Semiconductor optical amplifier (SOA)-assisted Sagnac switch for designing of all-optical tri-state logic gates

Tri-state logic plays a significant role in carry free arithmetical operation. Design of all-optical scheme of three basic tri-state logical operation (NOT, AND, OR) with the help of polarization encoded semiconductor optical amplifier (SOA)-assisted Sagnac interferometric switch has been studied and investigated in this present paper. Numerical simulation is also presented, which verifies the theoretical results. Insertion loss, contrast ratio, extinction ratio, amplitude modulation, bit error rate and signal to noise ratio values have also been analyzed.     

57Fe Mössbauer spectroscopic study of nanostructured zinc ferrite

Nanosize zinc ferrite particles, prepared by nitrate method, were investigated by XRD, TEM, ⁵⁷Fe Mössbauer spectroscopy and VSM. The average particle size in this system varies from 10 to 62 nm as the sintering temperature increases from 300°C to 1,000°C. The lattice parameters in this system are almost constant at a value of ～8.41 Å. The Mössbauer spectra of all the sintered samples show a single doublet. The Mössbauer hyperfine parameters show little change with the change of sintering temperature. The doublets are ascribed to the presence of superparamagnetism in this system, which is also corroborated by the VSM measurements.     

Detection of blood flow through artery in the presence of steno-occlusive disease post liver transplantation by modeling for theatrical and detrimental environmental changes

This research intends to expand a mathematical model for studying the non-Newtonian surge of blood through a hepatic artery in the presence of steno occlusive disease post-liver transplantation. Power law liquid demonstrates the non- Newtonian character of blood. The hemodynamic conduit of the fluid is altered by the occurrence of arterial stenosis. In our study, the difficulty is resolved by applying diagnostic methods with the assistance of marginal circumstances and consequences. The outcomes are explained graphically for unusual cases for such stenosis. The study design is based on a tensorial form and converts its solution using numerical and analytical techniques. Our study outcome suitably demonstrates that the mathematical model used corroborates with the clinical scenario of the patient with hepatic disease.     

Grignard condensation routes to 1,3‐disilacyclobutane‐containing cyclolinear polycarbosilanes

Alkylene‐ and arylene‐bridged cyclolinear polycarbosilanes (CLPCS) with 1,3‐disilacyclobutane (DSCB) rings incorporated in the main chain of the polymer were prepared by polycondensation between corresponding di‐functional DSCB derivatives and di‐Grignard reagents. Well‐defined, low molecular weight (M_n = 3–5K; DP = 17–26), hexylene‐ and phenylene‐bridged CLPCS polymers were obtained without appreciable ring opening of the DSCB rings. Large exothermic peaks were observed in the DSC for these CLPCSs, which indicated, along with the IR spectra, that crosslinking occurred on heating to about 250 °C via the ring opening of the embedded, alternating, DSCB rings. Moreover, PB‐CLPCS undergoes photochemically induced crosslinking on UV irradiation to form crosslinked polycarbosilane network films. The spin‐cast, cured, films of these CLPCSs exhibit relatively low dielectric constants and promising thermal and mechanical properties for applications in electronics, for example, directly UV‐photoimprinted low‐k dielectrics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1547–1557     

Carbon nanotube-nucleobase hybrids: nanorings from uracil-modified single-walled carbon nanotubes

Single‐walled carbon nanotubes (SWCNTs) have been covalently functionalized with uracil nucleobase. The hybrids have been characterized by using complementary spectroscopic and microscopic techniques including solid‐state NMR spectroscopy. The uracil‐functionalized SWCNTs are able to self‐assemble into regular nanorings with a diameter of 50–70 nm, as observed by AFM and TEM. AFM shows that the rings do not have a consistent height and thickness, which indicates that they may be formed by separate bundles of CNTs. The simplest model for the nanoring formation likely involves two bundles of CNTs interacting with each other via uracil–uracil base‐pairing at both CNT ends. These nanorings can be envisaged for the development of advanced electronic circuits.     

SO4 2−/SnO2: Efficient,Chemoselective, and Reusable Catalyst for Acylation of Alcohols,Phenols, and Amines at Room Temperature

Abstract

SO₄ ^2?/SnO₂ was employed for the acylation of a variety of alcohols, phenols, and amines under solvent‐free conditions at room temperature. This method showed preferential selectivity for acetylation of the amino group in the presence of a hydroxyl group. The reported method is simple, mild, and environmentally viable, using several other acid anhydrides at room temperature.     

Mach-Zehnder interferometer-based tree architecture for all-optical logic and arithmetic operations

Interferometric devices for optical processing have been of great interest in recent years. Semiconductor optical amplifier (SOA)-based Mach-Zehnder interferometer (MZI) has already taken a significant role in the field of ultra-fast all-optical signal processing. Optical tree architecture (OTA) provides important contributions in optical interconnecting networks. In this communication, we have tried to exploit the advantages of both OTA and SOA-based MZI switches. We have proposed SOA-MZI-based tree architecture, a new and alternative scheme, for integrated all-optical logic and arithmetic operations. This architecture can enable one to perform all-optical processing of signals, including two input logic operations, half-adder, full-adder, full-subtractor, one-bit data comparator, etc.     

Removal of Brilliant Green from wastewater using conventional and ultrasonically prepared poly(acrylic acid) hydrogel loaded with kaolin clay: A comparative study

The present work deals with the removal of Brilliant Green dye from wastewater using a poly(acrylic acid) hydrogel composite (PAA-K hydrogel) prepared by incorporation of kaoline clay. The composite has been synthesized using ultrasound assisted polymerization process as well as the conventional process, with an objective of showing the better effectiveness of ultrasound assisted synthesis. It has been observed that the hydrogel prepared by ultrasound assisted polymerization process showed better results. The optimum conditions for the removal of dye are pH of 7, temperature of 35 °C, initial dye concentration of 30 mg/L and hydrogel loading of 1 g. The extent of removal of dye increased with an increase in the contact time and initial dye concentration. A pseudo-second-order kinetic model has been developed to explain the adsorption kinetics of dye on the PAA-K hydrogel. Thermodynamic and kinetic parameters indicate that the adsorption process is spontaneous in nature and the PAA-K hydrogel prepared by ultrasound process is a promising adsorbent compared to conventional process. The obtained adsorption data has also been fitted into commonly used adsorption isotherms and it has been found that Freundlich as well as Langmuir adsorption isotherm models fits well to the experimental results.     

Micro‐Raman investigation of nanosized zinc ferrite: effect of crystallite size and fluence of irradiation

Zinc ferrite nanoparticles of different sizes ranging from 12 to 62 nm were synthesized by using the nitrate route. These nanoparticles were irradiated by a 100 MeV oxygen beam at two fluences: 1 × 10¹³ and 5 × 10¹³ ions/cm². It was observed that modes corresponding to cubic spinel phase were retained after the irradiation in all the systems. The variation in the parameters of various modes follows phonon confinement, while this effect seems to violate in irradiated specimen. It was found that the irradiation‐induced changes in the modes F_2g(2) and F_2g(3) depend on whether the crystallite size of the pristine sample is less than, equal to or greater than the phonon confinement length, while this length is not dominant for the irradiation‐induced changes in the mode A_1g. The changes in various parameters of the modes are attributed to the combined effect of the restructuring of the chemical species and ion‐induced defects. Copyright © 2011 John Wiley & Sons, Ltd.     

Convergence analysis of sectional methods for solving breakage population balance equations-II: the cell average technique

This work presents the convergence of the cell average technique (Kumar et al. in Powder Technol 179:205–228, 2007) for solving breakage population balance equation. Similarly to our paper Kumar and Warnecke (Numerische Math, 2008) of this series, we study convergence on four different types of meshes. A second order convergence is proved for uniform, locally uniform and non-uniform smooth meshes. Finally the scheme is analyzed on random mesh and it is found that the scheme is only first order accurate. Nevertheless we obtain for locally uniform as well as for random mesh one order higher accuracy than the fixed pivot technique discussed by the authors in the first paper. All mathematical observations of convergence analysis are also validated numerically and numerical results are compared with the results of the first part.