Ultraviolet protection factors for clothing: an intercomparison of measurement systems

In recent years the need to standardize measurement protocols for quantifying the degree of ultraviolet radiation (UVR) protection provided by clothing has led to the introduction of a number of standards around the world. To date, these standards have specified spectral measurements of UVR transmission by clothing and fabrics. Development of a standard test method has become an important part of the testing process, and this article presents results from an intercomparison involving 10 independent testing laboratories and 11 different UVR transmission measurement instruments. In addition to comparing the measured ultraviolet protection factors (UPF), this intercomparison also incorporates detailed scan results from all 10 laboratories and highlights differences in performance of the various instruments in different wavelength regions. Careful examination of these differences can indicate where changes to the systems could be made to allow improvements both in equipment performance and in agreement of the final results. The variability in the measurements of UPF in this study suggest that the protection categories in standards may need to be broadened.     

Solid state radioluminescent lighting

We have demonstrated novel types of tritium-powered, solid-phase radioluminescent (RL) light sources. These lights include: (1) all-organic formulations comprised of polystyrene and fluorescent organic dyes; (2) polydimethylsiloxane-based systems incorporating inorganic phosphors; and (3) inorganic aerogel-based systems doped with phosphors. Three principal design consideration for these new RL lights are described. These include: (1) incorporation of tritium into the solid matrix; (2) molecular engineering to maximize light-output efficiency; and (3) strategies for increasing longevity. The advanced RL lights, which are of interest due to potential advantages in efficiency, brightness and safety, are being developed for emergency lighting uses and for battery and lighting applications in remote locations.     

NMR spectra of salicylohydroxamic acid in DMSO-d6 solution: a DFT study

The ¹H, ¹³C and ¹H, ¹³C COSY NMR spectra of salicylohydroxamic acid (sha) were measured in DMSO-d₆ solution. The B3LYP GIAO method with the 6-311++G(d,p) basis set was chosen to reproduce the experimental spectra. All possible zusammen and entgegen conformers of monomeric sha were computed. After geometry optimisation (B3LYP/6-311++G(d,p)) only nine independent models of the molecule were shown to be stable. Additionally, the NMR chemical shifts of the Onsager model of the most stable monomer were calculated. The computed chemical shifts for the labile protons for all aforementioned geometries meaningfully underestimated experimental results suggesting the existence of the H-bonded structure of sha in DMSO solution. The most probable two dimeric structures along with two solvent-bounded aggregates were subsequently calculated at the same level of theory. The best agreement was obtained for sha H-bonded with two DMSO molecules (confirmed by the absence of concentration effect). The relative error not exceeding 10 and 4% for chemical shifts in ¹H and ¹³C NMR spectra of sha–(DMSO)₂, respectively, showed that the applied method with the B3LYP/6-311++G(d,p) basis set was efficient to predict the NMR shifts of a compound with strong H-bonds. Thus, this allows to assign properly NMR resonances to specific structure formed in DMSO solution.     

Novel methods for the synthesis of 5-substituted-3-carboxy-2,5- and 4,5-dihydrothiophenes and 5-substituted 2- and 3-sulfolenes

Various approaches to the syntheses of 5-substituted-3-carbomethoxy-2,5-dihydrothiophenes and their product sulfolenes, required as synthetic precursors for tangutorine, are described. An efficient route to 3,5-disubstituted-4,5-dihydrothiophenes and hence 3,5-disubstituted-2-sulfolenes by radical chemistry is also described.     

Towards a system for the systematic structural study of intermolecular interactions in crystals of transition metal complexes

Pseudo-macrocyclic complexes of copper(II), and in one instance nickel(II), incorporating the bidentate ligands methyl N-(4-oxo-5,5-diphenyl-4,5-dihydro-1H-imidazol-2-yl)imidocarbamate and N,N-dimethyl-N'-(4-oxo-5,5-diphenyl-4,5-dihydro-1H-imidazol-2-yl)guanidine are reported and their X-ray structures compared with those previously reported for related complexes of two N-(4-oxo- 5,5-diphenyl-4,5-dihydro-1H-imidazol-2-yl)alkanimidamides. A feature of these complexes is that they are capable of forming hydrogen bonded chains or chains in which adjacent complexes are linked by phenyl 'embraces'. Changes in supramolecular structure arising from small changes in ligand structure or on crystallisation from different solvents are also discussed.     

New cobalt(II) and zinc(II) coordination frameworks incorporating a pyridyl-pyrazole ditopic ligand

The metal-directed assembly of new molecular frameworks incorporating 4-(4-pyridyl)pyrazole (L), containing non-linear coordination vectors, is presented. Three metallo-arrays of types [Co(LH)2(NO3)4], [Co(LH)2(H2O)4][NO3]4.H2O and [Zn2(L-H)2Cl2].2EtOH are reported. The cobalt(II) in [Co(LH)2(NO3)4] displays distorted octahedral geometry, with the two protonated pyridyl-pyrazole ligands coordinated through their pyrazole nitrogen atoms in a trans-orientation; the remaining four coordination sites are occupied by nitrate anions. Two internal hydrogen bonds occur between each pyrazole NH and the oxygens of adjacent coordinated nitrato ligands. Short intermolecular hydrogen bonds also occur between the two pyridinium hydrogens and bound nitrate ligands on different molecules to yield a two-dimensional hydrogen-bonded array. Two of these arrays interpenetrate to form an extended two dimensional layer; such layers stack throughout the crystal structure. A second product of type [Co(LH)2(H2O)4][NO3]4.H2O exists as two crystallographically independent, but chemically similar, forms. In each form, the two protonated pyridyl-pyrazole ligands occupy trans positions about the cobalt, with the remaining four coordination sites being filled by water molecules to yield a distorted octahedral coordination geometry. Intramolecular hydrogen-bonding is observed between the two non-coordinated pyrazoyl nitrogen atoms and bound water oxygen atoms. The third complex, [Zn2(L-H)2Cl2].2EtOH, contains dimer units consisting of two zinc(II) ions bridged by two pyrazoylate groups in which the coordination geometry of each zinc approximates a tetrahedron. Each zinc is bound to two deprotonated pyridine-pyrazole ligands (L-H), one pyridyl group (from a different dimeric unit) and one chloro ligand. Each pyridyl nitrogen thus connects each of these zinc dimers to an adjacent dimer unit, forming a three-dimensional network containing small voids. The latter are occupied by ethanol molecules which form hydrogen bonds to the chloro ligands.     

Thermal analysis of some metal benzohydroxamates

The preparation and thermal analysis of metal chelates of benzohydroxarnic acid (BHA) with Al(III), Cd(II), Co(II), Cu(II) (two compounds), Fe(III), La(III), Pb(II), Mn(II), Ni(II), U(VI) and Zn(II) is discussed. The Al(III), La(III), Pb(II) and Mn(II) chelates are new compounds. DTA and TGA curves of the chelates and of BHA are presented, and the heats of decomposition of the chelates are estimated.     

OptiDock: virtual HTS of combinatorial libraries by efficient sampling of binding modes in product space

Products from combinatorial libraries generally share a common core structure that can be exploited to improve the efficiency of virtual high-throughput screening (vHTS). In general, it is more efficient to find a method that scales with the total number of reagents (Sigma growth) rather with the number of products (Pi growth). The OptiDock methodology described herein entails selecting a diverse but representative subset of compounds that span the structural space encompassed by the full library. These compounds are docked individually using the FlexX program (Rarey, M.; Kramer, B.; Lengauer, T.; Klebe, G. J. Mol. Biol. 1995, 251, 470-489) to define distinct docking modes in terms of reference placements for combinatorial core atoms. Thereafter, substituents in R-cores (consisting of the core structure substituted at a single variation site) are docked, keeping the core atoms fixed at the coordinates dictated by each reference placement. Interaction energies are calculated for each docked R-core with respect to the target protein, and energies for whole compounds are calculated by finding the reference core placement for which the sum of corresponding R-core energies is most negative. The use of diverse whole compounds to define binding modes is a key advantage of the protocol over other combinatorial docking programs. As a result, OptiDock returns better-scoring conformers than does serially applied FlexX. OptiDock is also better able to find a viable docked pose for each library member than are other combinatorial approaches.     

Characterization of supramolecular (H2O)18 water morphology and water-methanol (H2O)15(CH3OH)3 clusters in a novel phosphorus functionalized trimeric amino acid host

Phosphorus functionalized trimeric alanine compounds (l)- and (d)-P(CH(2)NHCH(CH(3))COOH)(3) 2 are prepared in 90% yields by the Mannich reaction of Tris(hydroxymethyl)phosphine 1 with (l)- or (d)- Alanine in aqueous media. The hydration properties of (l)-2 and (d)-2 in water and water-methanol mixtures are described. The crystal structure analysis of (l)-2.4H(2)O, reveals that the alanine molecules pack to form two-dimensional bilayers running parallel to (001). The layered structural motif depicts two closely packed monolayers of 2 each oriented with its phosphorus atoms projected at the center of the bilayer and adjacent monolayers are held together by hydrogen bonds between amine and carboxylate groups. The water bilayers are juxtaposed with the H-bonded alanine trimers leading to 18-membered (H(2)O)(18) water rings. Exposure of aqueous solution of (l)-2 and (d)-2 to methanol vapors resulted in closely packed (l)-2 and (d)-2 solvated with mixed water-methanol (H(2)O)(15)(CH(3)OH)(3) clusters. The O-O distances in the mixed methanol-water clusters of (l)-2.3H(2)O.CH(3)OH and (d)-2.3H(2)O.CH(3)OH (O-O(average) = 2.857 A) are nearly identical to the O-O distance observed in the supramolecular (H(2)O)(18) water structure (O-O(average) = 2.859 A) implying the retention of the hydrogen bonded structure in water despite the accommodation of hydrophobic methanol groups within the supramolecular (H(2)O)(15)(CH(3)OH)(3) framework. The O-O distances in (l)-2.3H(2)O.CH(3)OH and (d)-2.3H(2)O.CH(3)OH and in (H(2)O)(18) are very close to the O-O distance reported for liquid water (2.85 A).