Mechanism of proton anisotropic velocity distribution in the solar wind

Although it has been long that spacecraft observed the anisotropy of velocity protons in the solar wind, there is still not a reasonable explanation. In this paper we try to give an explanation from the diffusion plateau of protoncyclotron resonance predicted by the quasi-linear theory for the resonance between the protons and the parallel propagating waves. We consider the effect of dispersion relation on diffusion plateau and notice that the diffusion plateau we have got by using cold plasma dispersion relation accords with the density contours in the velocity phase space detected at 0.3 AU in fast solar wind. For explaining proton distributions obtained in the fast solar wind from 0.7 AU to 1 AU hot plasma dispersion relation should be considered. We also give a theoretical relation of proton thermal anisotropy A and plasma parameter β.     

F-P半导体激光器实现多波长注入锁定

F-P半导体激光器中对于TE模比TM模有更大的束缚系数,并且在其反射面上有更高的反射率.当TE模和TM模同时注入F-P半导体激光器的谐振腔时,TE模方向的信号得到增长,TM模方向的信号受到抑制.F-P半导体激光器的这种特性使得它类似于一个偏振器,但是其优越之处在于经过F-P半导体激光器注入锁定之后的光信号没有功率损耗.采用F-P半导体激光器的注入锁定原理,使入射光信号没有功率损耗地由偏振光转换为部分偏振光,降低了通信系统中传输信号的偏振敏感性,使传输信号的质量得到提高,实现了F-P半导体激光器三波长和四波长注入锁定.     

强激光冲击铝合金改性处理研究

利用新型聚偏1.1-二氟乙烯（PVDF）压电传感器,实现了对激光引发的冲击波压力的实时测量,得到激光引发的冲击波峰压在铝中成指数型的衰减规律;观测了不同约束层材料在铝靶表面产生的激光冲击波,研究了不同约束层对冲击效果的影响;最后用激光冲击强化装置对7050-T7451航空铝合金结构材料进行了冲击强化处理,对试件激光冲击区存在的残余压应力及位错密度进行了测量。结果显示经激光冲击处理的试件表面具有极高的残余压应力,可达-200MPa以上。激光冲击处理后铝合金的位错密度得到显著的提高,疲劳寿命提高到175％～428％。这些重要结果对激光冲击改性处理技术的实际应用具有指导性作用。     

双变形镜自适应光学系统像差解耦研究

对由大行程变形镜和高空间频率变形镜组成的双变形镜自适应光学系统中的像差解耦原理和限定像差校正算法做了理论分析。认为在高空间频率变形镜的斜率响应矩阵中加入限定像差向量,根据直接斜率法分别计算出两个变形镜的控制电压,可以实现两个变形镜分别对低阶像差和高阶像差的闭环校正。仿真研究了19单元变形镜和61单元变形镜组成的双变形镜自适应光学系统对低阶像差和高阶像差分别校正的情况,结果说明双变形镜自适应光学系统的校正效果与理想行程的单变形镜自适应光学系统的校正效果相当,避免了制作同时具有大行程和高空间频率两个特征的变形镜。     

探针尖带金属微粒的光子扫描隧道显微镜成像数值模拟

引入了色散介质的时域有限差分法散射场方程,并针对光子扫描隧道显微镜的带金属尖光纤扫描成像问题进行三维的数值模拟。在考虑了光纤和样品相互作用的情况下,采用等效入射波法设置入射波,探针扫描模式为等高扫描模式,从成像分辨力和灵敏度的角度,比较了不同入射角、不同的光纤一样品间距,不同金属类型,及不同金属尖大小的成像情况。数值模拟结果显示,带金属颗粒光纤探针尖的光子扫描隧道显微镜在成像分辨力和灵敏度上有显著的改进,而带不同类型金属颗粒情况下对分辨力影响不大,灵敏度是银最好。     

原子力与光子扫描隧道组合显微镜

介绍了超高分辨光于扫描隧遭显微镜（PSTM）的计冗历程,为解决第一代（单光束照明）光千扫捕隧逼显傲镜中存在人为假象和样品光学图像与形貌图像难于分离两个难题,用“对称双光束照明方法消假象,用原子力与光子扫描隧道组合显微镜（AF／PSTM）图像分解方法分离样品光学透过率、折射率与形貌图像。研制成功新一代原子力与光子扫描隧道组合显微镜（AF／PSTM）样机。该样机在一次扫描中已获得两幅原子力显微镜图像（形貌与相位）和两幅光学图像（透过率和折射率）,有效地减少了假象,分解了样品光学折射率、透过率与形貌图像。     

Prediction of lattice constant in perovskites of GdFeO3 structure

Lattice constants in GdFeO₃-type ABO₃ perovskites are correlated to their constituent elemental properties by using linear regression (LR) and artificial neural networks (ANN) techniques and a sample set of 157 known GdFeO₃-type ABO₃ perovskites. LR models are first obtained using two elemental ionic radii only and ANN models, using five elemental properties; ionic radii, electronegativities of cation A and B, and the valence of ion A, are further developed to improve the model predictability, which reaches an error limits of less than 2%. It is shown that lattice constants of these compounds only roughly correlate to their ionic radii, and for a good prediction model 3 more elemental properties (electronegativity and valence) are necessary. In new materials research, where lattice constant is one of the key design target, the developed LR and ANN models may be used to screen and shortlist promising perovskites from a large pool of all possible candidates. These selected compounds may undergo further test using relatively more expensive experiments or quantum mechanics computations.     

On projective group properties of the 6D pseudo-Riemannian space

We study the six-dimensional pseudo-Riemannian spaces with two time-like coordinates that admit non-homothetic infinitesimal projective transformations. The metrics are manifestly obtained and the projective group properties are determined. We also find a generic definition of projective motion in the 6-dimensional rigid h-space. Presented at the International Colloquium “Integrable Systems and Quantum Symmetries”, Prague, 16–18 June 2005.     

MP-C60(M=Cu,Co)化合物的合成、表征及光电性能研究

卟啉和金属卟啉不仅是良好的电子给予体,而且在紫外可见光区有着非常广泛的吸收,这有利于太阳能的利用.富勒烯(C60)由于自身独特的结构而成为较好的电子受体.近年来,大量共价键连卟啉-富勒烯D-A化合物被合成与研究[1-4].通过柔性连接体形成的卟啉-富勒烯化合物有利于增加给-受体间电子的流动性,使化合物具有优良的光电转换性能[2].中间体和产物的合成见图1.1和2的合成、纯化参照文献[2].3的合成:在N2下把37.2mg对羟基苯甲醛、75.2mg2、过量灼烧的无水碳酸钾加入30mL DMF中,80°C反应8h后,甲苯和蒸馏水分液,粗产品用硅胶柱层析,甲苯淋洗,…     

Control of gain and thermal carrier loss profiles for mode optimization in 980-nm broad-area vertical-cavity surface-emitting lasers

Optical gain and thermal carrier loss distributions regarding current diffusion and various electric contact areas are investigated to improve the near-field modes from the ring-shape to a Gaussian-like configuration for extra-broad-area and oxide-confined vertical-cavity surface-emitting lasers. In this work an equivalent circuit network model is used. The resistance of the continuously-graded distributed Bragg reflectors （DBRs）, the current diffusion and the temperature effect due to different electric-contact areas are calculated and analyzed at first, as these parameters affect one another and are the key factors in determining the gain and thermal carrier loss. Finally, the gain and thermal carrier loss distributions are calculated and discussed.