Determination of 12 additives in beverages by evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets combined with liquid chromatographyEI北大核心CSCD

An analytical method for the simultaneous determination of 12 additives in beverages was developed using evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets EVA-DLLME-SFOcombined with high performance liquid chromatography HPLC. The samples were extracted twice with 70%V/Vmethanol aqueous solution and extracted by EVA-DLLME-SFO method after the combination of the extractsand finally determined by HPLC. Extraction parameterssuch as types and amounts of extractantevaporant and heating agentthe concentration of saltand the extraction time were optimized. Under the optimized conditionsthere were good relationships in the ange of 0.25-50 μµg/mL with the limits of detection of 1.5 to 13.6 mg/kg and limits of quantification of 5.2 to 45.3 mg/kg. The recoveries at three spiked levels1025 and 50 mg/kgwere 76.8% to 101.2% with the relative standard deviations of 0.11% to 4.7%. The method can be used for rapid detection of 12 additives in beverages. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

磁性三维氮掺杂碳纳米材料对6种双酚类化合物的吸附性能及其在泡腾分散微萃取中的应用

采用简单高温煅烧法成功制备了磁性钴镍基氮掺杂三维碳纳米管与石墨烯复合材料(CoNi@NGC),将其作为吸附剂用于水体中6种双酚类化合物(BPs)的吸附性能和机理研究。将CoNi@NGC复合纳米材料用作萃取介质,运用酸碱泡腾片的CO₂强力分散作用,开发了泡腾反应强化的分散固相微萃取前处理方法,结合高效液相色谱-荧光检测(HPLC-FLD)快速定量饮料中痕量BPs。采用扫描电镜、透射电镜、傅里叶红外光谱、氮气吸脱附、X射线光电子能谱和磁滞回线等技术手段对材料形貌结构进行表征,结果显示:该吸附剂成功实现氮元素的掺杂,且具有较大的比表面积(109.42 m²/g)、丰富的孔径及较强的磁性(17.98 emu/g)。吸附剂投加量、pH、温度、时间等因子优化试验表明:当pH=7,在初始质量浓度为5 mg/L的BPs混合溶液中投加5 mg CoNi@NGC, 298 K反应5 min,对双酚M(BPM)、双酚A(BPA)的吸附率分别高达99.01%和98.21%。作用90 min时对双酚Z(BPZ)、BPA、BPM的吸附率近100%。在吸附过程中,BPs与CoNi@NGC之间的整个吸附过程主要受氢键、静电作用和π-π共轭作用共同控制。整个吸附过程符合Freundlich吸附等温线模型和准二级动力学方程,吸附自发进行。进一步将CoNi@NGC作为萃取介质制备成磁性泡腾片,利用泡腾分散微萃取技术高效富集和提取6种盒装饮料中的BPs,优化了影响富集效果的泡腾片的存在与否、洗脱剂种类、洗脱时间、洗脱体积等关键因子,在最佳萃取条件下(pH=7,投加5 mg CoNi@NGC, 2 mL丙酮洗脱6 min),结合HPLC-FLD,新开发的泡腾分散微萃取方法提供的检出限为0.06~0.20 μg/L,定量限为0.20~0.66 μg/L,日内和日间精密度分别为1.44%~4.76%和1.69%~5.36%,在实际样品中不同水平下的加标回收率为82.4%~103.7%,在桃汁中检测到BPA和双酚B(BPB)分别为2.09 μg/L和1.37 μg/L。再生试验表明该吸附材料至少可以重复使用5次以上,显著降低了分析的试验成本。与其他方法相比,该方法具有灵敏度高、萃取速度快、环境友好等优点,在常规食品污染监测中具有较强的应用价值。     

Genetically engineered materials: Proteins and beyond

Information-rich molecules provide opportunities for evolution.Genetically engineered materials are superior in that their properties are coded within genetic sequences and could be fine-tuned.In this review,we elaborate the concept of genetically engineered materials(GEMs)using examples ranging from engineered protein materials to engineered living materials.Proteinbased materials are the materials of choice by nature.Recent progress in protein engineering has led to opportunities to tune their sequences for optimal material performance.Proteins also play a central role in living materials where they act in concert with other biological components as well as nonbiological cofactors,giving rise to living features.While the existing GEMs are often limited to those constructed by building blocks of biological origin,being genetically engineerable does not preclude nonbiologic or synthetic materials,the latter of which have yet to be fully explored.     

Gold-Catalyzed One-Pot Synthesis of Polyfluoroalkylated Oxazoles from N-Propargylamides Under Visible-Light Irradiation

A gold-catalyzed synthesis of polyfluoroalkylated oxazoles from N-propargylamides under visible-light irradiation has been developed. These reactions display excellent compatibility of radicals and gold catalysts under visible-light irradiation. Mechanistic experiments indicate that polyfluoroalkyl iodides play a dual role in enhanced compatibility of radicals and gold catalysts through assisted protodeauration of vinyl gold and reactivated the gold catalyst. In addition, PPh₃AuNTf₂ not only activates N-propargylamide to generate vinyl gold intermediate, but also greatly promotes homolysis of polyfluoroalkyl iodides under blue light irradiation.     

Synthesis of Fluorescent Carbon Dots and Their Application in Ascorbic Acid Detection

Water-soluble fluorescent carbon dots (CDs) were synthesized by a hydrothermal method using citric acid as the carbon source and ethylenediamine as the nitrogen source. The repeated and scale-up synthetic experiments were carried out to explore the feasibility of macroscopic preparation of CDs. The CDs/Fe³⁺ composite was prepared by the interaction of the CDs solution and Fe³⁺ solution. The optical properties, pH dependence and stability behavior of CDs or the CDs/Fe³⁺ composite were studied by ultraviolet spectroscopy and fluorescence spectroscopy. Following the principles of fluorescence quenching after the addition of Fe³⁺ and then the fluorescence recovery after the addition of asorbic acid, the fluorescence intensity of the carbon dots was measured at λex = 360 nm, λem = 460 nm. The content of ascorbic acid was calculated by quantitative analysis of the changing fluorescence intensity. The CDs/Fe³⁺ composite was applied to the determination of different active molecules, and it was found that the composite had specific recognition of ascorbic acid and showed an excellent linear relationship in 5.0–350.0 μmol·L⁻¹. Moreover, the detection limit was 3.11 μmol·L⁻¹. Satisfactory results were achieved when the method was applied to the ascorbic acid determination in jujube fruit. The fluorescent carbon dots composites prepared in this study may have broad application prospects in a rapid, sensitive and trace determination of ascorbic acid content during food processing.     

Determination of PEGylation homogeneity of polyethylene glycol-modified canine uricase

Polyethylene glycol-modified canine uricase (PEG-UHC) was prepared by modifying the ε-amino group of lysine residues on the canine uricase (UHC) protein to near-saturation with 5 kDa monomethoxyl-polyethylene glycol succinimide (mPEG-SPA-5k). In order to accurately determine the PEGylation uniformity of PEG-UHC, CZE, 3–8% gradient gel SDS-PAGE, and imaging CIEF (iCIEF) analyses were compared. CZE could not effectively separate PEG-UHC proteins with different degrees of modification, 3–8% gradient gel SDS-PAGE could separate PEG-UHC into seven gel bands; however, most of the gel bands were smeared or blurred, and the separation of PEG-UHC samples by iCIEF was significantly better than that by 3–8% gradient gel SDS-PAGE. Under denatured conditions, iCIEF separated 12 pI peaks, and could also accurately quantify the relative monomer PEG-UHC content. More than 85% of the total monomeric PEG-UHC was conjugated with 7–12 PEG molecules; of this 85%, approximately 40% was conjugated with 9–10 PEG molecules. These results demonstrated that iCIEF exhibits good potential for determining the PEGylation homogeneity of PEGylated protein drugs.     

NiS助催化剂的硫调控光沉积合成及其增强g-C3N4的光催化产氢性能

作为一种非金属聚合半导体,石墨相氮化碳(g-C3N4)具有特殊的能带结构、可见光响应能力以及优良的物理化学性质以及生产成本低等特点,因而已成为目前光催化领域的研究热点.然而,由于g-C3N4被光激发的电子与空穴极易复合,导致g-C3N4材料的光催化性能并不理想.而助剂修饰是实现光生载流子有效分离以提高光催化活性的有效途径.众所周知,贵金属Pt可以作为光催化产氢的反应位点,但高昂的成本限制了它的实际应用.所以,开发高效的非贵金属助剂很有必要.近年来,NiS作为优良的电子助剂在光催化领域受到广泛关注.大量研究表明,NiS可以作为g-C3N4的产氢活性位点用于提高其光催化产氢性能.NiS助剂主要是通过水热、煅烧和液相沉淀的方法修饰在g-C3N4的表面上.相较而言,助剂的光沉积方法具有一些独特的优势,例如节能、环保、简易并且能够实现其原位牢固地沉积在光催化剂的表面.然而g-C3N4光生电子和空穴强还原和氧化能力容易导致像Ni^2+的还原和S^2-的氧化等副反应发生,因此NiS助剂很难光沉积在g-C3N4材料表面.本文采用硫调控的光沉积法成功合成了NiS/g-C3N4光催化材料,该法利用g-C3N4在光照条件下产生的光生电子结合S以及Ni^2+生成NiS,然后原位沉积在g-C3N4表面.由于E0(S/NiS)(0.096 V)比E0(Ni^2+/Ni)(-0.23 V)更正,所以NiS优先原位沉积在g-C3N4表面.因此,硫调控的光沉积法促进了NiS的生成,并抑制了金属Ni等副反应的形成.通过X射线光电子能谱分析NiS/g-C3N4的表面化学态,表明该方法能成功地将NiS修饰在g-C3N4的表面,这也得到透射电镜和高分辨透射电镜结果的证实.光催化产氢的结果表明,NiS/g-C3N4光催化剂实现了良好的光催化性能,其最优产氢速率(244μmol h^?1 g^?1)接近于1 wt%Pt/g-C3N4(316μmol h^?1 g^?1).这是因为硫调控的光沉积法实现NiS助剂在g-C3N4表面的修饰,从而促进光生电子与空穴的有效分离,进而提高光催化制氢效率.此外,在该方法中,NiS的形成通常在g-C3N4光生电子的表面传输位点上,因此也能够使NiS提供更多的活性位点以提高界面产氢催化反应速率.电化学表征结果也进一步证明NiS/g-C3N4光催化剂加快了电子与空穴的分离和转移.更重要的是,这种简易且通用的方法还可以实现CoSx,CuSx,AgSx对g-C3N4的助剂修饰,并且都提高了g-C3N4的光催化产氢性能,表明该方法具有一定的普适性,为高效光催化材料的合成提供了新的思路.     

Multi-functional cotton textiles design using in situ generating zeolitic imidazolate framework-67 (ZIF-67) for effective UV resistance,antibacterial activity,and self-cleaning

Cellulose - In this study, a multifunctional cotton fabric with durable superhydrophobic, antibacterial, and UV resistance properties was prepared by in situ growth of zeolitic imidazolate...     

Preparation and adsorption property of novel inverse-opal hierarchical porous N-doped carbon microspheres

The design of pore structure is the key factor for the performance of porous carbon spheres.In this wo rk,novel micron-sized colloidal crystal microspheres consisting of fibrous silica(F-SiO_2) nanoparticles are firstly prepared by water-evapo ration-induced self-assembly of F-SiO_2 nanoparticles in the droplets of an inverse emulsion system to be used as sacrificial templates.Acrylonitrile(AN) was infiltrated in the voids of the F-SiO_2 colloidal crystal microspheres,and in-situ induced by ~(60)Co y-ray to polymerize into polyacrylonitrile(PAN).After the PAN-infiltrated F-SiO_2 colloidal crystal microspheres were carbonized and etched with HF solution,novel micron-sized inverse-opal N-doped carbon(IO-NC) microspheres consisting of hollow carbon nanoparticles with a hierarchical macro/meso-porous inner surface were obtained.The IO-NC microspheres have a specific surface area as high as 266.4 m~2/g and a molar ratio of C/N of 5.They have a good dispersibility in water,and show a high adsorption capacity towards rhodamine B(RhB) up to 137.28 mg/(g microsphe re).This work offers a way to obtain novel micron-sized hierarchical macro/meso-porous N-doped carbon microspheres,which opens a new idea to prepare high-performance hierarchical porous carbon materials.     

A purely organic D-π-A-π-D emitter with thermally activated delayed fluorescence and room temperature phosphorescence for near-white OLED

A purely organic D-π-A-π-D type emitter showing thermally activated delayed fluorescence(TADF) and room temperature phosphorescence(RTP) was designed and synthesized by utilizing the benzophenone as an acceptor and the N-phenyl-2-napthylamine as a donor moiety.It exhibits considerable TADF character in doped PMMA film and room temperature phosphorescence with a long lifetime of 74 ms at466 nm in solid state.The devices with the configuration of ITO/Mo_2 O_3(4 nm)/mCP(30 nm)/mCP:x wt%NP2 BP/TmTyPB(60 nm)/LiF(1.5 nm)/AI(100 nm) were prepared by vacuum evaporation to explore their electroluminescent performance.Intere stingly,the non-doped device has obtained near-white emission with a fluorescence emission peak at 475 nm and a phosphore scence emission peak at 563 nm having the CIE coordinate of(0.23,0.32) and the maximum external quantum efficiency of 1.09%.