Open Problems

Periodica Mathematica Hungarica -     

Laser systems specialized for laser spectroscopy at storage rings

Laser spectroscopy at storage rings often suffers from a limited resolution due to Doppler-broadened resonances. Broadening is caused by the velocity spread of the ions stored in the beam. In the following, the present status of our work on laser systems specialized on the specific needs of laser spectroscopy at storage rings is reported. Two pulsed laser systems were developed. One is a dye laser whose spectral bandwidth can be switched by inserting different Littrow-prisms into the resonator. An increase in bandwidth up to a factor of 45 was achieved. This laser was used for fast qualitative scans and high resolution measurements. The other laser system is a Nd : YAG laser pumped optical parametric oscillator. It is a tunable laser system covering the spectral range from 410 to 4000 nm. Furthermore, a continuous wave laser with a frequency shifted feedback cavity is described. It shows broadband emission with an adjustable bandwidth of up to 4.5 GHz. This laser can be advantageous for laser cooling of ion beams. This revised version was published online in August 2006 with corrections to the Cover Date.     

Moderate Deviations for Longest Increasing Subsequences: The Lower Tail

We derive a moderate deviation principle for the lower tail probabilities of the length of a longest increasing subsequence in a random permutation. It refers to the regime between the lower tail large deviation regime and the central limit regime. The present article together with the upper tail moderate deviation principle in Ref. 12 yields a complete picture for the whole moderate deviation regime. Other than in Ref. 12, we can directly apply estimates by Baik, Deift, and Johansson, who obtained a (non-standard) Central Limit Theorem for the same quantity.     

Potential for micromachined actuation of ultra-wide continuously tunable optoelectronic devices

Tailored scaling represents a principle of success that, both in nature and in technology, allows the effectiveness of physical effects to be enhanced. Mutation and selection in nature are imitated in technology, e.g. by model calculation and design. Proper scaling of dimensions in natural photonic crystals and our fabricated artificial 1D photonic crystals (DBRs, distributed Bragg reflectors) enable efficient diffractive interaction in a specific spectral range. For our optical microsystems we illustrate that tailored miniaturization may also increase the mechanical stability and the effectiveness of spectral tuning by thermal and electrostatic actuation, since the relative significance of the fundamental physical forces involved considerably changes with scaling. These basic physical principles are rigorously applied in micromachined 1.55-μm vertical-resonator-based devices. We modeled, implemented and characterized 1.55-μm micromachined optical filters and vertical-cavity surface-emitting laser devices capable of wide, monotonic and kink-free tuning by a single control parameter. Tuning is achieved by mechanical actuation of one or several air-gaps that are part of the vertical resonator including two ultra-highly reflective DBR mirrors of strong refractive index contrast: (i) Δn=2.17 for InP/air-gap DBRs (3.5 periods) using GaInAs sacrificial layers and (ii) Δn=0.5 for Si₃N₄/SiO₂ DBRs (12 periods) with a polymer sacrificial layer to implement the air-cavity. In semiconductor multiple air-gap filters, a continuous tuning of >8% of the absolute wavelength is obtained. Varying the reverse voltage (U=0–5 V) between the membranes (electrostatic actuation), a tuning range of >110 nm was obtained for a large number of devices. The correlation of the wavelength and the applied voltage is accurately reproducible without any hysteresis. In two filters, tuning of 127 and 130 nm was observed for about ΔU=7 V. The extremely wide tuning range and the very small voltage required are record values to the best of our knowledge. For thermally actuated dielectric filters based on polymer sacrificial layers, Δλ/ΔU=-7 nm/V is found. Received: 10 May 2002 / Published online: 8 August 2002     

Ultrasonic evaluation of anisotropic damage in multiaxially textile-reinforced thermoplastic composites made from hybrid yarns

The basic damage and failure models of multiaxially reinforced composites with a thermoplastic matrix are presented and verified. Within the framework of continuum damage mechanics, a phenomenological model is introduced, where the damage is defined as a change in the elasticity tensor. For damage identification, a specific ultrasonic device was developed. A combination of an immersion set-up and a contact coupling device formed a system for an efficient determination of stiffness-tensor components from convenient sets of velocity measurements. Linked to a tensile machine, it allowed us to measure the anisotropic damage of the new materials group caused by tensile loading. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 2, pp. 221–234, March–April, 2006.     

A note on the Σ1 spectrum of a theory

Let T be a suitable system of classical set theory. We will show, that the Σ₁ spectrum of T, i.e. the set of ordinals having good Σ₁ definition in T is an initial segment of the ordinals. Received: 11 October 1999 / Published online: 12 December 2001     

Diffusive motion of iron microcrystals studied by Mössbauer spectroscopy

A new model is presented which explains well the dramatic decrease of the Mössbauer line intensities with raising temperatures for freely dispersed iron microscrystals. In contrast to other theories which consider mainly vibration to be responsible we discuss here the decrease in terms of large amplitude diffusive rotational or translational jumps of the particles. Such diffusive jumps lead — in agreement with the observation — to a strong reduction of the Mössbauer-intensity without broadening the line width in a noticeable way. The typical potential well for a diffusing particle in an equilibrium position is derived quantitatively to be 13 meV. The model might be important also for a new understanding of the dynamics of catalytic clusters either in contact with each other or with larger solid surfaces.Part of this work was supported by the DFG Sonderforschungsbereich 306, Konstanz