TiO2 sol-gel derived amperometric biosensor for H2O2 on the electropolymerized phenazine methosulfate modified electrode

A novel hydrogen peroxide biosensor was developed based on the immobilization of horseradish peroxidase (HRP) in a TiO(2) sol-gel matrix on an electropolymerized phenazine methosulfate (PMS) modified electrode surface. Such membranes are of interest due to their high surface area, biological compatibility, and ease of fabrication. HRP entrapped in the TiO(2) matix was stable and retained its activity to a large extent. Cyclic voltammetry and amperometric measurements were employed to demonstrate the feasibility of electron transfer between immobilized HRP and the glassy carbon electrode via electropolymerized PMS. The influence of various experimental parameters such as operating potential, pH, temperature, and stability was investigated for optimum analytical performance. The biosensor provided a wide linear calibration range from 4.0x10(-6) M to 1.0x10(-3) M, with a detection limit of 8.0x10(-7) M at a signal-to-noise ratio of 3. The sensor retained 80% of its original activity after two months of operation.     

Simple interface for capillary electrophoresis-inductively coupled plasma atomic emission spectrometry

A simple interface has been developed to couple capillary electrophoresis (CE) to inductively coupled plasma atomic emission spectrometry (ICP-AES) for metal speciation. A concentric glass nebulizer with elongated tip is used as the CE-ICP interface. The CE capillary is the central tube of the nebulizer. A platinum wire is wrapped across the exit end of the CE capillary to provide electrical connection to the CE power supply. No sheath flow of buffer solution is needed. A simple cooling system has also been developed. A peristaltic pump circulates water through a plastic tube that encloses the section of the CE capillary between the CE instrument and the ICP spectrometer. Characteristics of the CE-ICP interface, e.g., elution time, nebulization and transport efficiency and peak broadening, versus carrier gas flow-rate have been studied. Comparisons to a previous design with the Pt electrode inserted into the end of the CE capillary are made where appropriate. The reproducibility (RSD) in ICP emission intensity of the system is <4%. Detection limits of Cr and Cu are approximately 5 ng/ml.     

Synthesis of fluorinated imines and carbodiimides from azides via aza-Wittig reaction

The Staudinger reaction of fluoroalkylazides were studied. A series of N-fluoroalkylimines were synthesized via aza-Wittig reaction of N-fluoroalkyliminophosphoranes. The N,N′-difluoroalkylated carbodiimide was also synthesized via the reaction of N-fluoroalkyliminophosphoranes with carbon dioxide or carbon disulfide.     

波束开角对多普勒测频结果的影响*

具有不同波束开角的声学多普勒测速设备未标定的测速结果存在偏差。基于水底椭圆散射模型研究了波束开角对声学多普勒测速结果的影响,对提高声学测速性能具有实际意义。水底椭圆散射模型下,足印上不同方位传播损失和散射强度存在差异,导致频谱不对称,测频结果偏小。利用不对称系数量化频谱不对称程度,若波束开角增大,方位不对称系数随之增大,测频偏差增大,推导了波束开角导致的测频偏差解析式。分析仿真和外场试验数据测频结果可知,不同多普勒频移下测频偏差和理论计算值相符,不同波束开角下实际测频偏差与理论公式计算的测频偏差均随波束开角增大而增大。     

Isolation of a carbon nanohoop with M(o)bius topology

Carbon nanohoop,a class of constrained molecular architecture consisting of linked arene units,has attracted considerable interest from both experimental and th...     

Preparation of Silica Aerogel/Resin Composites and Their Application in Dental Restorative Materials

As the most advanced aerogel material, silica aerogel has had transformative industrial impacts. However, the use of silica aerogel is currently limited to the field of thermal insulation materials, so it is urgent to expand its application into other fields. In this work, silica aerogel/resin composites were successfully prepared by combining silica aerogel with a resin matrix for dental restoration. The applications of this material in the field of dental restoration, as well as its performance, are discussed in depth. It was demonstrated that, when the ratio of the resin matrix Bis-GMA to TEGDMA was 1:1, and the content of silica aerogel with 50 μm particle size was 12.5%, the composite achieved excellent mechanical properties. The flexural strength of the silica aerogel/resin composite reached 62.9546 MPa, which was more than five times that of the pure resin. Due to the presence of the silica aerogel, the composite also demonstrated outstanding antibacterial capabilities, meeting the demand for antimicrobial properties in dental materials. This work successfully investigated the prospect of using commercially available silica aerogels in dental restorative materials; we provide an easy method for using silica aerogels as dental restorative materials, as well as a reference for their application in the field of biomedical materials.     

Time-domain analysis of second-harmonic generation of primary Lamb wave propagation in an elastic plate

Within the second-order perturbation approximation,this paper investigates the physical process of generation of the time-domain second harmonic by a primary Lamb wave waveform in an elastic plate.The present work is performed based on the preconditions that the phase velocity matching is satisfied and that the transfer of energy from the primary Lamb wave to the double frequency Lamb wave is not zero.It investigates the influences of the difference between the group velocities of the primary Lamb wave and the double frequency Lamb wave,the propagation distance and the duration of the primary Lamb wave waveform on the envelope shape of the time-domain second harmonic.It finds that the maximum magnitude of the envelope of the second-harmonic waveform can grow within some propagation distance even if the condition of group velocity matching is not satisfied.Our analyses also indicate that the maximum magnitude of the envelope of the second-harmonic waveform is kept constant beyond a specific propagation distance.Furthermore,it concludes that the integration amplitude of the time-domain second-harmonic waveform always grows with propagation distance within the second-order perturbation.The present research yields new physical insight not previously available into the effect of generation of the time-domain second harmonic by propagation of a primary Lamb wave waveform.     

Load optimal design for a primary test stand facility based on a zero-dimensional load model

In order to couple the numerical simulation of a primary test stand driver with an optimal load design, a zero-dimensional wire array load model is designed based on the Saturn load model using PSPICE, which is an upgraded version of the Simulation Program with Integrated Circuit Emphasis (SPICE) designed by the ORCAD Corporation to perform circuit simulations. This paper calculates different load parameters and discusses factors influencing the driving current curve. With appropriate driving current curves chosen, further magneto-hydrodynamic calculations are carried out and discussed to provide the best results for experiments. The suggested optimal load parameters play an important role in experimental load design.     

Spiking patterns of a hippocampus model in electric fields

We develop a model of CA3 neurons embedded in a resistive array to mimic the effects of electric fields from a new perspective. Effects of DC and sinusoidal electric fields on firing patterns in CA3 neurons are investigated in this study. The firing patterns can be switched from no firing pattern to burst or from burst to fast periodic firing pattern with the increase of DC electric field intensity. It is also found that the firing activities are sensitive to the frequency and amplitude of the sinusoidal electric field. Different phase-locking states and chaotic firing regions are observed in the parameter space of frequency and amplitude. These findings are qualitatively in accordance with the results of relevant experimental and numerical studies. It is implied that the external or endogenous electric field can modulate the neural code in the brain. Furthermore, it is helpful to develop control strategies based on electric fields to control neural diseases such as epilepsy.