Ueber die Titration der Schwefels?ure mit Benzidinchlorhydrat

Zusammenfassung In Vorstehendem wurde zunächst die Ausführung der von einem von uns ausgearbeiteten Schwefelsäuretitration mittelst Benzidinchlorhydrats nochmals genau beschrieben, sodann wurden die Bedingungen festgestellt, unter denen verschiedene Schwefelsäuremengen am genauesten zu bestimmen waren. Es hat sich dabei herausgestellt, dass die Schwefelsäure bis zu 0,01g H₂SO₄ herunter nach der beshriebenen Methode auf 1–2 genau bestimmt werden kann. Die Anwendung der Methode auf verschiedene Fälle (Ammoniumsulfat, Alaun, Zinksulfat-heptahydrat, Mohr'sches Salz, Mangansulfat-tetrahydrat), wobei die Metalle in einigen Fällen vorher ausgefällt wurden, bestätigten die zuvor festgestellten Regeln; ausserdem wurde gezeigt, dass beim Ausfällen von Zink, Eisen und Mangan nach dem angegebenen Verfahren Schwefelsäure nicht mitgerissen wird. Die Zeit, welche eine derartige Bestimmung, auch wenn die beschriebenen Ausfällungen vorgenommen werden müssen, bei einiger Uebung erfordert, ist sehr kurz, weil alles Auswaschen und so weiter in Fortfall kommt, so dass auch hier ein Vortheil gegenüber dem gewichtsanalytischen Verfahren vorhanden ist.     

Synthesen von Xyluron- und Riburonsäurederivaten

Zusammenfassung Durch acylierende Dehydratisierung von 1,2-Isopropyliden-d-xylo-und-d-ribo-pentodialdo-furanoseoxim bzw. aus Furanuronsäureestern und-amiden werden über eine Reihe von Zwischenstufen verschiedene 3-O-Acyl-pentofuranuronsäurenitrile synthetisiert und deren Reaktionen untersucht.

---

Synthesis of xyluronic and riburonic acid derivatives

Various 3-O-acyl-pentofuranurononitrils were synthesized by acylating dehydration of 1,2-isopropylidene-d-xylo- andd-ribo-pentodialdo-furanose oximes, or pentofuranuronic acids via intermediates. Their reactions were investigated.

---

---

Mit 1 Abbildung

---

Aus den DissertationenH. W. Oberwalder (1970) undE. Wildschek (1967), Technische Hochschule in Graz.     

Über die Herstellung von Äther der enantio-14, 15-Dinorlabdan-Reihe aus Eperusäure

The Conversion of Eperuic Acid into Ethers of the enantio-14, 15-Dinorlabdane Series 5 and 6 are strongly odiferous substances of the ambra-type. Their enantiomers 7 and 8 , hitherto unknown, have been synthesized from eperuic acid (4) and their olfactory properties compared with those of 5 and 6 . 4 was esterified by CH₂N₂ and dehydrogenated with (C₆H₅Se)₂/H₂O₂ to the α,β-unsaturated ester 9 (61%). Oxidation by KMnO₄ in acetone yielded the ketone 3 (60%). Epoxidation followed by treatment with acid converted 3 into the acetals 7 (61%) and 8 (14%). 7 and 8 differ from 5 and 6 in odor intensity, and 6 and 8 show slightly different odor quality.     

Photoinduced Electron Transfer Reactions of alpha-Cyclopropyl- and alpha-Epoxy Ketones. Tandem Fragmentation-Cyclization to Bi-, Tri-, and Spirocyclic Ketones

Reductive photoinduced electron transfer (PET) reactions have been performed with various bicyclic alpha-cyclopropyl-substituted ketones and tertiary amines. The reaction resulted in a regioselective cleavage of one cyclopropyl bond under formation of an exocyclic radical with an endocyclic enolate unit. In the case of bicyclic ketones with an unsaturated side chain, various bicyclic, spirocyclic, and tricyclic products are accessible via radical cyclization, depending on the position of the alkenyl substituent. In addition to triethylamine, N-silylated amines have also been used as electron donors, leading to a variety of compounds, among them are silylated fragmentation products, indicating that a proton is transferred from not only the amine radical cation but also the cationic silyl group. The intramolecular Paternó-Büchi reaction has also been studied for cyclopropane derivatives of the jasmone type leading to tetracyclic oxetanes. Finally, alpha-epoxy-substituted ketones have been investigated under PET conditions, yielding ring-opened products.     

Mass spectrometric analysis of ceramic components for solid oxide fuel cells

For the determination of trace impurities in ceramic components of solid oxide fuel cells (SOFCs), some mass spectrometric methods have been applied such as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). Due to a lack of suitable standard reference materials for quantifying of analytical results on La _x Sr _y MnO₃ cathode material a matrix-matched synthetic standard-high purity initial compounds doped with trace elements-was prepared in order to determine the relative sensitivity coefficients in SSMS and LA-ICP-MS. Radiofrequency glow discharge mass spectrometry (rf-GDMS) was developed for trace analysis and depth profiling of thick non-conducting layers. Surface analytical techniques, such as secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS), were used to determine the element distribution on surfaces (homogeneity) and the surface contaminants of SOFC ceramic layers.Dedicated to Professor Dr. rer. nat. Hubertus Nickel on the occasion of his 65th birthday     

Photochemische Reaktionen. 107. Mitteilung. Zur Photochemie offenkettiger 2,6-bzw. 2,7-Dien-Carbonylverbindungen

The Photochemistry of Open-Chained 2,6- or 2,7-Dien-Carbonyl Compounds On ¹n, π*-excitation (λ > 347 nm) citral (5) and the methyl ketone 10 isomerize to compounds A (7, 19) and B (6, 20) , whereas the phenyl ketone 11 changes into the isomer 24 of type E. Evidence is given that the conversions to A and B may arise from the ³n, π*-state of the 2,6-diene-carbonyl compounds. On ¹n, π*-excitation (λ = 254 nm) 5 and 10 yield the isomers A (7, 19) and D (18, 22) , but no products of type B. Furthermore, conversion of 10 to the isomer 21 of type C is observed. Selective ¹n, π*-excitation (λ = 254 nm) as well as selective ¹n, π*-excitation (λ > 347 nm) of the 2,7-diene-carbonyl compounds 12 and 13 give rise to isomerization to the compounds F (25, 28) , exclusively. The intramolecular [2 + 2]-photocycloadditions are shown to be triplet processes. UV.-irradiation (λ > 280 nm) of compounds F (25, 28) furnishes the isomeric products G (26, 29) which photoisomerize to oxetanes of type H (27, 30).     

Chemischer Transport von Eisensulfid. II. Experimentelle Ergebnisse beim Transport von FeSx mit Jod

Chemical Transport of Iron Sulphide. II. Experimental Results on the Transport of FeS_x with Iodine It is possible to deposite monocrystals of iron sulphide FeS_x by means of CTR method using iodine as transport agent. The presence of sufficient, high sulfur partial pressures is the most important condition for the FeS_x being transported, in other words: x must be equal or greater than approximately 1.04. The transport velocity and the shape of the deposited crystals depend on temperature, amount of iodine, and composition of the original material. The expected differences between the composition of the deposited solid and that of the residue can be verified experimentally.     

Oxydation von Allylalkoholen mit Blei(IV)-acetat

Lead tetraacetate (LTA) oxidation of the allylic alcohols 1, 10, 14 and 19 leads to the formation of the epoxides 2, 11, 15 and 20 , products of a novel internal addition reaction of the electron deficient alcohol oxygen to the allylic double bond. In some cases ( 10, 14 ) the formation of a new type of acetoxylated enolethers ( 12, 16 ) is observed. The LTA oxidation of the allylic dienols 21 and 29 gives rise to the formation of the epoxyacetates 25 and 33 , products of a similar internal addition reaction. Furthermore, a variety of cyclization products ( 22, 23, 24, 26, 30, 31, 32 and 34 ) has been isolated whose formation requires an isomerisation of the allylic trans double bond to a cis one.     

Antimalarial activity of n(6)-substituted adenosine derivatives (part 2)

We have investigated the in vitro antimalarial activity of a new series of adenosine derivatives. The results show that N(6)-(1-naphthylmethyl)-5'-deoxy-5'-(amido)adenosines as well as N(6)-(4-phenylbenzyl)-5'-deoxy-5'-(amido)adenosines display significant activity against the malaria-causing parasites, with the sterically demanding bisubstituted species reported being active in most cases in the low-micromolar range. The novel compounds with unusual substitution pattern were obtained applying an efficient convergent polymer-assisted solution-phase (cPASP) synthesis protocol. Thus, we were able to prepare a series of substituted derivatives in parallel that would have been difficult to synthesize by standard techniques. The scope and limitations of the synthetic methodology are discussed.     

X‐ray investigations of bicyclic α‐methylene‐δ‐valerolactones. V. (4aS,7R,8aR)‐7‐Isopropenyl‐4a‐methyl‐3‐methyleneperhydrochromen‐2‐one

The title compound, C₁₄H₂₀O₂, adopts a conformation in which the δ‐valerolactone and cyclohexane rings are almost coplanar with one another. The γ‐methyl substituent occupies an axial position with respect to the cyclohexane ring. The δ‐valerolactone moiety adopts an envelope arrangement, while the cyclohexane ring exists in a chair conformation.