Racematspaltung von chiralen Ferrocenderivaten durch Gegenstromverteilung

Optical resolution by counter-current distribution has been demonstrated on a preparative scale for two chiral ferrocene derivatives, e.g. 1.2-(α-oxotetramethylene)ferrocene (1), and 1.2-(α-butenylene)ferrocene (2), resp., in the system cyclohexane—(+)-diethyltartrate. The optical yields were 12 and 1%, resp., and are in good agreement with the values calculated from the partition coefficients of the enantiomers. The optical purity of1 could be increased to 40% by crystallization from cyclohexane. A resolution of1 with an optical yield of 14% was also possible by thin layer partition chromatography on silica gel using the same solvents.     

Molecular gradients: an efficient approach for optimizing the surface properties of biomaterials and biochips

A variety of molecular gradients of alkanethiols with the structure HS-(CH(2))(m)-X (m = 15; X = COOH, CH(2)NH(2), or CH(3)) and oligo(ethylene glycol)-terminated alkanethiols with the structures HS-(CH(2))(15)-CO-NH-Eg(n) (n = 2, 4, or 6), HS-(CH(2))(15)-CO-NH-Eg(2)-(CH(2))(2)-NH-CO-(CH(2))(4)-biotin, and HS-(CH(2))(15)-CO-NH-Eg(6)-CH(2)-COOH were prepared on polycrystalline gold films. These gradients were designed to serve as model surfaces for fundamental studies of protein adsorption and immobilization phenomena. Ellipsometry, infrared spectroscopy, and X-ray photoelectron spectroscopy, operating in scanning mode, were used to monitor the layer composition, gradient profiles, tail group conformation, and overall structural quality of the gradient assemblies. The gradient profiles were found to be 4-10 mm wide, and they increased in width with increasing difference in molecular complexity between the thiols used to form the gradient. The oligo(ethylene glycol) thiols are particularly interesting because they can be used to prepare so-called conformational gradients, that is, gradients that display a variation in oligo(ethylene glycol) chain conformation from all trans on the extreme Eg(2,4) sides, via an amorphous-like phase in the mixing regimes, to helical at the extreme Eg(6) sides. We demonstrate herein a series of experiments where the above gradients are used to evaluate nonspecific binding of the plasma protein fibrinogen, and in agreement with previous studies, the highest amounts of nonspecifically bound fibrinogen were observed on all-trans monolayers, that is, on the extreme Eg(2,4) sides. Moreover, gradients between Eg(2) and a biotinylated analogue have been prepared to optimize the conditions for the immobilization of streptavidin. Ellipsometry and infrared spectroscopy reveal high levels of immobilization over a fairly broad range of compositions in the gradient regime, with a maximum between 50 and 60% of the biotinylated analogue in the monolayer. A pI gradient composed of (NH(3)(+)/COO(-))-terminated thiols was also prepared and evaluated with respect to its ability to separate differently charged proteins, pepsin, and lysozyme, on a solid surface.     

Saludimerines A and B, novel-type dimeric alkaloids with stereogenic centers and configurationally semistable biaryl axes

The first biarylic bis-morphinanedienone alkaloids, saludimerines A (3a) and B (3b), isolated from a tree of Croton flavens (Euphorbiaceae) are described. These naturally occurring dimers of the known alkaloid salutaridine are joined together via a rotationally hindered biaryl axis, giving rise to atropo-diastereomers that are configurationally stable at room temperature but slowly interconvert in methanolic solution within several days. Their structures were established by spectroscopic methods and by partial synthesis, which was achieved by a highly atropo-diastereoselective biomimetic oxidative coupling of the monomeric precursor, salutaridine. Their axial configurations were elucidated by circular dichroism (CD) investigations, which succeeded despite the fact that the two atropo-diastereomers exhibit near-identical CD spectra. This remarkable phenomenon was rationalized by quantum chemical CD calculations. The configurational assignment of saludimerines A (3a) as P-axial and B (3b) as M was corroborated by atropisomer-specific NOE interactions between protons of the one molecular half with nuclei in the other.     

Determination of heptacaine hydrochloride in solution using nuclear analytical methods

The applicability of two nuclear analytical methods for the determination of hepatacaine hydrochloride in solution was studied, i. e. radionuclide X-ray fluorescence analysis and radiometric titrations based on precipitate formations. Methods used were evaluated on the basis of obtained sensitivity values.     

Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.     

On the theoretical determination of the electron affinity of ozone

Summary Multiconfigurational electron correlation methods have been analyzed in order to theoretically compute the electron affinity (EA) of ozone. The near-degeneracy correlation effects, which are so important in O₃ and O ₃ ^– , have been described using complete active space (CAS) SCF wave functions. Remaining dynamic correlation effects are computed using second-order perturbation theory (the CASPT2 method). The best calculated adiabatic value (including zero-point energy corrections), 2.19 eV, is about 0.09 eV larger than the experimental value. Comparative studies using size-consistent coupled pair functional approaches (CPF and ACPF) have also been performed. The harmonic frequencies in O ₃ ^– have been determined to be: ₁=992, ₂=572, and ₃=879 cm^–1, which gives a zero-point energy of 0.151 eV.     

On-line infrared detection in aqueous micro-volume systems

Mid infrared spectroscopy is a non-destructive technique that can provide detailed information on important, molecule-specific features such as the conformation and functional groups of a large range of compounds. Infrared spectroscopy is now an established and frequently used technique for qualitative analysis, i.e. the identification of chemical constituents in a sample. In addition, its use for quantitative purposes has grown dramatically in recent years. It is important to realise that the analytical problem defines the mode of operation and implementation of the FTIR technique. This Highlight article focuses on the advantages and scope of on-line FTIR detection strategies. However, in common with all techniques, on-line FTIR detection has a number of potential shortcomings, which are also discussed.     

Surface viscoelasticity of phospholipid monolayers at the air/water interface

The surface viscoelastic properties of monolayers of two phospholipids DPPC (L--dipalmitoylphosphatidylcholine) and DMPE (L--dimyristoylphosphatidyl-ethanolamin), at the air-water interface have been investigated. Two techniques were used for the investigation. One involved use of an interfacial shear rheometer (torsion pendulum apparatus ISR1), to provide measurements of the shear viscosity _s as a function of surface pressure, and the second, a modified LB trough with an oscillating barrier to generate periodie dilation and compression so as to measure the dilational elastic modulusE as a function of surface area.Results indicate a strong dependence of _s andE upon monolayer phases. This suggests that the viscoelastic relaxation of monolayers can be understood as molecular rearrangements, domain exchange and molecular reorientations between different monolayer states.     

Stereoselectivity and competing reactions as studied by lipase-catalyzed esterifications in aqueous lecithin-based gelatin gels

 The enzyme catalyzed conversion of R/S-(±)-2-octanol with hexanoic acid to R/S-(±)-2-octyl hexanoate has been studied in different microenvironments and in the presence of the competing substrate ethanol. The reactions were performed in various gels made from aqueous gelatin solutions and liposome dispersions or isotropic liquid solutions, with or without oil and ethanol. The lipase Candida sp. (SP 525) was dissolved in the dispersions or solutions stabilized by the naturally occurring zwitterionic surfactant soybean lecithin. The sectioned porous gel was immersed in hexane containing 0.33 mol dm^-3 of racemic 2-octanol and hexanoic acid. Since ethanol acts both as a substrate and as a part of the gel it is of fundamental interest to know the phase behaviour of the used systems. Partial phase diagrams for the systems ethanol–water–soybean lecithin and ethanol/water (7:3)–oil–soybean lecithin were determined at 298.2 K. The oil was either castor oil or hexadecane. The conversion of R-2-octyl hexanoate was about 0.45 when no or small amounts of ethanol was present, but decreased considerably with high amounts of ethanol present and ethyl hexanoate became the main product. Hydrolysis of R-2-octyl hexanoate was favoured in the latter systems and hexanoic acid formed was immediately esterified to ethyl hexanoate. The conversion of R-2-octyl hexanoate and ethyl hexanoate depends only on the ethanol content present in the systems and is thus independent of the environment of the enzyme. However, the chiral esters synthesized from racemic 2-octanol and hexanoic acid showed high optical purities regardless of the ethanol content. Received: 1 July 1996 Accepted: 30 August 1996     

Bestimmung des Aluminiums in niedrig- und hochlegierten Stählen,in Erzen und Schlacken durch Atomabsorption

The measurement is carried out of aqueous solutions. The burner is supplied with a mixture of acetylene and nitrous oxide. Interfering influences by acid and iron concentrations of the sample solution as well as by organic solvents are shown. The standard deviation is ± 0.001%. The agreement with conventional analysis methods is very good. By this procedure a rapid and safe determination of aluminium will be possible.