Laser-induced breakdown of soda-lime glass microspheres using Nd:YAG laser

The Nd:YAG laser-induced breakdown of 20 μm glass microspheres was investigated using time-resolved optical shadow and Schlieren images. Time-resolved imaging showed the location of the initial breakdown and the shockwave motion over its first 400 μm of expansion. Measured shockwave velocities were in the range of 1–10 km/s and showed a linear dependency on laser fluence within 30 ns.     

Regular simple geodesic loops on a tetrahedron

A regular simple geodesic loop on a tetrahedron is a simple geodesic loop which does not pass through any vertex of the tetrahedron. It is evident that such loops meet each face of the tetrahedron. Among these loops, the minimal loops are those which meet each face exactly once. Necessary and sufficient conditions for the existence of minimal loops are obtained. These conditions fall naturally into two categories, conditions in the first category being called coherence conditions and conditions in the second category being called separation conditions. It is shown that for the existence of three distinct minimal loops through any point on the face of a tetrahedron it is necessary and sufficient that the tetrahedron be isosceles, which, in turn, amounts to the tetrahedron satisfying three coherence conditions. All other regular simple geodesic loops on an isosceles tetrahedron are then classified. Finally, coherence conditions for the existence of similar loops on an arbitrary tetrahedron are found.     

Alternating copolyfluorenevinyles with polynuclear aromatic moieties: Synthesis,photophysics, and electroluminescence

Three new copolymers, namely poly(fluorenevinylene‐alt‐naphthalenevinylene) ( N ), poly(fluorenevinylene‐alt‐anthracenevinylene) ( A ) and poly(fluorenevinylene‐alt‐pyrenevinylene) ( P ), were synthesized by Heck coupling of 9,9‐dihexyl‐2, 7‐divinylfluorene with a polynuclear aromatic dibromide. The 9,10‐disubstituted anthracene was obtained exclusively for A while N and P were obtained as a mixture of two isomers with predominant the 1,4‐disubstituted naphthalene and 1,8‐disubstituted pyrene, respectively. The polymers were soluble in common organic solvents and decomposed above 370 °C. Their glass transition temperature increased from 58 to 110 °C by increasing the number of the phenyl rings of the polynuclear aromatic moiety. Rather high‐efficiency blue and blue‐greenish photoluminescence (PL) of these copolymers in solution was largely decreased in their films, indicating the presence of concentration quenching in the solid state. The OLED using these polymers demonstrated green EL in the case of copolymers N and A , and red EL in the P derivative with η_EL = 0.26–0.31%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4661–4670, 2007     

A goal programming approach to strategic resource allocation in acute care hospitals

This paper describes a methodology for allocating resources in hospitals. The methodology uses two linear goal-programming models. One model sets case mix and volume for physicians, while holding service costs fixed; the other translates case mix decisions into a commensurate set of practice changes for physicians. The models allow decision makers to set case mix and case costs in such a way that the institution is able to break even, while preserving physician income and minimizing disturbance to practice. The models also permit investigation of trade-offs between case mix and physician practice parameters. Results are presented from a decision-making scenario facing the surgical division of Toronto's Mount Sinai Hospital after the announcement of a 3-year, 18% reduction in funding.     

Equivalence of Toda-Hopf invariants

In this paper it is shown that various existing constructions of ‘Hopf invariant’ are equivalent to each other. In consequence one gets that the oneToda-Hopf invariant enjoys various properties. Both authors supported in part by the NSF.     

Synthesis and optical properties of a poly(p‐phenylenevinylene) derivative and polyfluorenes with bipolar groups along the main chain

A poly(p‐phenylenevinylene) derivative (PPV–TPA)] and a series of statistical copolyfluorenes (PF–TPA)] containing oxadiazole and triphenylamine segments along the main chain were synthesized by the Heck reaction and nickel‐mediated coupling, respectively. The PF–TPA copolyfluorenes with relatively low contents of oxadiazole and triphenylamine units were readily soluble in common organic solvents, whereas the other copolyfluorenes displayed lower solubility. PPV–TPA showed excellent solubility in solvents such as tetrahydrofuran (THF), dichloromethane, chloroform, and toluene. Thin films of the polymers absorbed light in the range of 375–396 nm and had optical band gaps of 2.76–2.98 eV. They emitted blue‐green light with a maximum at 414–522 nm. The fluorescence quantum yields in THF solutions were 0.08–0.53. The copolyfluorene PF–TPA thin films with high contents of oxadiazole and triphenylamine moieties emitted pure blue light that remained stable even after annealing at 150 °C for 4 h in air. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3556–3566, 2006     

Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

Kinetics of methylchlorosilane formation on Zn-promoted Cu3Si

The kinetics of the direct synthesis reaction (Si + 2CH₃Cl → (CH₃)₂SiCl₂) were measured on a Cu₃Si alloy containing 1.2 atom % Zn. Reaction was carried out in a differential reactor (520–595 K, 1 atm) attached to an ultrahigh vacuum (UHV) system. Auger spectroscopy was used to characterize the surface before and after reaction. Zinc does not significantly change the overall rate of reaction, but it changes selectivity to dimethyldichlorosilane (the desired product), surface composition, activation energies, and induction times. The rate of silicon diffusion to the surface is not limiting in the presence of zinc. Zinc is found to be a promoter for improved selectivity only in low concentrations, and only a fraction of the surface appears to be active for reaction. The kinetics appear relatively insensitive to the surface composition or the form of surface carbon. A Cu₃Si surface with Zn is shown to be a good model catalyst for the direct synthesis reaction.     

Interpreting Kullback-Leibler divergence with the Neyman-Pearson lemma

Kullback-Leibler divergence and the Neyman-Pearson lemma are two fundamental concepts in statistics. Both are about likelihood ratios: Kullback-Leibler divergence is the expected log-likelihood ratio, and the Neyman-Pearson lemma is about error rates of likelihood ratio tests. Exploring this connection gives another statistical interpretation of the Kullback-Leibler divergence in terms of the loss of power of the likelihood ratio test when the wrong distribution is used for one of the hypotheses. In this interpretation, the standard non-negativity property of the Kullback-Leibler divergence is essentially a restatement of the optimal property of likelihood ratios established by the Neyman-Pearson lemma. The asymmetry of Kullback-Leibler divergence is overviewed in information geometry.