Vibrational overtone spectroscopy, energy levels, and intensities of (CH3)3C-C≡C-H

The vibrational overtone spectra of the acetylenic (Δυ = 4, 5) and methyl (Δυ = 5, 6) C-H stretch transitions of tert-butyl acetylene [(CH(3))(3)C-C≡C-H] were obtained using the phase shift cavity ring down (PS-CRD) technique at 295 K. The C-H stretch fundamental and overtone absorptions of the acetylenic (Δυ = 2 and 3) and methyl (Δυ = 2-4) C-H bonds have been obtained using a Fourier transform infrared and near-infrared spectrophotometer. Harmonic frequency ω(ν(1)) and anharmonicities x(ν(1)) and x(ν(1), ν(24)) are reported for the acetylenic C-H bond. Molecular orbital calculations of geometry and vibrational frequencies were performed. A harmonically coupled anharmonic oscillator (HCAO) model was used to determine the overtone energy levels and assign the absorption bands to vibrational transitions of methyl C-H bonds. Band strength values were obtained experimentally and compared with intensities calculated in terms of the HCAO model where only the C-H modes are considered. No adjustable parameters were used to get order of magnitude agreement with experimental intensities for all pure local mode C-H transitions.     

Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.     

Polycondensed heterocycles. I. Synthesis of 11-oxo-5H, 11H-pyrrolo[2,1-c][1,4]benzothiazepine,Derivative of a novel ring system

The synthesis of the title compound 4 by cyclization of 1-(2-ethoxycarbonylthiobenzyl)pyrrole 9 , prepared by treating with ethyl chloroformate the 1-(2-mercaptobenzyl)pyrrole 7 previously obtained by debenzylation of 1-(2-benzylthiobenzyl)pyrrrole 6 , failed. On the other hand 4 was successfully synthesized by intramolecular cyclization of 1-(2-mercaptobenzyl)pyrrole-2-carboxylic acid 15 by DMAP -catalyzed DCC method. The pyrrole 6 and 1-(2-benzylthiobenzyl)pyrrole-2-carboxaldehyde 11 were useful as starting materials to obtain 1-(2-benzylthiobenzyl)pyrrole-2-carbonitrile 13 , which was hydrolyzed to corresponding amide 16 . Debenzylation of 16 afforded 1-(2-mercaptobenzyl)pyrrole-2-carboxyamide 17 , whose hydrolysis led to required acid 15 .     

Practical asymmetric synthesis of alpha-branched 2-piperazinylbenzylamines by 1,2-additions of organometallic reagents to N-tert-butanesulfinyl imines

[reaction: see text] 2-[4-(tert-Butoxycarbonyl)piperazinyl]benzylidene-tert-butanesulfinamides underwent nucleophilic 1,2-addition with different organometallic reagents to give highly diastereomerically enriched adducts. X-ray crystallography of the resulting alpha-branched N-Boc-2-piperazinylbenzyl-tert-butanesulfinamides confirms different mechanisms depending on the organometallic reagent used. Differential deprotection of the N-Boc and the tert-butanesulfinamides was investigated, and the dehydration byproducts have been identified and characterized. To avoid the formation of byproducts in the acidic deprotection step, the N-tert-butanesulfinamide group was converted to the corresponding N-tert-butanesulfonamide (Bus), which allowed for clean orthogonal deprotection. The efficient synthesis and deprotection of the N-Boc-2-piperazinylbenzyl-tert-butanesulfinamides herein described constitutes an attractive method for extensive structure-activity studies in the search for novel ligands of the human melanocortin 4 receptor.     

Study of migration of active components of phosphorescent oxygen sensors for food packaging applications

A study of migration of the active components of oxygen sensors into food is presented. Six types of sensors, based on different oxygen sensitive dyes (two metalloporphyrins and one ruthenium dye), polymers (polystyrene and polysulfone) and support materials, were exposed to a number of standard ‘food simulants’ recommended by FDA/EU guidelines and then assayed for migration or sensor components and changes in oxygen calibration. Both metalloporphyrin sensor dyes leached only in olive oil and in 95% ethanol (used as a positive control), at maximum levels of 19.22 μg/dm² for PtOEPK and 113.96 μg/dm² for PtTFPP. The RuDPP dye showed maximum leaching in 95% ethanol (25.19 μg/dm²) while also migrating in an acidic aqueous simulant. Planar supports such as polyester tended to enhance the stability of the sensor. Migration of the styrene monomer from the polystyrene encapsulation medium was concluded to be low enough to be insignificant. Migration of sensor components was shown to correlate with the changes in sensor response to oxygen. Based on these results, sensor combinations were ranked on the basis of their resistance to leaching and their general stability, safety and suitability for use on a large scale in packaged foods and related food applications was proven.     

The use of novel water-in-oil microemulsions in microemulsion electrokinetic chromatography

We describe the novel use of water-in-oil (W/O) microemulsions to achieve unique separations in microemulsion electrokinetic chromatography (MEEKC). The choice and concentration of the buffer type, surfactant and co-surfactant were all examined and optimized. Separations of a range of neutral and acidic analytes was shown to be markedly different to that obtained by (oil-in-water) O/W MEEKC. Neutral solutes are separated by virtue of their solubility (log P) values in O/W MEEKC with the more water-insoluble solutes migrating last. This separation process does not occur in W/O, as neutral solutes are not separated in order of log P.     

Is it safe to have a laboratory test?

A recent US Institute of Medicine report indicated that up to 98,000 deaths and more than 1 million injuries occur each year in the United States due to medical errors. These include diagnostic errors, such as an error or delay in diagnosis, failure to employ indicated tests and the use of outmoded tests. Laboratory tests provide up to 80% of the information used by physicians to make important medical decisions, therefore it is important to determine how often laboratory testing mistakes occur, whether they cause patient harm, where they are most likely to occur in the testing process, and how to prevent them from occurring. A review of the literature and a US Quality Institute Conference in 2003 indicates that errors in laboratory medicine occur most often in the pre-analytical and post-analytical steps in the testing process, but most of the quality improvement efforts focus on improving the analytical process. Measures must be developed and employed to reduce the potential for mistakes in laboratory medicine, including better indicators for the quality of laboratory service. Users of laboratory services must be linked with the laboratorys information system to assist them with decisions about test ordering, patient preparation, and test interpretation. Quality assessment efforts need to be expanded beyond external quality assessment programs to encompass the detection of non-analytical mistakes and improving communication between the users of and providers of laboratory services. The actual number of mistakes in laboratory testing is not fully recognized, because no widespread process is in place to either determine how often mistakes occur or to systematically eliminate sources of error. We also tend to focus on mistakes that result in adverse events, not the near misses that cause no observable harm. The users of laboratory services must become aware of where testing mistakes can occur and actively participate in designing processes to prevent mistakes. Most importantly, healthcare institutions need to adopt a culture of safety, which is implemented at all levels of the organization. This includes establishing closer links between providers of laboratory services and others in the healthcare delivery system. This was the theme of a 2003 Quality Institute Conference aimed at making the laboratory a key partner in patient safety. Plans to create a permanent public–private partnership, called the Institute for Quality in Laboratory Medicine, whose mission is to promote improvements in the use of laboratory tests and laboratory services are underway.Presented at the 9th Conference on Quality in the Spotlight, 18–19 March 2004, Antwerp, Belgium.