Hybrid optoelectronic bistability in a fiber Bragg grating by use of a tunable fiber laser

We report the observation of hybrid optoelectronic bistability in a fiber Bragg grating (FBG) by use of an electro-optically tuned cw fiber laser in which another wavelength-matched FBG is employed to constitute a tunable resonant cavity. The potential application of such a device as a fiber-optic sensor is also discussed.     

蓝宝石R面上ZnO薄膜的NH3掺杂研究

以NH₃为掺杂源,利用金属有机化学气相沉积(MOCVD)系统在蓝宝石R面上生长出掺氮ZnO薄膜。通过XRD,SEM测量优化了其生长参数,在610℃和在80sccm的NH₃流量下生长出了〈1120〉单一取向的ZnO薄膜。经Hall电阻率测量,得知该薄膜呈现弱p型或高电阻率,并对其光电子能谱进行了研究。     

MOSFET辐照诱生界面陷阱形成过程的1/f噪声研究

基于界面陷阱形成的氢离子运动两步模型和反应过程的热力学平衡假设,推导了金属-氧化物-半导体-场效应晶体管(MOSFET)经历电离辐照后氧化层空穴俘获与界面陷阱形成间关系的表达式.利用初始1/f噪声功率谱幅值与氧化层空穴俘获之间的联系,建立了辐照前的1/f噪声幅值与辐照诱生界面陷阱数量之间的半经验公式,并通过实验予以验证.研究结果表明,由于辐照诱生的氧化层内陷阱通过与分子氢作用而直接参与到界面陷阱的建立过程中,从而使界面陷阱生成数量正比于这种陷阱增加的数量,因此辐照前的1/f噪声功率谱幅值正比于辐照诱生的界面陷阱数量.研究结果为1/f噪声用作MOSFET辐照损伤机理研究的新工具,对其抗辐照性能进行无损评估提供了理论依据与数学模型.     

用光波导光模光谱技术研究DNA-DNA结合蛋白相互作用

探讨了应用光波导光模光谱(Optical waveguide lightmode spectroscopy,OWLS)技术研究DNA-DNA结合蛋白相互作用的可行性和灵敏性。以固定在传感器芯片表面的DNA探针为捕捉分子,溶液中同时含有探针结合序列和NF—κB结合位点序列的寡核苷酸与NF-κB亚单位p50同源二聚体形成的DNA-蛋白质复合物为检测分子,用光波导光模光谱检测技术建立非标记DNA-DNA结合蛋白相互作用检测研究体系。利用这一体系对不同样品中NF-κB p50浓度和具不同NF-κB结合位点序列的寡核苷酸与NF-κB p50亲合和力进行检测。样品中低至0．33 nmol/1的NF-κB p50被光波导光模光谱检测出,不同的NF-κB结合序列与NF-κB p50亲合力有显著的差异。研究发现,光波导光模光谱技术可以用于DNA-DNA结合蛋白相互作用研究,所建立的非标记检测研究体系可以进行样品中结合蛋白含量高灵敏检测和核酸序列与结合蛋白的亲合力的检测研究。     

Characterization and activity of visible-light-driven TiO2 photocatalyst codoped with lanthanum and iodine

The novel visible-light-activated La/I/TiO₂ nanocomposition photocatalyst was successfully synthesized using precipitation-dipping method, and characterized by X-ray powder diffraction (XRD), the Brunauer-Emmett-Teller (BET) method, transmission electron microscopy (TEM), thermogravimetry-differential scanning calorimetry (TG-DSC) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). The photocatalytic activity of La/I/TiO₂ was evaluated by studying photodegradation of reactive blue 19 as a probe reaction under simulated sunlight irradiation. Photocatalytic experiment results showed that the maximum specific photocatalytic activity of the La/I/TiO₂ photocatalyst appeared when the molar ratio of La/Ti was 2.0 at%, calcined at 350 °C for 2 h, due to the sample with good crystallization, high BET surface area and small crystal size. Under simulated sunlight irradiation, the degradation of reactive blue 19 aqueous solution reached 98.6% in 80 min, which showed La/I/TiO₂ photocatalyst to be much higher photocatalytic activity compared to standard Degussa P25 photocatalyst. The higher visible light activity is due to the codoping of lanthanum and iodine.     

低声阻抗复合压电陶瓷的研究及应用

本文研究了我们所配制夹心结构复合压电材料低声阻抗的特性。实验表明，夹心复合压电陶瓷材料的声阻抗，与所用陶瓷材料的种类，气孔率，孔径，样品厚度以及工艺制备过程有关。实验证明，研制特定阻抗的材料是可行的，最后，用研制的新材料成功地应用于混凝土、Ｃ／Ｃ复合材料等非金属材料的超声检测中。     

Pulse advancement and delay in an integrated-optical two-port ring-resonator circuit: direct experimental observations

We report experimental observations of the negative-group-velocity (v(g)) phenomenon in an integrated-optical two-port ring-resonator circuit. We demonstrate that when the v(g) is negative, the (main) peak of output pulse appears earlier than the peak of a reference pulse, while for a positive v(g), the situation is the other way around. We observed that a pulse splitting phenomenon occurs in the neighborhood of the critical-coupling point. This pulse splitting limits the maximum achievable delay and advancement of a single device as well as facilitating a smooth transition from highly advanced to highly delayed pulse, and vice versa, across the critical-coupling point.     

LD抽运Cr~(4 )∶YAG高重复率被动调QNd∶YVO_4激光器

采用Cr4 ∶YAG晶体作为可饱和吸收体,实现连续激光二极管(LD)端面抽运的Nd∶YVO4激光器的高重复率被动调Q·在注入抽运功率为8.8W时,得到重复频率23.8kHz、平均功率1.21W的调Q脉冲序列;每个脉冲能量为51μJ、脉宽为25ns、峰值功率达到2.03kW·实验上研究了脉冲重复频率、平均输出功率、脉冲宽度、单脉冲能量与抽运功率、输出镜透过率的关系·实验结果表明,当抽运功率较大时,脉冲重复频率和输出平均功率随着抽运功率的增加而减小,对此进行了合理的理论解释·     

倒置结构锥形束计算机层析的精确成像与Grangeat算法实现

研究了一种新的圆加垂直单弧段的锥顶轨迹的锥形束计算机层析（CT）的完全性条件和精确重建的Grangeat方法，提出了倒置结构锥形束计算机层析的便于实现的圆加垂直多弧段的成像结构及进行精确重建的完全性条件。利用倒置成像结构与现有成像结构之间的等价关系，给出了倒置结构锥形束计算机层析的重建算法。最后，对上述几方面进行了计算机模拟。