纳米ZnO的阳极消耗法制备和表征

采用阳极消耗法制备了纳米ZnO粉体,并利用XRD,TEM,XPS,UV-V is和PL测试技术对样品进行了表征.结果表明,所制样品为纤锌矿结构的纳米ZnO,颗粒呈类球形,平均粒径15 nm,具有很强的紫外吸收能力.位于531.44 eV的O1 s峰和PL谱上的绿带共同证明了氧空位存在,纳米ZnO的绿光发射带来自氧空位电子与价带空穴的辐射复合.     

Rheological Behavior of the Melts for Polyethylene-based Montmorillonite Nanocomposites

IntroductionOwing to their special structures or morphologies,polymer-based montmorillonite nanocomposites exhibitsome particular characteristics,such as,physical,thermal,and mechanical properties,induced by theaddition of very small amounts of inorganic …     

磷酰化氨基酸反应性质的理论研究

采用量子化学计算研究了磷酰化氨基酸的反应性质,包括N-磷酰氨基酸成肽反应、成酯反应、磷上酯交换反应和磷上的N→O迁移反应的机理以及计算模型和计算方法的选择,并从理论上解释了自然界选择α-氨基酸而不是β,γ-氨基酸的实验事实.     

Properties of TiO2-SiO2 Mixed Oxides and Photocatalytic Oxidation of Heptane and Sulfur Dioxide

A series of TiO2-XSiO2[X denotes the molar fraction(%) of silica in the mixed oxides] with different n(Ti)/n(Si) ratios was prepared with ammonia water as a hydrolysis catalyst. The photocatalysts prepared were characterized by XRD, thermal analysis, FTIR, UV-Vis and SPS. The characterization results of FTIR and UV-Vis spectra show that Ti atoms were gradually changed from octahedral coordination to tetrahedral coordination with the addition of silica, which is not beneficial for obtaining strong Bronsted acidity and higher photocatalytic activity. The photocatalytic activity experiments, which were conducted by using heptane (or SO2) as the model reactant, showed that TiO2-SiO2 containing a suitable amount of silica can exhibit much higher photocataiytic activity than pure TiO2. The enhanced photocatalytic activity can be attributed tothree following factors.. (1) smaller crystalline size;(2) higher thermal stability; (3) the new strong Broensted acidity.     

Synthesis and Characterization of {2-Formyl-6-[1-(2,4,6-trimethylphenyl)]-4- chlorophenoxy}_2Ni and Its Ethylene Oligomerization

1 INTRODUCTION Late-transition metal complexes as catalysts for ethylene oligomerization and polymerization have become an intense research subject[1]. Nickel com- plexes are in hot point due to the significant achieve- ments of academic research[2, 3] and industrial appli- cations[4, 5]. The nickel complexes with bidentate [P,O] ligands were industrialized as the SHOP pro- cess for α-olefins[4]. It is supposed that late transition metal complexes have a strong propensity of under- goi…     

壳聚糖/明胶/TiO2三元复合膜的制备与功能特性

纳米TiO2用阴离子表面改性剂SDS改性后,以溶液共混法制备了壳聚糖／明胶/TiO2复合膜,用FTIR、XRD、SEM、TEM表征了其结构与形态,并测试了其吸水率、透光率、力学性能和抑菌性能。进而探讨了复合膜中明胶和纳米TiO2含量对壳聚糖膜性能的影响。结果表明：复合膜中,壳聚糖、明胶和TiO2微粒间存在强烈的氢键相互作用,从而使明胶与壳聚糖具有良好的相容性,TiO2与壳聚糖、明胶分子间有很好的界面作用。适量TiO2的加入,可使壳聚糖／明胶共混膜的力学性能得到改善,明胶质量分数为0．30时,掺杂wTiO2为0．01、0．02的复合膜较壳聚糖／明胶共混膜的湿强及干态韧性分别提高了55．9％,40．8％和49．7％,47．9％。此外,复合膜的抑菌性能随明胶的增加而降低,但随TiO2的掺杂比的增加而增强,纳米TiO2的引入拓宽了壳聚糖和明胶两种天然高分子材料的应用范围。     

聚乳酸/β-磷酸三钙多孔复合支架的制备及性能研究

以聚乳酸和β-磷酸三钙共混制备了多孔复合支架,并对其孔隙率、降解性和力学性能进行了研究。结果表明,β-磷酸三钙的引入可以有效地减缓支架的降解,提高支架的力学性能。     

矿产品水分含量代表值Bootstrap模拟取样估计

在对矿产品水分含量基础统计学特征描述的基础上,采用内核密度估计对水分含量数据多态性进行了分析,根据双态分布的特点,使用Bootstrap模拟取样方法对试验样本值模拟重复取样,以多次Bootstrap模拟取样的均值与标准偏差作为矿产品水分含量有限样本代表值及标准偏差的稳健估计,实践证明Bootstrap模拟取样估计对矿产品水分含量代表值的估计是有效的,该项研究为矿产品水分含量代表值的准确评估提供了一种新方法.     

外围缩合四个1,10-啡啰啉单元的新氮杂酞菁的表面光伏响应及电场作用研究

通过电场诱导表面光电压谱确定外围缩合4个1,10-啡啉单元的氮杂酞菁为p型有机半导体,并对各个谱带进行合理的归属.结果发现,Soret带长波侧光电压曲线在电场作用下轻微蓝移,根据电场对高极化度n轨道基态的影响,将其归属为n-π^*     

1,5-苯并硫氮杂-α-苯基-β-内酰胺的合成及晶体结构

1，5-苯并硫氮杂与苯乙酰氯反应生成1，5-苯并硫氮杂-α-苯基-β-内酰胺（Ⅱ）。X-射线单晶衍射测定结果表明，该化合物分子式为C29H22CINOS，M=467.5，晶体属单斜晶系，P21／c空间群，a＝12．864（3），b=9．511（2），c=19．489（4）A，β=92.41（3）°，V=2382（1）A3，Dc=1．305g／cm3，Z=4，F（000）=976，μ=0．2636mm－1，R=0．068，Rw=0.068。该反应具有立体专一性，四员环上的2个苯基位于同一侧为顺式。产物分子中的七员环为类椅式构象。