Effects of annealing and the addition of PEG on the PVA based hydrogel by gamma ray

Poly(vinyl alcohol) (PVA) is an interesting material with good biocompatibility, high elasticity and hydrophilic characteristics. PVA hydrogels have been formed through chemical crosslinking with aldehyde, photopolymerization and physical crosslinking with freeze-thawing. In this study, crosslinked hydrogels based on PVA, and poly(ethylene glycol) (PEG) were prepared by gamma-ray irradiation, and then annealed at 120 °C. The properties of a hydrogel such as gel fraction, swelling behavior, gel strength as a function of PEG content and annealing time were investigated. Also, the thermal behaviors were examined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The gel fraction decreases with an increase in PEG content and decrease in annealing time. The tensile strength increases with an increase in annealing time. The thermal behaviors have shown different patterns according to the annealing time. The improved properties suggest that PVA/PEG blend hydrogel can be a good candidate for applications in the articular cartilage.     

Coherently Aligned Porphyrin‐Appended Polynorbornenes

You can append on me! Porphyrin‐appended polynorbornenes derived from 5,6‐endo‐fused N‐arylpyrrolidenonorbornenes have been shown to have coherently aligned pendant groups that exhibit exciton coupling and fluorescence quenching in the absorption and emission profiles (see figure).

     

Soft‐Chemical Exfoliation Route to Layered Cobalt Oxide Monolayers and Its Application for Film Deposition and Nanoparticle Synthesis

A colloidal suspension of exfoliated, layered cobalt oxide nanosheets has been synthesized through the intercalation of quaternary tetramethylammonium ions into protonated lithium cobalt oxide. According to atomic force microscopy, exfoliated nanosheets of layered cobalt oxide show a plateau‐like height profile with nanometer‐level height, underscoring the formation of unilamellar 2D nanosheets. The exfoliation of layered cobalt oxide was cross‐confirmed by X‐ray diffraction, UV/Vis spectroscopy, and transmission electron microscopy. The maintenance of the hexagonal in‐plane structure of the cobalt oxide lattice after the exfoliation process was evidenced by selected‐area electron diffraction and Co K‐edge X‐ray absorption near‐edge structure analysis. The zeta‐potential measurements clearly demonstrated the negative surface charge of cobalt oxide nanosheets. Adopting the nanosheets of layered cobalt oxide as a precursor, we were able to prepare the monodisperse CoO nanocrystals with a particle size of ≈10 nm as well as the heterolayered film composed of cobalt oxide monolayer and polycation.     

Post-blast detection of traces of explosives by means of Fourier transform infrared spectroscopy

Samples obtained from debris after explosions of about 30 g of energetic materials were analyzed by means of Fourier transform infrared (FTIR) spectroscopy using both, Globar and synchrotron infrared radiation at the ISMI beamline of the Singapore synchrotron light source (SSLS). Low- and high-strength-of-explosion blasts were performed during each test run with the same explosive material. From the spectroscopic measurements, traces of unreacted explosives were found on more than 200 different materials that served as sample catchers in the explosions.The integrality of the experiments done confirmed that FTIR spectroscopy is a sufficiently sensitive method to detect traces of explosives in post-blast residues even of high-strength explosions. The method requires only a minimal amount of sample and enables accurate and very fast identification of the presence of explosive material. Finally, the synchrotron radiation infrared source provided one order of magnitude higher sensitivity compared to the conventional Globar source.     

Microbead-assisted PDA sensor for the detection of genetically modified organisms

A simple and sensitive approach for the detection of marker protein, phosphinothricin acetyltransferase, from genetically modified crops was developed based on the colorimetric transition of polydiacetylene (PDA) vesicles in combination with silica microbeads. PDAs have attracted a great deal of interests as a transducing material due to their special features that allow colorimetric response to sensory signals, as well as their inherent simplicity. However, most PDA-based biosensors require additional analytical equipment such as a fluorescence microscope or UV–Vis spectrometer. In this study, we report a new approach to increase the degree of color transition by coupling antibody-conjugated PDA vesicles with silica microbeads in an effort to monitor the results with the unaided eye or simple RGB analysis. By immobilizing PDA vesicles on silica microbeads, we were able to overcome the disadvantages of colloidal PDA-based sensors and increase the degree of colorimetric changes in response to target molecules to a concentration as low as 20 nM. The additional stresses were given to PDA vesicles by antigen–antibody bridging of PDA vesicles coupled with microbeads, resulting in enhanced blue–red color transition. All the results showed that PDA vesicles in conjunction with silica microbeads will be a promising transducing material for the detection of target proteins in diagnostic and biosensing applications.     

Colon targeted drug delivery of branch-chained disulphide cross-linked polymers: design,synthesis, and characterisation studies

Drug delivery directly to the colon is a very useful approach for treating localised colonic diseases such as inflammatory bowel disease, ulcerative colitis, and Crohn’s disease. The use of disulphide cross-linked polymers in colon targeted drug delivery systems has received much attention because these polymers are redox sensitive, and the disulphide bonds are only cleaved by the low redox potential environment in the colon. The goal of this study was to synthesise tricarballylic acid-based trithiol monomers for polymerisation into branch-chained disulphide polymers. The monomer was synthesised via the amide coupling reaction between tricarballylic acid and (triphenylmethyl) thioethylamine using two synthesis steps. The disulphide cross-linked polymers which were synthesised using the air oxidation method were completely reduced after 1 h of reduction with different thiol concentrations detected for the different disulphide polymers. In simulated gastric and intestinal conditions, all polymers had low thiol concentrations compared to the thiol concentrations in the simulated colon condition with Bacteroides fragilis present. Degradation was more pronounced in polymers with loose polymeric networks, as biodegradability relies on the swelling ability of polymers in an aqueous environment. Polymer P15 which has the loosest polymeric networks showed highest degradation.     

Toll-like receptor 9-mediated inhibition of apoptosis occurs through suppression of FoxO3a activity and induction of FLIP expression

Synthetic oligodeoxynucleotides (ODN) with a CpG-motif are recognized by Toll-like receptor 9 (TLR9) and pleiotropic immune responses are elicited. Stimulation of macrophages with TLR9 agonist prevented apoptosis induced by serum deprivation through increased expression of FLICE-like inhibitory protein (FLIP). CpG ODN-mediated anti-apoptosis depended on the TLR9-Akt-FoxO3a signaling pathway. Inhibition of TLR9 by small interfering (si) RNA or an inhibitor suppressed CpG ODN-mediated anti-apoptosis. Analysis of signaling pathways revealed that the anti-apoptotic effect of CpG ODN required phosphorylation of FoxO3a and its translocation from the nucleus to the cytosol. Overexpression of FoxO3a increased apoptosis induced by serum deprivation and CpG ODN blocked these effects through FLIP expression. In contrast, siRNA knock-down of FoxO3a decreased apoptosis by serum deprivation. In addition, Akt activation was involved in CpG ODN-induced phosphorylation of FoxO3a, expression of FLIP, and anti-apoptosis. Taken together, these results demonstrate the involvement of Akt-FoxO3a in TLR9-mediated anti-apoptosis and indicate that FoxO3a is a distinct regulator for FLIP expression.     

Large Porphyrin Squares from the Self‐Assembly of meso‐Triazole‐Appended L‐Shaped meso–meso‐Linked ZnII–Triporphyrins: Synthesis and Efficient Energy Transfer

meso‐Triazolyl‐appended Zn^II–porphyrins were readily prepared by Cu^I‐catalyzed 1,3‐dipolar cycloaddition of benzyl azide to meso‐ethynylated Zn^II–porphyrin (click chemistry). In noncoordinating CHCl₃ solvent, spontaneous assembly occurred to form tetrameric array ( 3 )₂ from meso–meso‐linked diporphyrins 3 , and dodecameric porphyrin squares ( 4 )₄ and ( 5 )₄ from the L ‐shaped meso–meso‐linked triporphyrins 4 and 5 . The structures of these assemblies were examined by ¹H NMR spectra, absorption spectra, and their gel permeation chromatography (GPC) retention time. Furthermore, the structures of the dodecameric porphyrin squares ( 4 )₄ and ( 5 )₄ were probed by small‐ and wide‐angle X‐ray scattering (SAXS/WAXS) measurements in solution using a synchrotron source. Excitation‐energy migration processes in these assemblies were also investigated in detail by using both steady‐state and time‐resolved spectroscopic methods, which revealed efficient excited‐energy transfer (EET) between the meso–meso‐linked Zn^II–porphyrin units that occurred with time constants of 1.5 ps^?1 for ( 3 )₂ and 8.8 ps^?1 for ( 5 )₄.