Group additive values for the gas phase standard enthalpy of formation of hydrocarbons and hydrocarbon radicals

A complete and consistent set of 95 Benson group additive values (GAV) for the standard enthalpy of formation of hydrocarbons and hydrocarbon radicals at 298 K and 1 bar is derived from an extensive and accurate database of 233 ab initio standard enthalpies of formation, calculated at the CBS-QB3 level of theory. The accuracy of the database was further improved by adding newly determined bond additive corrections (BAC) to the CBS-QB3 enthalpies. The mean absolute deviation (MAD) for a training set of 51 hydrocarbons is better than 2 kJ mol(-1). GAVs for 16 hydrocarbon groups, i.e., C(C(d))(3)(C), C-(C(d))(4), C-(C(t))(C(d))(C)(2), C-(C(t))(C(d))(2)(C), C-(C(t))(C(d))(3), C-(C(t))(2)(C)(2), C-(C(t))(2)(C(d))(C), C-(C(t))(2)(C(d))(2), C-(C(t))(3)(C), C-(C(t))(3)(C(d)), C-(C(t))(4), C-(C(b))(C(d))(C)(H), C-(C(b))(C(t))(H)(2), C-(C(b))(C(t))(C)(H), C-(C(b))(C(t))(C)(2), C(d)-(C(b))(C(t)), for 25 hydrocarbon radical groups, and several ring strain corrections (RSC) are determined for the first time. The new parameters significantly extend the applicability of Benson's group additivity method. The extensive database allowed an evaluation of previously proposed methods to account for non-next-nearest neighbor interactions (NNI). Here, a novel consistent scheme is proposed to account for NNIs in radicals. In addition, hydrogen bond increments (HBI) are determined for the calculation of radical standard enthalpies of formation. In particular for resonance stabilized radicals, the HBI method provides an improvement over Benson's group additivity method.     

The crystal structure of bis(triphenylphosphine)-(η-cyclohexa-1,3-diene)rhenium trihydride

Bis(triphenylphosphine)(η-cyclohexa-1,3-diene)rhenium trihydride, (Ph₃P)₂(η-C₆H₈)ReH₃ (I) crystallises in the space group C2/c with cell dimensions a 22.76(2), b 10.14(1) c 29.813(6) Å, β 97.69(8)°. The final refinement of 126 variables using 1580 non-zero reflections resulted in a final R value of 0.064. In spite of uncertainties in some of the atomic positions, the structure of I is compatible with a trihydrido diene compound with a distorted pentagonal bipyramidal configuration, rather than with a dihydrido cyclohexenyl compound having an “agostic” CH ? Re interaction. The factors which govern the structure of the complexes (Ph₃P)₂(η-1,3-diene)ReH₃ are discussed.     

Poly(vinyl chloride) stabilization with organo-tin compounds: Part VI—The behavior of dibutyltin dilaurate

The reaction between dibutyltin dilaurate (DBTL) and chloro-4-hexene-2 (containing its isomer chloro-2-hexene-3) as a model compound for the allylic chlorine atom in poly(vinyl chloride) has been studied in dichlorobutane solution at 80°C. The reactions observed—elimination of HCl to give hexadiene and substitution of the laurate group to give hexenyl laurate—are believed to obey E2 and SN2 mechanisms through a common intermediate carbocation, with a rather low selectivity towards the substitution owing to the associated structure of the DBTL. The kinetics are complex because of the complex nature of the exchange reaction between DBTL and Bu₂SnCl₂. A reverse reaction between the hexenyl laurate and the organo-tin chloride is proposed to explain the limitation of the substitution reaction.     

Direct optical emission spectroscopy of liquid analytes using an electrolyte as a cathode discharge source (ELCAD) integrated on a micro-fluidic chip

Atomic emission detection of metallic species in aqueous solutions has been performed using a miniaturised plasma created within a planar, glass micro-fluidic chip. Detection was achieved using an Electrolyte as a Cathode Discharge source (ELCAD) in which the sample solution itself is used as the cathode for the discharge. To realise the ELCAD technique within a micro-fluidic device, a parallel liquid-gas flow was set up in a micro-channel and a glow discharge ignited between the flowing liquid sample surface and a metal wire anode. The detection of copper and sodium was achieved, using atmospheric pressure air as a carrier gas, by observation of atomic emission lines of copper at 324 nm, 327 nm, 511 nm, 515 nm and 522 nm and an atomic emission line of sodium at 589 nm using a commercially available miniaturised spectrometer. A total electrical power of less than 70 mW was required to sustain the discharge. A semi-quantitative, absolute detection limit of 17 nmol s(-1) was obtained for sodium with a sample flow rate of 100 microL min(-1) and an integration time of 100 ms in air at atmospheric pressure. The volume required for such detection is approximately 170 nL. Further analysis was performed with an Echelle spectrometer using both argon and air as a carrier gas. The geometry and flow rates used demonstrate the feasibility of integrating such micro-plasmas into other micro-fluidic devices, such as miniaturised CE devices, as a method of detection. The potential for using such micro-plasmas within highly portable miniaturised systems and mu-TAS devices is presented and discussed.     

A Three-Dimensional Two-Phase Model for Thermal Plasma Chemical Vapor Deposition with Liquid Feedstock Injection

In this paper, a comprehensive model for thermal plasma chemical vapor deposition (TPCVD) with liquid feedstock injection is documented. The gas flow is assumed to be steady, of a single temperature. Radiation and charged species contributions are excluded, but extensive homogeneous and heterogeneous chemistry is included. The liquid phase is traced by considering individual droplets. Discussion on the model's application to diamond production from acetone in a hydrogen–argon plasma is included. The major conclusions are: (1) Liquid injection possesses a capability to deliver the hydrocarbon precursor directly onto the deposition target. (2) For the case of complete evaporation of the droplet before reaching the substrate, the deposition rate is similar to that obtained with gaseous precursors. (3) The computational results compare well with experimental data. The modeling results can be used to optimize the injection parameters with regard to the deposition rate.     

Lamellar Organo-Bridged Silicones

The acid-hydrolysis of an organo-bridged bisdiethoxysilylated molecular precursor bearing urea groups, (EtO)₂MeSi(CH₂)₃NHCONH(CH₂)₁₂NHCONH(CH₂)₃SiMe(OEt)₂, has been performed in pure aqueous medium. Scanning electron microscopy (SEM) analysis of the resulting insoluble solid revealed plate-like forms with a lamellar structure as determined by powder X-ray diffraction (PXRD) studies with a sharp peak at 28.5 Å. The solid state ²⁹Si MAS-NMR spectrum of this bridged siloxane hybrid is consistent with a moderately condensed material with complete preservation of the Si–C bonds throughout the hybrid network. In comparison, the classical sol–gel hydrolysis-condensation of the molecular precursor in ethanol with stoichiometric amount of water and fluoride anion as catalyst produced an amorphous featureless solid.     

Etude par diffraction X et microscopie electronique du système CaTiO3---Ca2Fe2O5

In order to check the extended defect model previously proposed for the nonstoichiometric perovskite A_nM_nO_3n−1 (n 2), the Ca₂Ti_2−2xFe_2xO_6−x solid solution has been studied by means of X-ray diffraction and electron microscope investigations. The results show the existence of a continuous evolution (0 x 1) with two different regions. Close to the CaTiO₃ composition (0 x 0.40) the oxygen vacancies seem to be randomly distributed and the symmetry remains pseudocubic. In the composition range 0.55 x 1, the electron microscope patterns show an ordering of the defects: the oxygen vacancies are ordered in the (0k0) planes in strings parallel to the [101] direction. It is concluded from these observations that perpendicular to the Oy direction isolated planes of tetrahedra arranged in rows separate planes of corner-linked octahedra. The n = 2; 2.5; 3, et 4 terms of the A_nM_nO_3n−1 series have been identified. C.S. planes characteristic of classical nonstoichiometric oxides with small cations do not appear: instead, tetrahedra planes succeed to the previous octahedra planes as the degree of nonstoichiometry increases.

Résumé

Afin de vérifier le modèle de non-stoechiométrie proposé dans un travail précédent pour les perovskites lacunaires A_nM_nO_3n−1 (n 2), la solution solide Ca₂Ti_2−2xFe_2xO_6−x a été, étudiée par diffraction X et microscopie électronique. Les résultats montrent l'existence d'une évolution continue (0 x 1) avec deux domaines différents. Pour les compositions proches de CaTiO₃ (0 x 0.40), les lacunes oxygénées semblent être distribuées statistiquement et la symétrie demeure pseudocubique. Dans le domaine de compositions 0.55 x 1, les images de microscopie électronique montrent un ordre des défauts: les lacunes d'oxygène sont ordonnées dans les plans (0k0) en rangées parallèles à la direction [101]. Ces observations ont permis de conclure que perpendiculairement à la direction Oy des plans isolés de files de tétraèdres séparent des plans d'octaèdres liés par leurs sommets. Les termes n = 2; 2.5; 3 et 4 des séries A_nM_nO_3n−1 ont été identifiés. Des plans de cisaillement rencontrés dans les oxydes non-stoechiométriques classiques de petits cations n'ont pas été mis en évidence: par contre, des plans de tétraèdres se substituent aux plans d'octaèdres initiaux lorsque le degré de non-stoechiométrie augmente.