Evidence for orbital-specific electron transfer to oriented haloform molecules

Beams of hyperthermal K atoms cross beams of the oriented haloforms CF(3)H, CCl(3)H, and CBr(3)H, and transfer of an electron mainly produces K(+) and the X(-) halide ion which are detected in coincidence. As expected, the steric asymmetry of CCl(3)H and CBr(3)H is very small and the halogen end is more reactive. However, even though there are three potentially reactive centers on each molecule, the F(-) ion yield in CF(3)H is strongly dependent on orientation. At energies close to the threshold for ion-pair formation ( approximately 5.5 eV), H-end attack is more reactive to form F(-). As the energy is increased, the more productive end switches, and F-end attack dominates the reactivity. In CF(3)H near threshold the electron is apparently transferred to the sigma(CH) antibonding orbital, and small signals are observed from electrons and CF(3)(-) ions, indicating "activation" of this orbital. In CCl(3)H and CBr(3)H the steric asymmetry is very small, and signals from free electrons and CX(3)(-) ions are barely detectable, indicating that the sigma(CH) antibonding orbital is not activated. The electron is apparently transferred to the sigma(CX) orbital which is believed to be the LUMO. At very low energies the proximity of the incipient ions probably determines whether salt molecules or ions are formed.     

Synthesis of the C6-C21 segment of amphidinolide E

[reaction: see text] A convergent approach to a C6-C21 segment of the polyketide amphidinolide E has been developed through combination of three subunits by allenylindium bromide-aldehyde addition and Suzuki sp2-sp3 coupling.     

Carbolithiation of aromatic rings: cyclohexadienes from N-aroyl-2,2,6,6-tetramethylpiperidines

Benzamides whose nitrogen atom is part of a 2,2,6,6-tetramethylpiperidine ring are dearomatised by alkyllithiums, which attack them regioselectively to yield, after electrophilic quench, substituted cyclohexadienes.     

Comparison of mass resolution criteria in mass spectrometry

For a single peak, mass spectral resolution can be expressed in terms of peak width or ratio of peak position to peak width. Alternatively, for two equally intense peaks of equal width, resolution can be defined as the minimum peak separation such that the height of the valley between the combined peaks is less than a specified ratio (1%, 10%, 50%, 100%) of the individual (or combined) peak maximum. All these definitions depend on peak shape. Conversion formulae between various mass resolution criteria are presented for each of eight spectral peak shapes: Gaussian, triangular, trapezoidal, Lorentzian (absorption-mode, magnitude-mode, and sine-apodized magnitude-mode), and sinc (absorption-mode and magnitude-mode). From these formulae, mass resolutions based upon different criteria are readily compared for the same or different line shapes.     

Pseudo-MS3 in a MALDI orthogonal quadrupole-time of flight mass spectrometer

Both the matrix selected and the laser fluence play important roles in MALDI-quadrupole/time of flight (QqTOF) fragmentation processes. "Hot" matrices, such as alpha-cyano4-hydroxycinnamic acid (HCCA), can increase fragmentation in MS spectra. Higher laser fluence also increases fragmentation. Typical peptide fragment ions observed in the QqTOF are a, b, and y ion series, which resemble low-energy CID product ions. This fragmentation may occur in the high-pressure region before the first mass-analyzing quadrupole. Fragment ions can be selected by the first quadrupole (Q1), and further sequenced by conventional MS/MS. This allows pseudo-MS3 experiments to be performed. For peptides of higher molecular weight, pseudo-MS3 can extend the mass range beyond what is usually accessible for sequencing, by allowing one to sequence a fragment ion of lower molecular weight instead of the full-length peptide. Peptides that predominantly show a single product ion after MS/MS yield improved sequence information when this technique is applied. This method was applied to the analysis of an in vitro phosphorylated peptide, where the intact enzymatically-generated peptide showed poor dissociation via MS/MS. Sequencing a fragment ion from the phosphopeptide enabled the phosphorylation site to be unambiguously determined.     

Two pseudopolymorphic hydrates of brucine: brucine–water (1/4) and brucine–water (1/5.25) at 130 K

The structures of two pseudopolymorphic hydrates of brucine, C₂₃H₂₆N₂O₄·4H₂O, (I), and C₂₃H₂₆N₂O₄·5.25H₂O, (II), have been determined at 130 K. In both (I) and (II) (which has two independent brucine mol­ecules together with 10.5 water mol­ecules of solvation in the asymmetric unit), the brucine mol­ecules form head‐to‐tail sheet substructures, which associate with the water mol­ecules in the inter­stitial cavities through hydrogen‐bonding associations and, together with water–water associations, give three‐dimensional framework structures.     

Peptide microarrays for the determination of protease substrate specificity

A method is described for the preparation of substrate microarrays that allow for the rapid determination of protease substrate specificity. Peptidyl coumarin substrates, synthesized on solid support using standard techniques, are printed onto glass slides using DNA microarraying equipment. The linkage from the peptide to the slide is formed through a chemoselective reaction, resulting in an array of uniformly displayed fluorogenic substrates. The arrays can be treated with proteases to yield substrate specificity profiles. Standard instrumentation for visualization of microarrays can be used to obtain comparisons of the specificity constants for all of the prepared substrates. The utility of these arrays is demonstrated by the selective cleavage of preferred substrates with trypsin, thrombin, and granzyme B, and by assessing the extended substrate specificity of thrombin using a microarray of 361 different peptidyl coumarin substrates.     

Kinetic evaporation and condensation rates and their coefficients

The origins and properties of evaporation and condensation coefficients are described, and results of their measurement are surveyed for water and liquid metals. Contrasts are drawn as to whether their values are likely to limit practical transfer rates at plane surfaces and on aerosols, and between evaporation and condensation. Existing theories which express condensation and evaporation rates in terms of the coefficients are described. Their failure to satisfy energy and momentum conservation as well as mass conservation at the interface is remedied by constructing a new theory which also starts with vapor molecules in Maxwell-Boltzmann distributions. The resulting rates are shown to be close to those predicted by more accurate theories in which the Boltzmann transport equation is solved.     

Determination of vitamins A (retinol) and E (alpha-tocopherol) in foods by liquid chromatography: collaborative study

A collaborative study was conducted for the determination of vitamins A and E. Existing AOAC liquid chromatographic (LC) methods are suited for specific vitamins A and E analytical applications. This method differs from existing methods in that it can be used to assay samples in all 9 sectors of the food matrix. Standards and test samples are saponified in basic ethanol-water solution, neutralized, and diluted, converting fats to fatty acids and retinol esters and tocopherol esters to retinol and tocopherol, respectively. Retinol and alpha-tocopherol are quantitated on separate LC systems, using UV detection at 313 or 328 nm for retinol, and fluorescence detection (excitation 290 nm, emission 330 nm) for alpha-tocopherol. Vitamin concentrations are calculated by comparison of the peak heights or peak areas of vitamins in test samples with those of standards.     

Evaluation of a dual electrospray ionization/atmospheric pressure chemical ionization source at low flow rates (∼50 µL/min) for the analysis of both highly and weakly polar compounds

The atmospheric pressure ionization (API) source for a commercial mass spectrometer was modified to operate as a dual source in both the electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) techniques by simultaneously utilizing the electrospray probe and the corona discharge needle. A switching box was designed to operate in either manual or programmable modes to permit rapid switching between ionization techniques without changing sources, probes, or breaking vacuum. The source can be operated using the following ionization techniques: ESI only, APCI only, ESI/APCI simultaneously, and ESI/APCI alternatingly. The optimum operating conditions for these ionization techniques were similar to the manufacturer’s original specifications except that the APCI flow rate was lower (～50 µL/min versus 1000 µL/min) and externally heated nebulizing gas was found to be desirable. A four-component mixture, introduced by flow injection, was used to demonstrate the versatility of the dual ESI/APCI source.