Fiber formation via solution spinning of the cellulose/ammonia/ammonium thiocyanate system

Fiber formation via the cellulose/ammonia/ammonium thiocyanate system by wet spinning has been investigated. This report presents a characterization of the structure and tensile properties of fibers spun under various coagulation conditions. Microscopic observations showed that the molecular size of coagulant was the dominant factor governing the crosssectional shape of the fibers. Density, birefringence, and crystallinity data indicated that a higher cellulose concentration and lower coagulation temperature favored development of a fiber with a denser and more oriented structure. Under optimum conditions, a welldefined fibrillar structure was obtained. Fiber tensile property measurements suggested the existence of a linear relationship between the fiber breaking tenacity and the product of the square of the Hermans' orientation factor and the infrared crystallinity index.     

Laser-induced breakdown of soda-lime glass microspheres using Nd:YAG laser

The Nd:YAG laser-induced breakdown of 20 μm glass microspheres was investigated using time-resolved optical shadow and Schlieren images. Time-resolved imaging showed the location of the initial breakdown and the shockwave motion over its first 400 μm of expansion. Measured shockwave velocities were in the range of 1–10 km/s and showed a linear dependency on laser fluence within 30 ns.     

Regular simple geodesic loops on a tetrahedron

A regular simple geodesic loop on a tetrahedron is a simple geodesic loop which does not pass through any vertex of the tetrahedron. It is evident that such loops meet each face of the tetrahedron. Among these loops, the minimal loops are those which meet each face exactly once. Necessary and sufficient conditions for the existence of minimal loops are obtained. These conditions fall naturally into two categories, conditions in the first category being called coherence conditions and conditions in the second category being called separation conditions. It is shown that for the existence of three distinct minimal loops through any point on the face of a tetrahedron it is necessary and sufficient that the tetrahedron be isosceles, which, in turn, amounts to the tetrahedron satisfying three coherence conditions. All other regular simple geodesic loops on an isosceles tetrahedron are then classified. Finally, coherence conditions for the existence of similar loops on an arbitrary tetrahedron are found.     

Alternating copolyfluorenevinyles with polynuclear aromatic moieties: Synthesis,photophysics, and electroluminescence

Three new copolymers, namely poly(fluorenevinylene‐alt‐naphthalenevinylene) ( N ), poly(fluorenevinylene‐alt‐anthracenevinylene) ( A ) and poly(fluorenevinylene‐alt‐pyrenevinylene) ( P ), were synthesized by Heck coupling of 9,9‐dihexyl‐2, 7‐divinylfluorene with a polynuclear aromatic dibromide. The 9,10‐disubstituted anthracene was obtained exclusively for A while N and P were obtained as a mixture of two isomers with predominant the 1,4‐disubstituted naphthalene and 1,8‐disubstituted pyrene, respectively. The polymers were soluble in common organic solvents and decomposed above 370 °C. Their glass transition temperature increased from 58 to 110 °C by increasing the number of the phenyl rings of the polynuclear aromatic moiety. Rather high‐efficiency blue and blue‐greenish photoluminescence (PL) of these copolymers in solution was largely decreased in their films, indicating the presence of concentration quenching in the solid state. The OLED using these polymers demonstrated green EL in the case of copolymers N and A , and red EL in the P derivative with η_EL = 0.26–0.31%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4661–4670, 2007     

Quantum correlations in dual quantum measurements

 We analyze the quantum measurement properties of dual non-degenerate parametric amplifers in the twin-beam configuration, in the cascaded back-action-evasion configuration, and in Kerr-type photon-number quantum non-demolition measurements. It is found that Einstein-Podolsky-Rosen correlations can be obtained between the quadrature components of an idler mode and the sum of the readout of two signal modes. Furthermore, we discuss dual-mode quantum non-demolition measurements on the combination of two light modes, and the generation of number-state entanglement. Received: 12 April 1996/Revised version: 2 July 1996     

Synthesis and optical properties of a poly(p‐phenylenevinylene) derivative and polyfluorenes with bipolar groups along the main chain

A poly(p‐phenylenevinylene) derivative (PPV–TPA)] and a series of statistical copolyfluorenes (PF–TPA)] containing oxadiazole and triphenylamine segments along the main chain were synthesized by the Heck reaction and nickel‐mediated coupling, respectively. The PF–TPA copolyfluorenes with relatively low contents of oxadiazole and triphenylamine units were readily soluble in common organic solvents, whereas the other copolyfluorenes displayed lower solubility. PPV–TPA showed excellent solubility in solvents such as tetrahydrofuran (THF), dichloromethane, chloroform, and toluene. Thin films of the polymers absorbed light in the range of 375–396 nm and had optical band gaps of 2.76–2.98 eV. They emitted blue‐green light with a maximum at 414–522 nm. The fluorescence quantum yields in THF solutions were 0.08–0.53. The copolyfluorene PF–TPA thin films with high contents of oxadiazole and triphenylamine moieties emitted pure blue light that remained stable even after annealing at 150 °C for 4 h in air. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3556–3566, 2006     

Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

Kinetics of methylchlorosilane formation on Zn-promoted Cu3Si

The kinetics of the direct synthesis reaction (Si + 2CH₃Cl → (CH₃)₂SiCl₂) were measured on a Cu₃Si alloy containing 1.2 atom % Zn. Reaction was carried out in a differential reactor (520–595 K, 1 atm) attached to an ultrahigh vacuum (UHV) system. Auger spectroscopy was used to characterize the surface before and after reaction. Zinc does not significantly change the overall rate of reaction, but it changes selectivity to dimethyldichlorosilane (the desired product), surface composition, activation energies, and induction times. The rate of silicon diffusion to the surface is not limiting in the presence of zinc. Zinc is found to be a promoter for improved selectivity only in low concentrations, and only a fraction of the surface appears to be active for reaction. The kinetics appear relatively insensitive to the surface composition or the form of surface carbon. A Cu₃Si surface with Zn is shown to be a good model catalyst for the direct synthesis reaction.     

Non-Achievability of Metal-Insulator Transition in Two-Dimensional Systems

We present a simple demonstration of the nonfeasibility of metal-insulator transition in an exactly two-dimensional （2D） system. The Hartree-Fock potential in the 3D system is suitably modified and presented for the 2D case. The many body effects are included in the screening function, and binding energies of a donor are obtained as a function of impurity concentration so as to find out the possible way leading metal-insulator transition in the 2D system. While solving for the binding energy for a shallow donor in an isolated well of a GaAs/Ga1-x Als As superlattice system within the effective mass approximation, it leads to unphysical results for higher concentrations. It shows that the phase transition, the bound electron entering into the conduction band whereby （H）min=0, is not possible beyond this concentration. The results suggest thai a phase transition is impossible in 213 systems, supporting the scaling theory of localization. The results are compared with the existing data available and discussed in the light of existing literature.