Hysteresis phenomenon in supersonic flow past a system of cylinders

The interaction between the bow shocks ahead of a system of bodies in a supersonic flow is numerically investigated. Flow past cylinders with parallel axes lying in the plane perpendicular to the flow direction is calculated. Three different shock interaction patterns are obtained in modeling flow past an infinite periodic lattice, namely, the regular and Mach-type regimes and a regime with flow choking. In the case of two bodies a collective bow shock is formed. Transition between the flow patterns with variation in the freestream Mach number and the spacing between the cylinders is studied. Regular-to-Mach-configuration transition and vice versa occurs at particular angles of inclination of the bow shock at the interaction point determined by the criterion of a maximum flow deflection angle and the von Neumann criterion, respectively.     

Anion-Responsive Fluorescent Supramolecular Gels

Three novel bis-urea fluorescent low-molecular-weight gelators (LMWGs) based on the tetraethyl diphenylmethane spacer—namely, L1, L2, and L3, bearing indole, dansyl, and quinoline units as fluorogenic fragments, respectively, are able to form gel in different solvents. L2 and L3 gel in apolar solvents such as chlorobenzene and nitrobenzene. Gelator L1 is able to gel in the polar solvent mixture DMSO/H₂O (H₂O 15% v/v). This allowed the study of gel formation in the presence of anions as a third component. An interesting anion-dependent gel formation was observed with fluoride and benzoate inhibiting the gelation process and H₂PO₄⁻, thus causing a delay of 24 h in the gel formation. The interaction of L1 with the anions in solution was clarified by ¹H-NMR titrations and the differences in the cooperativity of the two types of NH H-bond donor groups (one indole NH and two urea NHs) on L1 when binding BzO⁻ or H₂PO₄⁻ were taken into account to explain the inhibition of the gelation in the presence of BzO⁻. DFT calculations corroborate this hypothesis and, more importantly, demonstrate considering a trimeric model of the L1 gel that BzO⁻ favours its disruption into monomers inhibiting the gel formation.     

Antiviral Activities of Algal-Based Sulfated Polysaccharides

An antiviral agent is urgently needed based on the high probability of the emergence and re-emergence of future viral disease, highlighted by the recent global COVID-19 pandemic. The emergence may be seen in the discovery of the Alpha, Beta, Gamma, Delta, and recently discovered Omicron variants of SARS-CoV-2. The need for strategies besides testing and isolation, social distancing, and vaccine development is clear. One of the strategies includes searching for an antiviral agent that provides effective results without toxicity, which is well-presented by significant results for carrageenan nasal spray in providing efficacy against human coronavirus-infected patients. As the primary producer of sulfated polysaccharides, marine plants, including macro- and microalgae, offer versatility in culture, production, and post-isolation development in obtaining the needed antiviral agent. Therefore, this review will describe an attempt to highlight the search for practical and safe antiviral agents from algal-based sulfated polysaccharides and to unveil their features for future development.     

Control of resonant peak depths of tunable long-period fiber gratings using overcoupling

We present a method to reduce changes in the resonant peak depth of a long-period fiber grating (LPFG) as the resonant band is tuned by varying the external refractive index. We theoretically analyze the effects of the initial coupling strength on the peak depth change as external refractive index is varied. By controlling the initial coupling strength, it is experimentally demonstrated that an optimum peak depth can be obtained over a range of operating wavelengths that will maximize the sensitivity and stability of LPFG based sensors and tunable filters.     

Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water

The application of a closed thick film flowing filtered water to immerse the ablation etching mechanism of an excimer laser poses interesting possibilities concerning debris control, modification of machined feature topography and modification of the ablation rate. Furthermore, these parameters have been shown to be dependent on flow velocity; hence, offering further user control of machining characteristics. However, the impact of this technique requires investigation. This contribution offers comparison of the calculated ablation pressure and the effect on feature surface characteristics given for laser ablation of bisphenol A polycarbonate using KrF excimer laser radiation in ambient air against laser ablation of the same substrate under closed thick film flowing filtered water immersion. Also, an impact of such immersion equipment on the optical performance of the micromachining centre used is quantified and reviewed. The pressure is calculated to have risen by a magnitude of 48, when using the liquid immersed ablation technique. This increase in pressure is proposed to have an increased surface roughness, promoting the number of asperities with a surface area lower than 16 μm²; resulting in a diffuse reflection of light and an apparent darkening of features. The focal length of the optical system was accurately predicted to increase by 2.958 mm, when using the closed flowing liquid immersion equipment. This equipment is predicted to have increased the optical depth of focus via reduction in the angle of convergence of the two defining image rays; yet the perceived focus, measured discretely by mean feature wall angle, was found to be 25% smaller when using the closed thick film flowing filtered water immersion technique instead of similar laser ablation in ambient air. A compressed plume interaction is proposed as a contributing factor in this change.     

An introduction to induced loudness reduction

Induced loudness reduction (ILR) is a phenomenon by which a preceding higher-level tone (an inducer tone) reduces the loudness of a lower-level tone (a test tone). The strength of this effect depends on a number of parameters, reviewed here. Some of the implications of ILR on loudness data are presented via the analysis of several studies in which ILR likely resulted in otherwise unexplained biases in data sets. These results serve as examples of the pervasiveness of ILR in loudness measurements and indicate that it is necessary to consider ILR when designing any psychoacoustical experiment in which level varies.     

Noise robustness of the nonlocality of entangled quantum states

We study the nonlocal properties of states resulting from the mixture of an arbitrary entangled state rho of two d-dimensional systems and completely depolarized noise, with respective weights p and 1-p. We first construct a local model for the case in which rho is maximally entangled and p at or below a certain bound. We then extend the model to arbitrary rho. Our results provide bounds on the resistance to noise of the nonlocal correlations of entangled states. For projective measurements, the critical value of the noise parameter p for which the state becomes local is at least asymptotically log(d) larger than the critical value for separability.     

Functional MRI of working memory and selective attention in vibrotactile frequency discrimination

Background  

Focal lesions of the frontal, parietal and temporal lobe may interfere with tactile working memory and attention. To characterise the neural correlates of intact vibrotactile working memory and attention, functional MRI was conducted in 12 healthy young adults. Participants performed a forced-choice vibrotactile frequency discrimination task, comparing a cue stimulus of fixed frequency to their right thumb with a probe stimulus of identical or higher frequency. To investigate working memory, the time interval between the 2 stimuli was pseudo-randomized (either 2 or 8 s). To investigate selective attention, a distractor stimulus was occasionally presented contralaterally, simultaneous to the probe.     

Low dose 60Co gamma-irradiation effects on electronic carrier transport and DC characteristics of AlGaN/GaN high-electron-mobility transistors

The impact of internal irradiation with secondary Compton electrons, generated by gamma-photons, on the characteristics of III-N/GaN-based devices was explored. N-channel AlGaN/GaN high-electron-mobility transistors (HEMTs) were exposed to gamma-radiation from a ⁶⁰Co source for doses up to 600?Gy. Temperature-dependent electron beam-induced current (EBIC) was employed to measure minority carrier transport properties. For low doses below ～250?Gy, the minority carrier diffusion length in AlGaN/GaN HEMTs is shown to increase by about 40%. This increase is likely due to longer minority carrier lifetime induced by internal Compton electron irradiation. An associated decrease in activation energy, extracted from temperature-dependent EBIC, was also found. The obtained increase in transconductance and decrease in gate leakage current indicate an improvement in performance of the devices after low doses of irradiation. For high doses of gamma-irradiation, above ～300?Gy, the performance of HEMTs showed a deterioration. The deterioration results from the onset of increased carrier scattering due to additional radiation-induced defects, as is translated in a decrease of minority carrier diffusion length.     

Periodic magnetic geodesics on Heisenberg manifolds

Annals of Global Analysis and Geometry - We study the dynamics of magnetic flows on Heisenberg groups, investigating the extent to which properties of the underlying Riemannian geometry are...