湿空气扩散燃烧火焰结构特性研究

利用二维粒子成像速度仪(PIV)对钝体燃烧器中的甲烷／湿空气扩散燃烧的速度场进行测量,考察其火焰的结构特性及其内部流动状况。通过对湿空气燃烧流场与普通燃烧流场的对比分析表明,湿空气燃烧情况下,两种燃烧状态的火焰(回流燃烧火焰和中心射流主导火焰)相互转换的燃空速度比(γ)值要比普通燃烧的小;湿空气燃烧使得喷嘴后的同流空气的速度降低,空气的回流作用减弱,燃料更容易冲出回流区,火焰的稳定性能变差。     

基于NURBS的叶片全三维气动优化设计

采用NURBS对叶轮机械叶片的关键截面和基迭线进行参数化表达,该表达方法为基于现代优化算法的叶片粘性气动最优化设计提供设计变量,以实现对叶片截面和叶片基迭线弯、倾、扭、掠变形的控制。该方法编写成的叶片全三维控制模块和网格自动生成程序、CFD程序集成到商业软件iSIGHT中,构成了叶片全三维粘性气动优化设计平台。在该平台上选用ASA成功进行了某透平静叶片的全三维粘性气动最优化设计。实验结果表明通过同时改变叶片截面和叶片基迭线的方法能够有效地抑制叶片的二次流损失,因此该设计平台在叶片气动优化设计中有广阔的应用前景。     

Study of Strange Quark Mass in CFL Phase

[1]M.Alford,K.Rajagopal,and F.Wilczek,Phys.Lett.B 422 (1998) 247; Nucl.Phys.B 537 (1999) 443. [2]M.Gyulassy and L.McLerran,arXiv:nucl-th/0405013;E.V.Shuryak,arXiv:hep-ph/0405066. [3]K.Rajagopal and F.Wilczek,hep-ph/0011333. [4]M.Alford,Chris Kouvaris,and K.Rajagopal,hepph/0406137. [5]Y.Nambu and G.Jona-Lasinio,Phys.Rev.122 (1961)345. [6]R.T.Cahill and C.D.Roberts,Phys.Rev.D 32 (1985)2419. [7]R.T.Cahill and Susan M.Ganner,hep-ph/9812491. [8]A.W.Steiner,S.Reddy,and M.Prakash,Phys.Rev.D 66 (2002) 094007. [9]P.Amore,M.C.Birse,J.A.McGovern,and N.R.Walet,Phys.Rev.D 65 (2002) 074005. [10]M.Alford and K.Rajagopal,JHEP 0206 (2002) 031. [11]Xiao-Fu Li,Yu-Xin Liu,Hong-Shi Zong,and En-GuangZhao,Phys.Rev.C 58 (1998) 1195. [12]H.Reinhardt,Phys.Lett.B 244 (1990) 2. [13]Steven Weinberg,The Quantum Theory of Fields,Vol.2,Cambridge University Press,Cambridge (1996) p.348.     

Tm3+/Yb3+共掺铋碲酸盐玻璃中的高效蓝色上转换荧光

制备了高折射率Tm3+/Yb3+共掺杂铋碲酸盐玻璃,利用棱镜耦合法测量出玻璃在632.8和1550 nm波长处的折射率分别为2.0365和1.9795. 对玻璃的吸收、荧光和红外透过光谱展开了测试与分析,根据Judd-Ofelt理论对吸收光谱进行拟合,求得Tm3+的振子强度参数Ωt(t=2,4,6)分别为3.90×10-20, 2.03×10-20和9.03×10-21 cm2,并进一步计算了Tm3+在玻璃中各能级跃迁的振子强度、自发辐射跃迁概率、辐射寿命和荧光分支比等光谱参数. 在980 nm激光激发下测得强的蓝色三光子上转换和近红外双光子上转换荧光. 宽的红外透过窗口、高的折射率和强的蓝色上转换荧光表明,Tm3+/Yb3+共掺铋碲酸盐玻璃有希望成为高效的上转换发光和激光材料.     

遥感相机自动检焦技术研究

将基于图像处理的自动检焦技术应用于线阵CCD推扫成像的空间遥感相机中。图像法检焦的关键在于对焦评价函数的选取。通常对焦评价函数是在摄影目标不变的情况下得出的,而推扫成像的线阵CCD相机在任意时刻所拍摄的景物都是不同的,这就给对焦评价函数的选取增加了难度。用功率谱的方法对任意景物在空间频域进行分析表明,功率谱对于自然景物具有一定的不变性。由此建立了基于功率谱的对焦评价函数,采用小波去噪与亮度归一化相结合的图像预处理技术有效地去除了图像噪声和亮度变化对对焦精度的影响。通过对功率谱评价函数进行加权处理,提高了对焦评价函数曲线的灵敏度。仿真实验表明了所构造的对焦评价函数是可行的。     

微扫描技术对光电图像混淆噪声的影响

在分析采样理论和微扫描理论的基础上,引入了一个评价光电成像系统混淆噪声的品质因数,定量地分析了不同模式的微扫描对系统混淆噪声的改善程度。     

Magnetic M<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>@N-C as heterogeneous catalysts for the catalytic oxidation of aniline solution with sulfate radicals

Metal nanoparticles have been combined with magnet metal–organic frameworks (MOFs) to afford new materials that demonstrate an efficient catalytic degradation, high stability, and excellent reusability in areas of catalysis because of their exceptionally high surface areas and structural diversity. Magnetic M _x O _y @N-C (M = Fe, Co, Mn) nanocrystals were formed on nitrogen-doped carbon surface by using 8-hydroxyquinoline as a C/N precursor. The Co@N-C, MnO@N-C, and Fe/Fe₂O₃@N-C catalysts were characterized by X-ray diffraction (XRD), Raman, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), N₂ adsorption/desorption, and X-ray photoelectron spectroscopy (XPS). The catalytic performances of catalysts were thoroughly investigated in the oxidation of aniline solution based on sulfate radicals (SO₄ ^?.) toward Fenton-like reaction. Magnetic M _x O _y @N-C exhibits an unexpectedly high catalytic activity in the degradation of aniline in water. A high magnetic M _x O _y @N-C catalytic activity was observed after the evaluation by aniline degradation in water. Aniline degradation was found to follow the first-order kinetics, and as a result, various metals significantly affected the structures and performances of the catalysts, and their catalytic activity followed the order of Co > Mn > Fe. The nanoparticles displayed good magnetic separation under the magnetic field.

Open image in new window

Graphical Abstract ?

     

A comparative study on the morphology of P3HT:PCBM solar cells with the addition of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles by spin and rod coating methods

Our previous study presented up to 20% power conversion efficiency (PCE) enhancement of poly(3-hexylthiophene):phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM) solar cells under the Fe₃O₄ nanoparticles (NPs) self-assembly (SA) effect by spin coating. Fe₃O₄ NPs (about 11 nm hydrodynamic diameter) form a thin layer at the top interface of the light absorbing active layer, which results in the generation of PCBM rich region improving the charge transport (Zhang et al. Sol Energ Mat Sol C 160:126–133, 2017). In order to investigate the feasibility of this Fe₃O₄ NPs SA effect under large-scale production condition, a smooth rod was implemented to mimic roll-to-roll coating technique and yield active layers having about the same thickness as the spin-coated ones. Small angle neutron scattering and grazing incidence X-ray diffraction were employed finding out similar morphologies of the active layers by these two coating techniques. However, rod-coated solar cell’s PCE decreases with the addition of Fe₃O₄ NPs compared with the one without them. This is because PCBM rich region is not created at the top interface of the active layer due to the absence of Fe₃O₄ NPs, which is attributed to the weak convective flow and low diffusion rate. Moreover, in the rod-coated solar cells, the presence of Fe₃O₄ NPs causes decrease in P3HT crystallinity, thus the charge transport and the device performance. Our study confirms the role of spin coating in the Fe₃O₄ NPs SA effect and enables researchers to explore this finding in other polymer nanocomposite systems.     

吸附氢分子的振动态及熵的计算

用第一性原理方法研究了H_2在(MgO)_9及(AlN)_(12)团簇上的吸附态、振动模式及熵.分析表明,吸附体系的振动中有六个简正模式可归为氢分子的振动;由于氢分子质量很小,零点能修正对吸附能有重要影响.利用振动配分函数计算了吸附氢分子的熵,表明吸附态H_2的熵主要决定于较低的同相振动的频率,并不完全与吸附强度相关;在标准大气压下70—350 K的温度范围内,吸附H_2的熵与气态H_2的熵之间存在很好的线性关系,吸附后H_2的熵减小约10.2R.     

色散效应对聚光多结太阳电池性能的影响及优化

针对色散效应导致聚光多结太阳电池性能降低的问题,使用分布式三维等效电路模型计算高倍聚光下GaInP/GaInAs/Ge三结太阳电池的输出特性,通过分析电池各层的电压分布、暗电流分布以及横向电流分布,研究了不同电池尺寸下色散效应对电池性能影响的机理.结果表明:色散使多结太阳电池在局部区域的光生电流变得不匹配,随着电池尺寸的减小,局部区域之间失配的光生电流能够以横向电流的形式相互补偿,使电池整体的电流更加匹配,从而减小色散效应的影响.当电池芯片尺寸较大(20 mm×20 mm)时,色散主要降低电池的短路电流密度,色散光斑下电池的效率仅相当于无色散时的94%;当电池芯片尺寸减小到2 mm×2 mm时,短路电流密度与无色散时相等,但横向电阻降低了电池的填充因子.当电池芯片尺寸进一步减小到0.4 mm×0.4 mm时,色散与无色散光斑下电池的各项性能几乎没有差别,效率均约为34.5%,色散效应的影响可忽略不计.