Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

EFFECTIVE SPECIFIC HEATS OF MULTI-PHASE THERMOELASTIC COMPOSITES

This paper studies the effective properties of multi-phase thermoelastic composites. Based on the Helmholtz free energy and the Gibbs free energy of individual phases, the effective elastic tensor, thermal-expansion tensor, and specific heats of the multi-phase composites are derived by means of the volume average of free-energies of these phases. Particular emphasis is placed on the derivation of new analytical expressions of effective specific heats at constant-strain and constant-stress situations, in which a modified Eshelby’s micromechanics theory is developed and the interaction between inclusions is considered. As an illustrative example, the analytical expression of the effective specific heat for a three-phase thermoelastic composite is presented.     

Enhanced photocatalytic activity of hybrid reduced graphene oxide–CeO2 hierarchical flower-like nanostructures

Research on Chemical Intermediates - The combination of the unique properties of graphene with functional characteristics of metal oxides is an interesting pathway to achieve desirable properties...     

Ethylene polymerization with long‐lifetime monopendant thienyl‐substituted group 4 metallocenes

A series of group 4 metallocenes (RCp)[Cp―(bridge)―(2‐C₄H₃S)]MCl₂ [M = Ti ( C1 , C2 , C3 , C4 ); M = Zr ( C5 , C6 , C7 , C8 )] bearing a pendant thiophene group on a cyclopentadienyl ring have been synthesized, characterized and tested as catalyst precursors for ethylene polymerization. The molecular structures of representative titanocenes C2 and C4 were confirmed by single‐crystal X‐ray diffraction and revealed that both complexes exist in an expected coordination environment for a monomeric bent metallocene. No intramolecular coordination between the thiophene group and the titanium center could be observed in the solid state. Upon activation by methylaluminoxane (MAO), titanocenes C1 , C2 , C3 , C4 showed moderate catalytic activities and produced high‐ or ultra‐high‐molecular‐weight polyethylene (M_v 70.5–227.1 × 10⁴ g mol^?1). Titanocene C3 is more active and long‐lived, with a lifetime of nearly 9 h at 30 °C. At elevated temperatures of 80–110 °C, zirconocenes C5 , C6 , C7 , C8 displayed high catalytic activities (up to 27.6 × 10⁵ g PE (mol Zr)^?1 h^?1), giving high‐molecular‐weight polyethylene (M_v 11.2–53.7 × 10⁴ g mol^?1). Even at 80 °C, a long lifetime of at least 2 h was observed for the C8/MAO catalyst system. Copyright © 2014 John Wiley & Sons, Ltd.     

EDTA-甘氨酸联合法制备LaAlO3基电解质材料及其电性能

采用EDTA-甘氨酸联合法(EGCP)合成具有钙钛矿结构的La0.90Sr0.10Al0.97Mg0.03O3-δ(LSAM)粉体。采用TG-DSC,XRD,ICP-OES和TEM对粉体进行表征。在750℃下,无定形结构的粉末直接转化为钙钛矿结构的LSAM粉体。经1000℃煅烧3 h后的粉体,团聚程度低,粒径分布均匀,平均粒径约为77 nm,具有良好的烧结性能。通过SEM对材料的显微结构进行观察并分析其对电性能的影响。采用直流四电极法在空气中测定材料的总电导率,在800℃时,EGCP合成的LSAM电解质的总电导率为1.50×10-2S.cm-1,比固相法的高47.1%。