Modelling relation between oxidation resistance and tribological properties of non-toxic lubricants with the use of artificial neural networks

The lubricants based on vegetable oils, as environmental friendly, are urgently sought. However, in addition to ecological characteristics, the lubricating properties have to be met. To meet these requirements the active additives influencing the lubricating properties and oxidation resistance are used. The useful lifetime of lubricants is determined largely by their abilities to resist oxidation. The article presented the results of new, ecological lubricants development. The oxidation performances of different developed lubricants have been tested. The experimentally determined oxidation stability of the compositions based on vegetable oils are presented. Analysed oxidation onset temperature was obtained from the differential scanning calorimetry (DSC) curves, which provides the rapid prediction of the oxidative stability of lubricants. Besides the lubricating composition based on vegetable oils, the developed greases-based mineral, or synthetic oil were investigated. The properties of these greases were evaluated using the measurement of parameters describing structure (penetration) and resistance to high temperature (dropping point). The lubricating properties of both the greases and vegetable oil compositions were tested on four-ball testing machine. In the results of the modelling of the lubricating properties the neural network models for the both types of the lubricants were developed. A discussion of the research results and analysis of models validity is given below. The experimental results are compared with the calculated using the neural models. An acceptable agreement was achieved.     

Thermal degradation of copolymers based on selected alkyl methacrylates

The thermal stability and thermal degradation of copolymers based on selected alkyl methacrylates at temperatures between 250 and 400?°C have been studied using pyrolysis?Cgas chromatography. The type and composition of thermal degradation products gave useful information about the mechanism of pyrolysis of copolymers synthesized by using typical commercially available alkyl methacrylates. It was observed that the main thermal degradation products from alkyl methacrylate copolymers are monomers of alkyl methacrylates using by synthesis. Other pyrolysis by-products formed during thermal degradation were carbon dioxide, carbon monoxide, methane, ethane, methanol, ethanol, and propanol-1.     

Metal(II) Ion Complexes with 5‐(Pyrazin‐2‐yl)‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thione; Synthesis,Structural Characterization,Acid‐base,and Complexing Properties in Solution

The study reports the synthesis of complexes Co(HL)Cl₂ ( 1 ), Ni(HL)Cl₂ ( 2 ), Cu(HL)Cl₂ ( 3 ), and Zn(HL)₃Cl₂ ( 4 ) with the title ligand, 5‐(pyrazin‐2‐yl)‐1,2,4‐triazole‐5‐thione (HL), and their characterization by elemental analyses, ESI‐MS (m/z), FT‐IR and UV/Vis spectroscopy, as well as EPR in the case of the Cu^II complex. The comparative analysis of IR spectra of the metal ion complexes with HL and HL alone indicated that the metal ions in 1 , 2 , and 3 are chelated by two nitrogen atoms, N(4) of pyrazine and N(5) of triazole in the thiol tautomeric form, whereas the Zn^II ion in 4 is coordinated by the non‐protonated N(2) nitrogen atom of triazole in the thione form. pH potentiometry and UV/Vis spectroscopy were used to examine Co^II, Ni^II, and Zn^II complexes in 10/90 (v/v) DMSO/water solution, whereas the Cu^II complex was examined in 40/60 (v/v) DMSO/water solution. Monodeprotonation of the thione triazole in solution enables the formation of the L:M = 1:1 species with Co^II, Ni^II and Zn^II, the 2:1 species with Co^II and Zn^II, and the 3:1 species with Zn^II. A distorted tetrahedral arrangement of the Cu^II complex was suggested on the basis of EPR and Vis/NIR spectra.     

Spin disorder scattering in magnetic metallic alloys

Anomalous behavior of the resistivity at or just below the Néel temperature in antiferromagnetic metals is usually attributed to the formation of superzone gaps. However, we find that RMn12-xFex alloys which have no such gaps exhibit a similarly anomalous resistivity. We show that electron scattering by substitutional spin disorder can account for such behavior of itinerant magnets. This mechanism, which has not been studied before, leads to a relaxation rate that is proportional to x(12-x)m(2), where m is the staggered magnetization. Together with spin fluctuations, phonon, and impurity scattering, it accounts well for the resistivity data we obtain for HoMn12-xFex, for 0< or =x< or =9, in the temperature range of 4 to 400 K.     

Determination of nonsteroidal antiinflammatory drugs in water samples using liquid chromatography coupled with diode-array detector and mass spectrometry

An analytical method for the determination of trace levels of six different nonsteroidal antiinflammatory drugs (NSAIDs) in water samples has been developed and validated. Environmentally relevant pharmaceuticals were chosen according to human consumption in Poland. Final analysis of the target compounds was performed by RP LC-diode-array detection-MS, whereas sample preparation included an SPE step. For this SPE step, a number of packing materials, such as LiChrolut RP-18, calixarene, Strata-X, BAKERBOND Narc-2, BAKERBOND Polar Plus, BAKERBOND styrene divinylbenzene-1, and Discovery DSC-18, were used, and their respective advantages and disadvantages in this study were discussed. The RP-18 phase was found to be the most retentive for all analytes. The detection limits for compounds in surface waters were varied from 0.005 for diflunisal to 0.095 microg/L for ibuprofen. The average recoveries of NSAIDs from the surface water samples ranged from 80 up to 103%. RSD value is relatively low (from 4% for fenoprofen up to 8% for ibuprofen). The performance of the method was tested with several environmental water samples.     

A fine-tuned molybdenum hexacarbonyl/phenol initiator for alkyne metathesis

A new, highly potent activator for molybdenum hexacarbonyl and 2-fluorophenol is described. An "instant"catalyst formed in situ from molybdenum hexacarbonyl and 2-fluorophenol shows high activity for cross- and ring-closing alkyne metathesis reaction. The use of 2-fluorophenol can be combined with other activation methods to allow alkyne metathesis at relatively low temperature (80 degrees C).     

Anchor chain length alters the apparent mechanism of chloride channel function in SCMTR derivatives

Two membrane-anchored heptapeptides have been prepared and their pore-formation behavior in phospholipid bilayer membranes has been found to differ profoundly as a result only of alkyl chain length.     

Is planarity of pyridin-2-yl- and pyrazin-2-yl-formamide thiosemicarbazones related to their tuberculostatic activity? X-ray structures of two pyrazine-2-carboxamide-N′-carbonothioyl-hydrazones

Crystal structures of two title compounds and several their relatives known earlier reveal conservative and characteristic features, which may be related to their tuberculostatic activity. The molecules are predominantly planar due to conjugation through five successive bonds in the zwitterionic fragment S⁻–C(sp²)–N–NH⁺–C(sp²)–NH₂ and intramolecular hydrogen bonds, which prevent rotation of the adjacent pyrazine (or pyridine) ring. It has been suggested that in spatial sense such planar molecules resemble acridines intercalating with nucleic acids and that similar process may be responsible for tuberculostatic activity of the title pyrazine-2-carboxamide-N′-carbonothioyl-hydrazones.     

Chiral polymers containing a carbohydrate moiety: synthesis

This paper reports the preparation of poly(acetal-ethers) by two alternative synthetic pathways (alkaline and acid-catalyzed conditions). Polycondensations of methyl 2,3:4,6-di-O-salicylidene-alpha-D-mannopyranoside (3) (mixtures of endo-H and exo-H dioxolan-2-yl-diastereomers) with 1,4-dibromobutane (4) (method I a and I b) were performed in solvents (DMF, butyl acetate/DMF, DMSO) and were catalyzed by K2CO3/KI or KOH. A similar polymer (6) was formed by the reaction of methyl alpha-D-mannopyranoside (1) and 1,4-bis(2-formylphenoxy)butane (7), catalyzed by p-toluenesulfonic acid (method II). Regardless of conversion or initial comonomer feed ratios, the composition of the polycondensates depended on the reaction conditions, leading to the formation of macrocyclic [1 + 1] (5) and [2 + 2] compounds, which were macromolecules with diverse molecular weights and optical properties. The regioselective polycondensation was examined by 1H NMR spectroscopy of selected polymers. In the case of 5-membered cyclic acetal units, mixtures of the endo-H and exo-H dioxolan-2-yl system, diastereomers were formed in the polymer chain. The macrocycles and linear oligomers were identified by NMR and electrospray mass spectrometry (ESI-MS). Thermodynamically controlled reactions for making macrocycles as well as oligomers in the absence of templates are also discussed.