protein solution was 97.5%. The method was further tested in an interlaboratory comparison study. The standard additions procedure requires a sample volume of 200 μl and a total time of about 7.5 min. A secondary calibration graph can be used, however, resulting in increased throughput up to 13 samples per hour, and a decrease in the sample volume needed to 100 μl.     

Dual-capillary electroencapsulation of mesoporous silicon drug carrier particles for controlled oral drug delivery

The feasibility of electroencapsulation of mesoporous silicon (PSi) micro- and nanoparticles as a method to seal the PSi particles in mechanically processable solid units, and to facilitate time and site specific drug release from the pores of PSi particles, is of interest in the present work. Suitable microcapsules and micromatrix particles were produced in a single-step process using a setup with two electrospraying nozzles kept at high electric potentials of opposite polarities. The structures of the produced particles were analyzed by microscope and X-ray micro- and nanotomography imaging, and optimization of the electroencapsulation process production efficiency is discussed.