The highest water exchange rate ever measured for a Gd(III) chelate

The complex [Gd(L)(H2O)]3- (H(6)L =N,N'-bis(6-carboxy-2-pyridylmethyl)ethylenediamine-N,N'-methylenephosphonic acid) displays the highest water exchange rate ever measured for a Gd(III) chelate (k(298)(ex)= 8.8 x 10(8) s(-1)), which is attributed to the flexibility of the metal coordination environment.     

Determination of residues of quaternary ammonium disinfectants in food products by liquid chromatography-tandem mass spectrometry

A liquid chromatography-tandem mass spectrometry method has been developed for the determination of residues of alkylbenzyldimethylammonium, didecyldimethylammonium, didodecyldimethylammonium, and benzyldodecylhydroxyethylammonium compounds in various food matrixes. These quaternary ammonium compounds (QAs) are used in the food industry as disinfectants. According to the Dutch Food Law, the total mass (expressed as cetyltrimethylammonium chloride) of QAs in food products shall not exceed the legislative limit of 0.5 mg/kg. Samples were extracted by a simple salting-out procedure, using acetonitrile and sodium chloride; about 100 samples could be prepared and analyzed daily. Special care had to be taken to thoroughly homogenize samples and to avoid the use of contaminated labware. The method was validated by a procedure in compliance with EU Directive 2002/657. From the matrixes of ice cream and minced meat, recoveries of more than 95% with a relative standard deviation of about 3% were obtained by 3 different analysts (n = 54). Detection limits were in the low microg/kg range. The decision limit (CCalpha) was determined to be 0.55 mg/kg. Dairy and meat products, collected in The Netherlands, were analyzed (761 samples). In 1% of the meat samples, 2% of the ice cream and milkshake samples, and 24% of the whipped cream samples, the Dutch legislative limit was exceeded. Over 2000 injections could be performed on a single column without deterioration of the peak shapes or recoveries.     

Zeolite GdNaY nanoparticles with very high relaxivity for application as contrast agents in magnetic resonance imaging

In this paper we explore Gd(3+)-doped zeolite NaY nanoparticles for their potential application as a contrast agent in magnetic resonance imaging (MRI). The nanoparticles have an average size of 80-100 nm, as determined by TEM and XRD. A powdered sample loaded with La3+ was characterised by means of multinuclear solid-state NMR spectroscopy. The NMR dispersion (NMRD) profiles obtained from aqueous suspensions of samples with Gd3+ doping ratios of 1.3-5.4 wt% were obtaining at different temperatures. The relaxivity increases drastically as the Gd3+ loading decreases, with values ranging between 11.4 and 37.7 s-1 mM-1 at 60 MHz and 37 degrees C. EPR spectra of aqueous suspensions of the samples suggest that an interaction between neighbouring Gd3+ ions within the same particle produces a significant increase in the transversal electronic relaxation rates in samples with a high Gd3+ content. The experimental NMRD and EPR data are explained with the use of a model that considers the system as a concentrated aqueous solution of Gd3+ in the interior of the zeolite that is in exchange with the bulk water outside the zeolite. The results obtained indicate that the Gd3+ ion is immobilised in the interior of the zeolite and that the relaxivity is mainly limited by the relatively slow diffusion of water protons from the pores of the zeolite channels into the bulk water.     

Molecular recognition of sialic acid end groups by phenylboronates

A multinuclear NMR study of the interaction between phenylboronic acid (PBA) and sialic acid (Neu5 Ac) has been performed. The latter compound is known to be overexpressed on the cell surface of tumor cells. The results of this investigation suggest that the binding of PBA to sialic acid is pH dependent. 17O NMR experiments with glycolic acid as the model compound prove that an interaction at the alpha-hydroxycarboxylate occurs at pH < 9, while a study with threonic and erythronic acids shows that the PBA group interacts selectively with the vicinal diol functions at higher pH. Similarly, Neu5 Ac binds PBA through its alpha-hydroxycarboxylate at low pH (< 9) and through its glycerol side chain at higher pH values. The conditional stability constant of the phenylboronate ester at pH 7.4 is 11.4. On cell surfaces, sialic acid is connected to the neighboring sugar unit through the 2-hydroxy group. To mimic this the 2-alpha-O-methyl derivative of Neu5 Ac was included in this study. The erythro configuration of the hydroxy substituents prevents stable-complex formation at positions C7 and C8 and, consequently, the strongest interaction is observed at positions C8 and C9, leading to a five-membered 2-boron-1,3-dioxalate. In addition, a relatively small amount of the C7-C9 six-membered complex was observed. Molecular modeling studies confirm that the C8-C9 boronate complex has the lowest energy.     

Role of lactobacillus cell surface hydrophobicity as probed by AFM in adhesion to surfaces at low and high ionic strength

The S-layer present at the outermost cell surface of some lactobacillus species is known to convey hydrophobicity to the lactobacillus cell surface. Yet, it is commonly found that adhesion of lactobacilli to solid substrata does not proceed according to expectations based on cell surface hydrophobicity. In this paper, the role of cell surface hydrophobicity of two lactobacillus strains with and without a surface layer protein (SLP) layer has been investigated with regard to their adhesion to hydrophobically or hydrophilically functionalized glass surfaces under well-defined flow conditions and in low and high ionic strength suspensions. Similarly, the interaction of the lactobacilli with similarly functionalized atomic force microscope (AFM) tips was measured. In a low ionic strength suspension, both lactobacillus strains show higher initial deposition rates to hydrophobic glass than to hydrophilic glass, whereas in a high ionic strength suspension no clear influence of cell surface hydrophobicity on adhesion is observed. Independent of ionic strength, however, AFM detects stronger interaction forces when both bacteria and tip are hydrophobic or hydrophilic than when bacteria and tip have opposite hydrophobicities. This suggest that the interaction develops in a different way when a bacterium is forced into contact with the tip surface, like in AFM, as compared with contacts developing between a cell surface and a macroscopic substratum under flow. In addition, the distance dependence of the total Gibbs energy of interaction could only be qualitatively correlated with bacterial deposition and desorption in the parallel plate flow chamber.     

Exact size consistency of multireference Møller–Plesset perturbation theory

Single‐reference closed‐shell Møller–Plesset perturbation theory is well known for its size consistency, a quality that is essential for consistent comparisons of calculations on molecules of different size. However, it is far from obvious whether this quality can be retained in the multireference case. In this work it is shown that an exactly size consistently generalization to multireference perturbation theory can be constructed. The central result is that the zeroth‐order Hamiltonian should be constructed using separate projection operators for each excitation level, i.e., it should contain no couplings between different excitation levels. ©1999 John Wiley & Sons, Inc. Int J Quant Chem 72: 549–558, 1999     

The phase transition and optimal synthesis temperature of LiNiO2

The phase transition of LiNiO₂ has been studied by using impedance spectroscopy, DTA, and X-ray diffraction methods. At 720°C the hexagonal phase changes in air to the cubic phase. The phase transition process is rather slow and partially reversible. A peculiar conductivity behavior was observed. From 324°C the conductivity deviates from Arrhenius behavior and is temperature-invariant until 613°C. Subsequently, it decreases rapidly with increase of the temperature. This phenomenon is related to the occupation of Ni²⁺ in Li⁺ positions. The optimal sintering temperature for LiNiO₂ is suggested to be 700°C.     

Prenucleation Self‐Assembly and Chiral Discrimination Mechanisms during Solution Crystallisation of Racemic Diprophylline

The crystallisation behaviour of (RS)‐diprophylline (DPL) in two different solvents is investigated to assess the incidence of solvated pre‐associations on nucleation, crystal growth and chiral discrimination. In the solvated state, Raman spectroscopy shows that dimeric associations similar to those depicted in the crystalline solid solution (ssRII) predominate in isopropanol (IPA), which may account for the systematic spontaneous nucleation of this crystal form from this solvent. By contrast, spontaneous nucleation in DMF yields the stable racemic compound RI, consistently with the distinct features of the Raman spectrum collected in this solvent. A crystal growth study of ssRII in IPA reveals that the crystal habitus is impacted by the solution enantiomeric excess; this is explained by increased competition between homo‐ and heterochiral pre‐associations. This is supported by a molecular modelling study on the enantiomeric selectivity of the DPL crystal lattices. The combination of assessment methods on solution chemistry, nucleation and chiral discrimination provides methodological tools from which the occurrence of solid solutions can be rationalised.