A Structural Diversity of Molecular Alkaline-Earth-Metal Polyphosphides: From Supramolecular Wheel to Zintl Ion

A series of molecular group 2 polyphosphides has been synthesized by using air-stable [Cp*Fe(η⁵-P₅)] (Cp*=C₅Me₅) or white phosphorus as polyphosphorus precursors. Different types of group 2 reagents such as organo-magnesium, mono-valent magnesium, and molecular calcium hydride complexes have been investigated to activate these polyphosphorus sources. The organo-magnesium complex [(^DippBDI−Mg(CH₃))₂] (^DippBDI={[2,6-ⁱPr₂C₆H₃NCMe]₂CH}⁻) reacts with [Cp*Fe(η⁵-P₅)] to give an unprecedented Mg/Fe-supramolecular wheel. Kinetically controlled activation of [Cp*Fe(η⁵-P₅)] by different mono-valent magnesium complexes allowed the isolation of Mg-coordinated formally mono- and di-reduced products of [Cp*Fe(η⁵-P₅)]. To obtain the first examples of molecular calcium-polyphosphides, a molecular calcium hydride complex was used to reduce the aromatic cyclo-P₅ ring of [Cp*Fe(η⁵-P₅)]. The Ca-Fe-polyphosphide is also characterized by quantum chemical calculations and compared with the corresponding Mg complex. Moreover, a calcium coordinated Zintl ion (P₇)³⁻ was obtained by molecular calcium hydride mediated P₄ reduction.     

Adaptation of electrodes and printable gel polymer electrolytes for optimized fully organic batteries

Despite intensive scientific efforts on the development of organic batteries, their full potential is still not being realized. The individual components, such as electrode materials and electrolytes, are in most cases developed independently and are not adjusted to each other. In this context, we report on the performance optimization of a full-organic solid-state battery system by the mutual adaptation of the electrode materials and an ionic liquid (IL)-based gel polymer electrolyte (GPE). The formulation of the latter was designed for a one-step manufacturing approach and can be applied directly to the electrode surface, where it is UV-cured to yield the GPE without further post-treatment steps. Herein, a special focus was placed on the applicability in industrial processes. A first significant capacity increase was achieved by the incorporation of the IL into the electrode composite. Furthermore, the GPE composition was adapted applying acrylate- and methacrylate-based monomers and combinations thereof with the premise of a fast curing step. Furthermore, the amount of IL was varied, and all combinations were evaluated for their final performance in cells. The latter variation revealed that a high ionic conductivity is not the only determining factor for a good cell performance. Next to a sufficient conductivity, the interaction between electrode and electrolyte plays a key role for the cell performance as it enhances the accessibility of the counter ions to the redox-active sites.     

Pore Development during the Carbonization Process of Lignin Microparticles Investigated by Small Angle X-ray Scattering

Application of low-cost carbon black from lignin highly depends on the materials properties, which might by determined by raw material and processing conditions. Four different technical lignins were subjected to thermostabilization followed by stepwise heat treatment up to a temperature of 2000 °C in order to obtain micro-sized carbon particles. The development of the pore structure, graphitization and inner surfaces were investigated by X-ray scattering complemented by scanning electron microscopy and FTIR spectroscopy. Lignosulfonate-based carbons exhibit a complex pore structure with nanopores and mesopores that evolve by heat treatment. Organosolv, kraft and soda lignin-based samples exhibit distinct pores growing steadily with heat treatment temperature. All carbons exhibit increasing pore size of about 0.5–2 nm and increasing inner surface, with a strong increase between 1200 °C and 1600 °C. The chemistry and bonding nature shifts from basic organic material towards pure graphite. The crystallite size was found to increase with the increasing degree of graphitization. Heat treatment of just 1600 °C might be sufficient for many applications, allowing to reduce production energy while maintaining materials properties.     

Fluorinated Azobenzenes Switchable with Red Light

Molecular photoswitches triggered with red or NIR light are optimal for photomodulation of complex biological systems, including efficient penetration of the human body for therapeutic purposes (“therapeutic window”). Yet, they are rarely reported, and even more rarely functional under aqueous conditions. In this work, fluorinated azobenzenes are shown to exhibit efficient E→Z photoisomerization with red light (PSS_660nm >75 % Z) upon conjugation with unsaturated substituents. Initially demonstrated for aldehyde groups, this effect was also observed in a more complex structure by incorporating the chromophore into a cyclic dipeptide with propensity for self-assembly. Under physiological conditions, the latter molecule formed a supramolecular material that reversibly changed its viscosity upon irradiation with red light. Our observation can lead to design of new photopharmacology agents or phototriggered materials for in vivo use.     

Bis(4-benzhydryl-benzoxazol-2-yl)methane – from a Bulky NacNac Alternative to a Trianion in Alkali Metal Complexes

A novel sterically demanding bis(4-benzhydryl-benzoxazol-2-yl)methane ligand 6 (^4−BzhH2BoxCH₂) was gained in a straightforward six-step synthesis. Starting from this ligand monomeric [M(^4-BzhH2BoxCH)] (M=Na ( 7 ), K ( 8₁ )) and dimeric [{M(^4-BzhH2BoxCH)}₂] (M=K ( 8₂ ), Rb ( 9 ), Cs ( 10 )) alkali metal complexes were synthesised by deprotonation. Abstraction of the potassium ion of 8 by reaction with 18-crown-6 resulted in the solvent separated ion pair [{(THF)₂K@(18-crown-6)}{bis(4-benzhydryl-benzoxazol-2-yl)methanide}] ( 11 ), including the energetically favoured monoanionic (E,E)-(^4-BzhH2BoxCH) ligand. Further reaction of ^4−BzhH2BoxCH₂ with three equivalents KH and two equivalents 18-crown-6 yielded polymeric [{(THF)₂K@(18-crown-6)}{K@(18-crown-6)K(^4-BzhBoxCH)}]_n (n→∞) ( 12 ) containing a trianionic ligand. The neutral ligand and herein reported alkali complexes were characterised by single X-ray analyses identifying the latter as a promising precursor for low-valent main group complexes.     

Light scattering and dielectric relaxation studies of glass forming liquids

Extended Abstract: Glass forming organic liquids and polymers exhibit long range density fluctuations with correlation length ξ in the range of 10–300 nm at temperatures above T_g (1 - 6). This follows from dynamic and static light scattering experiments revealing some unexpected features, which cannot be explained on the basis of conventional liquid state theories: (i) In static light scattering the intensity I(q → 0) is no longer proportional to the isothermal compressibility, (ii) This excess scattering I_exc shows a strong q-dependence (q = (4π/Λ.)sin(θ/2)) corresponding to a correlation length ξ in the above mentioned range, (iii) The Landau-Placzek ratio I_Rayleigh/2I_Brillouin is much too high compared with the results of light scattering theories, (iv) In photon correlation spectroscopy a new ultraslow hydrodynamic mode (Γ ˜ q²) is detected with relaxation rates Γ about 10⁻⁶ to 10⁻⁹ lower than those of the α-process at a given temperature. In order to explain these observations, a two-state fluid model is proposed, which starts from the coexistence of “liquid-like” and “aperiodic solid-like” regions within the liquids. Such ideas have been discussed many times before, so for example A.R. Ubbelohde (7) speculates about “anticrystalline” clusters in liquids. Molecular dynamics simulations of atomic liquids showed that long range orientational fluctuations appear upon supercooling (8). A preferred icosahedral ordering is observed (9) and the number of icosahedral clusters increases with decreasing temperature (10). In connection with the interpretation of the dynamics of supercooled liquids different “two-state” models have been proposed (11 - 15). For the explanation of the light scattering results we propose that the molecules in the different dynamic states (“liquid” or “solid”) aggregate during annealing of the liquid at temperatures above T_g. Experiments showed that the equilibration times can be rather long (3 - 5), but nevertheless the liquids exhibiting long range density fluctuations are in the state of lowest free energy. We claim that our observations are the first experimental proof of the existence of such different dynamic states, which have been discussed many times before. The extended secondary clusters can also be detected by ultra small angle X-ray scattering.     

Colloidal Synthesis and Characterization of Molybdenum Chalcogenide Quantum Dots Using a Two-Source Precursor Pathway for Photovoltaic Applications

The drawbacks of utilizing nonrenewable energy have quickened innovative work on practical sustainable power sources (photovoltaics) because of their provision of a better-preserved decent environment which is free from natural contamination and commotion. Herein, the synthesis, characterization, and application of Mo chalcogenide nanoparticles (NP) as alternative sources in the absorber layer of QDSSCs is discussed. The successful synthesis of the NP was confirmed as the results from the diffractive peaks obtained from XRD which were positive and agreed in comparison with the standard. The diffractive peaks were shown in the planes (100), (002), (100), and (105) for the MoS₂ nanoparticles; (002), (100), (103), and (110) for the MoSe₂ nanoparticles; and (0002), (0004), (103), as well as (0006) for the MoTe₂ nanoparticles. MoSe₂ presented the smallest size of the nanoparticles, followed by MoTe₂ and, lastly, by MoS₂. These results agreed with the results obtained using SEM analysis. For the optical properties of the nanoparticles, UV–Vis and PL were used. The shift of the peaks from the red shift (600 nm) to the blue shift (270–275 nm and 287–289 nm (UV–Vis)) confirmed that the nanoparticles were quantum-confined. The application of the MoX₂ NPs in QDSSCs was performed, with MoSe₂ presenting the greatest PCE of 7.86%, followed by MoTe₂ (6.93%) and, lastly, by MoS₂, with the PCE of 6.05%.     

Lignin and Lignin-Derived Compounds for Wood Applications—A Review

Improving the environmental performance of resins in wood treatment by using renewable chemicals has been a topic of interest for a long time. At the same time, lignin, the second most abundant biomass on earth, is produced in large scale as a side product and mainly used energetically. The use of lignin in wood adhesives or for wood modification has received a lot of scientific attention. Despite this, there are only few lignin-derived wood products commercially available. This review provides a summary of the research on lignin application in wood adhesives, as well as for wood modification. The research on the use of uncleaved lignin and of cleavage products of lignin is reviewed. Finally, the current state of the art of commercialization of lignin-derived wood products is presented.     

Nitrogen binding to the FeMo-cofactor of nitrogenase

Density functional calculations are presented to unravel the first steps of nitrogen fixation of nitrogenase. The individual steps leading from the resting state to nitrogen binding at the FeMo-cofactor with a central nitrogen ligand are characterized. The calculations indicate that the Fe-Mo cage opens as dinitrogen binds to the cluster. In the resting state, the central cage is overall neutral. Electrons and protons are transferred in an alternating manner. Upon dinitrogen binding, one protonated sulfur bridge is broken. An axial and a bridged binding mode of dinitrogen have been identified. Adsorption at the Mo site has been investigated but appears to be less favorable than binding at Fe sites.     

Highly oriented self-assembled monolayers as templates for epitaxial calcite growth

The lateral alignment of [012] habit-modified calcite crystals with respect to a carboxylic acid terminated self-assembled monolayer (SAM) of thiols has been determined. The crystals were grown from a Kitano solution (pH 5.6-6.0), and the samples were investigated with scanning electron microscopy, X-ray diffraction, and polarization microscopy. For the first time, a lattice match in one direction, which is the nearest neighbor direction of the SAM and the calcite <100> direction, has been experimentally shown. The experimental results are in good agreement with the theoretical models proposed in previous work, and it is expected that this method can be applied to similar systems where inorganic crystals nucleate with a preferred orientation to a SAM.