Numerical method and models for anti-plane strain of a system with a thin elastic wedge

The paper presents a general method to find asymptotics for a (multi-)wedge system containing a thin wedge. It employs separation of the symmetric and anti-symmetric parts of the boundary displacements and tractions of the wedge. The method is applicable when the angle of the thin wedge turns to zero. A physical interpretation of the derived equations is obtained by using power expansions of non-polynomial functions, which appear after the Mellin transform. We establish that the first term in the expansion of the symmetric part corresponds to shear, while the first term of the anti-symmetric part describes deflection of the wedge axis. Numerical experiments, performed by using a code developed on the basis of the theory, show that using only the first terms of the expansions insignificantly influence accuracy: the approximate results coincide with the exact values of roots to the third significant digit even for the wedge angle of 30°.     

Rotational Spectra of Argon Acetone: A Two-Top Internally Rotating Complex

The rotational spectra of the argon acetone weakly bound complex was studied by pulsed jet Fabry-Perot Fourier transform microwave spectroscopy. Over 500 transitions of the complex were measured between 5.5 and 26 GHz from J=2-1 to J=12-11. The two methyl groups undergo hindered internal rotation resulting in four or five internal rotation states. The microwave transitions are within these states, resulting in a splitting of each rotational transition into four and sometimes five distinct transitions. The three-fold barrier to internal rotation is determined to be 260 cm⁻¹, 2% less than the 266 cm⁻¹ barrier in acetone itself. The structure of the complex has the argon atom above the heavy atom plane of the acetone, 3.52 Å from the CO bond and approximately in the C_s plane, which is perpendicular to the CCC plane of acetone.     

Coercivity analysis in R17Fe83−χBχ magnets

We studied the coercivity in magnets of composition R₁₇Fe_83−χB_χ (R = Nd, Pr and χ = 8, 30), using measurements of the coercive field H_c, its angular dependence, and the magnetic viscosity coefficient S_v, for temperatures between 4.2 and 500 K. The results are discussed in relation to a model which does not specifically consider the detailed mechanisms involved in magnetization reversal, but which provides information about the magnetic properties in the activation volume v where magnetization reversal is initiated. It is concluded that the ordering temperature in v tends to be slightly smaller than in the bulk and that the room temperature anisotropy in v is not strongly reduced with respect to the bulk value. Finally, a direct evaluation of the dipolar interactions is in good agreement with results obtained from H_c(T).     

X-ray evidence for the absence of 90°-domains in polycrystalline PbTiO3 thin films with grains below a critical size

3 thin films is systematically studied by using X-ray diffraction (XRD). The PbTiO₃ thin films with different average grain sizes were prepared on various substrates by a sol-gel process. The films on NaCl and fused glass are randomly grain-oriented, while those on (111)Pt/Ti/SiO₂/Si are highly {100} cubic index grain-oriented . It is found from the XRD patterns of the films on NaCl that with decreasing average grain size from 230 to 80 nm, the intensities of high h index (h>l) peaks (hkl), such as (100), (110), (200), (201), (210), (211), etc., decrease rapidly and ultimately disappear, whereas another set of peaks (lkh), including (001), (002), (102), (112), etc., are still intense. This interesting result suggests that at grain size below a certain critical size an increasing number of grains no longer show 90°-domains, which is confirmed by TEM observations. Meanwhile, X-ray evidence of such a grain-size-related absence of 90°-domains is also found for PbTiO₃ films on Pt(111) and fused-glass substrates. The volume fractions of single-domain grains (without 90°-domains) in the films are estimated from their XRD patterns. By combining SEM and TEM investigations, the critical grain size for the formation of 90°-domains is further determined to be near 200 nm. Received: 19 December 1996/Accepted: 24 March 1997     

Phenylene vinylene‐based electroluminescent polymers with electron transport block in the main chain

We report a new route for the design of soluble phenylene vinylene (PV) based electroluminescent polymers bearing electron‐deficient oxadizole (OXD) and triazole (TZ) moieties in the main chains with the aryloxy linkage. Both series of the PV‐based polymers were prepared by Wittig reaction. By properly adjusting the OXD and/or TZ content through copolymerization, we can achieve an enhanced balance of hole‐ and electron injections, such that the device efficiency is significantly improved. Light‐emitting diodes fabricated from P1, P2, P3, P4, P5, P6, and P7 with the configuration of Indium–Tin Oxide (ITO)/Poly (styrene sulfonic acid) doped poly (ethylenedioxythiophene) (PEDOT)/polymer/Ca/Al, emit bright green light with the maximum peak around 500 nm. For the device using the optimal polymer (P4) as emitting layer, a maximum brightness of 1300 cd/m² at 20 V and a maximum luminance efficiency of 0.325 cd/A can be obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3469–3478, 2006     

含嘧啶环的双冠醚(Ⅳ)

前文已报道由啶环桥联两个苯并冠醚的双冠醚的合成与性质。由于嘧啶环的刚性较大,能把两个冠醚单元固定在有效地协同作用位置,因此以它们作中性载体的离子选择性电极具有较好的选择性。为了进一步研究这类双冠醚的性质,我们合成了四种嘧啶环桥联两个脂肪族冠醚的双冠醚,并经元素分析、IR、′HNMR鉴定。     

Molar conductivity calculation of Li-ion battery electrolyte based on mode coupling theory

A method is proposed to calculate molar conductivity based on mode coupling theory in which the ion transference number is introduced into the theory. The molar conductivities of LiPF6, LiClO4, LiBF4, LiAsF6 in PC (propylene carbonate) are calculated based on this method. The results fit well to the literature data. This presents a potential way to calculate the conductivities of Li-ion battery electrolytes.     

Single Atom Alloy Preparation and Applications in Heterogeneous Catalysis

There have been remarkable progresses in manipulating heterogeneous catalysts' nanostructures in the past decade. The concept of single atom alloy (SAA) was firstly proposed in 2012 when researchers successfully stabilized single Pd atoms on the Cu(111) surface. However, earlier work in 2009, which focused on replacing one Au atom with a Pd atom in thiolate protected Au₂₅ nanoclusters, could also be considered as the pioneer work of single atom alloy. Both kinds of single atom alloys exhibited the potential of maximum utilization of scarce elements and attractive catalytic performances. The well‐defined structures of SAA catalysts make accurate modeling possible, which further realizes the rational design of single atom alloy catalysts. In this review, we summarize the research trajectory of single atom alloys as well as recent achievements in this field. We also introduce several commonly adopted characterization methods for SAA catalysts such as scanning tunneling microscopy (STM), temperature programmed reaction (TPR), extended X‐ray absorption fine structure (EXAFS) spectra, matrix assisted laser desorption/ionization mass spectrum (MALDI‐MS) and differential pulse voltammetry (DPV). Through discussing recent progresses in SAA catalysts, we propose that future researches in this filed should be focused on exploring new kinds of metal nanocrystals and controlling the nanostructure of SAA even more precisely.