Correlation between excess adsorption data measured for solvent mixture/adsorbent systems and RM values obtained for different solutes chromatographed in binary mobile phases

This paper concerns the application of excess adsorption isotherms, measured for solvent mixture/adsorbent systems, to the characterization of TLC data. For this purpose the excess adsorption isotherms for three liquid mixtures: cyclohexane/ benzene, benzene/acetone, and carbon tetrachloride/ethyl acetate on silica gel at 20°C have been measured. These mixtures have been used as binary mobile phases in TLC measurements. It has been shown for a given solute in binary mobile phase that the quantity R_M is a simple function of the excess adsorption. Parameters of this function have been used to characterize chromatographic systems with binary mobile phases.     

2,2,4,4‐Tetra‐tert‐butyl‐1,3,5,2,4‐benzotrioxadisilepine‐7‐carbaldehyde

The mol­ecule of the title compound, C₂₃H₄₀O₄Si₂, features an approximate non‐crystallographic C₂ symmetry axis. The aldehyde group is disordered over two positions with similar occupancies. The geometry of the isolated mol­ecule was studied by ab initio quantum mechanical calculations employing a mol­ecular orbital Hartree–Fock method. The calculations reproduce well the equilibrium geometry but slightly overestimate the value of the Si—O bond lengths of the trioxadisilepine ring.     

Concentration and vertical distribution of plutonium and americium in Italian mosses and lichens

The plutonium and americium concentration and vertical distribution in some Italian mosses and lichens have been determined. The^239,240Pu,²³⁸Pu and²⁴¹Am concentration ranges in tree trunk lichens 0.83–1.87, 0.052–0.154 and 0.180–0.770 Bq/kg, respectively. The corresponding values in tree mosses are higher and more scattered ranging from 0.321 to 4.96, from 0.029 to 0.171 and from 0.200 to 1.93 Bq/kg. The mean²³⁸Pu/^239,240Pu and²⁴¹Am/^239,240Pu ratios are 0.088±0.037 and 0.38±0.13 in lichens and 0.091±0.072 and 0.54±0.16 in tree mosses. The Pu and Am concentrations are relatively low in terrestrial mosses. The^239,240Pu,²³⁸Pu and²⁴¹Am vertical distributions in a terrestrial moss core (Neckera Crispa) collected near Urbino (central Italy) show an exponential decrease with the height. On the contrary the²⁴¹Am vertical distribution in another terrestrial moss core (Sphagnum Compactum) collected in the Alps (northern Italy) shows an interesting peak at 16 cm which corresponds to the deposition of fallout from the nuclear weapon tests in 1960's. The²⁴¹Am movement upward and downward in the moss core is also studied. The results show once again that both mosses and lichens are very effective accumulators of Pu and Am and that they can be used as good biological indicators of the radionuclide airbome pollution from nuclear facilities and nuclear weapon tests. They can play a very impotant role in cycling naturally or artificially enhanced radionuclides in the atmosphere over long time scales.     

Construction of 4D-QSAR Models for Use in the Design of Novel p38-MAPK Inhibitors

The p38-mitogen-activated protein kinase (p38-MAPK) plays a key role in lipopolysaccharide-induced tumor necrosis factor-alpha (TNF-alpha) and interleukin-1 (IL-1) release during the inflammatory process, emerging as an attractive target for new anti-inflammatory agents. Four-dimensional quantitative structure-activity relationship (4D-QSAR) analysis [Hopfinger et al., J. Am. Chem. Soc., 119 (1997) 10509] was applied to a series of 33 (a training set of 28 and a test set of 5) pyridinyl-imidazole and pyrimidinyl-imidazole inhibitors of p38-MAPK, with IC50 ranging from 0.11 to 2100 nM [Liverton et al., J. Med. Chem., 42 (1999) 2180]. Five thousand conformations of each analogue were sampled from a molecular dynamics simulation (MDS) during 50 ps at a constant temperature of 303 K. Each conformation was placed in a 2 angstroms grid cell lattice for each of three trial alignments. 4D-QSAR models were constructed by genetic algorithm (GA) optimization and partial least squares (PLS) fitting, and evaluated by leave-one-out cross-validation technique. In the best models, with three to six terms, the adjusted cross-validated squared correlation coefficients, Q2adj, ranged from 0.67 to 0.85. Model D (Q2adj = 0.84) was identified as the most robust model from alignment 1, and it is representative of the other best models. This model encompasses new molecular regions as containing pharmacophore sites, such as the amino-benzyl moiety of pyrimidine analogs and the N1-substituent in the imidazole ring. These regions of the ligands should be further explored to identify better anti-inflammatory inhibitors of p38-MAPK.     

N,N'-ethylenebis(pyridoxylideneiminato) and N,N'-ethylenebis(pyridoxylaminato): synthesis, characterization, potentiometric, spectroscopic, and DFT studies of their vanadium(IV) and vanadium(V) complexes

The Schiff base N,N'-ethylenebis(pyridoxylideneiminato) (H(2)pyr(2)en, 1) was synthesized by reaction of pyridoxal with ethylenediamine; reduction of H(2)pyr(2)en with NaBH(4) yielded the reduced Schiff base N,N'-ethylenebis(pyridoxylaminato) (H(2)Rpyr(2)en, 2); their crystal structures were determined by X-ray diffraction. The totally protonated forms of 1 and 2 correspond to H(6)L(4+), and all protonation constants were determined by pH-potentiometric and (1)H NMR titrations. Several vanadium(IV) and vanadium(V) complexes of these and other related ligands were prepared and characterized in solution and in the solid state. The X-ray crystal structure of [V(V)O(2)(HRpyr(2)en)] shows the metal in a distorted octahedral geometry, with the ligand coordinated through the N-amine and O-phenolato moieties, with one of the pyridine-N atoms protonated. Crystals of [(V(V)O(2))(2)(pyren)(2)].2 H(2)O were obtained from solutions containing H(2)pyr(2)en and oxovanadium(IV), where Hpyren is the "half" Schiff base of pyridoxal and ethylenediamine. The complexation of V(IV)O(2+) and V(V)O(2) (+) with H(2)pyr(2)en, H(2)Rpyr(2)en and pyridoxamine in aqueous solution were studied by pH-potentiometry, UV/Vis absorption spectrophotometry, as well as by EPR spectroscopy for the V(IV)O systems and (1)H and (51)V NMR spectroscopy for the V(V)O(2) systems. Very significant differences in the metal-binding abilities of the ligands were found. Both 1 and 2 act as tetradentate ligands. H(2)Rpyr(2)en is stable to hydrolysis and several isomers form in solution, namely cis-trans type complexes with V(IV)O, and alpha-cis- and beta-cis-type complexes with V(V)O(2). The pyridinium-N atoms of the pyridoxal rings do not take part in the coordination but are involved in acid-base reactions that affect the number, type, and relative amount of the isomers of the V(IV)O-H(2)Rpyr(2)en and V(V)O(2)-H(2)Rpyr(2)en complexes present in solution. DFT calculations were carried out and support the formation and identification of the isomers detected by EPR or NMR spectroscopy, and the strong equatorial and axial binding of the O-phenolato in V(IV)O and V(V)O(2) complexes. Moreover, the DFT calculations done for the [V(IV)O(H(2)Rpyr(2)en)] system indicate that for almost all complexes the presence of a sixth equatorial or axial H(2)O ligand leads to much more stable compounds.     

Highly stereoselective and efficient total synthesis of (+)-laurencin

A highly stereoselective and efficient asymmetric total synthesis of (+)-laurencin (1) has been accomplished from the known oxazolidinone 5 in 15 steps. The route features an efficient internal alkylation to form oxocene 3 from 4 and a novel use of acetonitrile anion as a two-carbon acetaldehyde equivalent for direct synthesis of ketone 2 from alpha-alkoxy amide 3.     

As, Bi, Sb and Sn determination in atmospheric particulate matter by direct solid sampling-hydride generation-electrothermal atomic absorption spectrometry

A novel, rapid and simple method by hydride generation-electrothermal atomic absorption spectrometry (HG-ETAAS) after direct As, Bi, Sb and Sn hydrides generation from untreated filters of atmospheric particulate matter (PM₁₀ and PM_2.5) was optimised. PM₁₀ and PM_2.5 were not subjected to any pre-treatment: circular portions between 0.28 and 6.28 cm² were directly placed into the reaction vessel of a batch mode generation system. A 2⁸ × 3/64 Plackett–Burman design was used as a multivariate strategy for the evaluation of the effects of several variables affecting the hydride generation, trapping and atomisation efficiencies. Trapping temperature was the most statistically significant variable for As, Bi and Sn. Atomisation temperature was also statistically significant for Sb determination. Optimum values of significant variables were selected by using univariate optimisation approaches. An aqueous calibration method was used throughout. The developed method has been found to be precise with relative standard deviations of 6.2, 5.3, 9.1 and 7.5% for 11 determinations in a filter sample containing 0.7, 1.0, 1.4 and 1.7 μg l⁻¹ for As, Bi, Sb and Sn, respectively. Results obtained by direct solid sampling-HG-ETAAS have been found statistically comparable with those obtained after conventional method based on an acid digestion followed to ICP-MS. Absolute detection limits were 37, 15, 30, and 41 ng l⁻¹ for As, Bi, Sb and Sn, respectively. Detection limits referred to the air volume sampled (in the range of 0.020–0.050 ng m⁻³) were low enough for the determination of several hydride-forming elements from PM₁₀ and PM_2.5 samples collected in a non-polluted suburban area of A Coruña (NW Spain).     

Composition of the black crusts from the Saint Denis Basilica, France, as revealed by gas chromatography-mass spectrometry

The organic fraction of black crusts from Saint Denis Basilica, France, is composed of a complex mixture of aliphatic and aromatic compounds. These compounds were studied by two different analytical approaches: tetramethyl ammonium hydroxide (TMAH) thermochemolysis in combination with gas chromatography-mass spectrometry (GC-MS), and solvent extraction, fractionation by silica column, and identification of the fraction components by GC-MS. The first approach, feasible at the microscale level, is able to supply fairly general information on a wide range of compounds. Using the second approach, we were able to separate the complex mixture of compounds into four fractions, enabling a better identification of the extractable compounds. These compounds belong to different classes: aliphatic hydrocarbons (nalkanes, n-alkenes), aliphatic and aromatic carboxylic acids (n-fatty acids, alpha,omega-dicarboxylic acids, and benzenecarboxylic acids), polycyclic aromatic hydrocarbons (PAH), and molecular biomarkers (isoprenoid hydrocarbons, diterpenoids, and triterpenoids). With each approach, similar classes of compounds were identified, although TMAH thermochemolysis failed to identify compounds present at low concentrations in black crusts. The two proposed methodological approaches are complementary, particularly in the study of polar fractions.     

Microwave treatment of biological samples for methylmercury determination by high performance liquid chromatography-cold vapour atomic fluorescence spectrometry

A simple and rapid microwave-assisted alkaline digestion procedure was developed in combination with high performance liquid chromatography-ultraviolet post-column oxidation-cold vapour atomic fluorescence spectrometric detection for methylmercury determination in biological tissues. Since the stability of methylmercury in methanolic potassium hydroxide solution under microwave irradiation was verified, the microwave-assisted extraction procedure was optimized in terms of quantitative recovery of methylmercury and minimum time required. The alkaline extracts were subjected to clean-up steps with dichloromethane and hydrochloric acid in order to reduce matrix interferences in methylmercury determination. The effects of matrix interferences were checked by comparison of the slopes corresponding to calibration and standard addition curves. The accuracy of the method was evaluated by the analysis of two biological certified reference materials, NRC TORT-2 and BCR 463. The results obtained by the proposed method were in good agreement with the certified values of methylmercury concentration in both materials. The detection limit was 10 microg kg(-1) and the relative standard deviation was < 8% for methylmercury concentrations ranging from 0.15 to 3.0 mg kg(-1).