Synthesis and electrochemical properties of regular hexahedron α-Fe2O3

Synthesis of α-Fe₂O₃ compound with regular hexahedron shape is firstly reported. X-ray diffraction and scan electron microscope are used to characterize the structure and morphology of the prepared sample, respectively. The average edge length of hexahedron is about 0.9 μm. A reaction mechanism has been proposed. The pH value is a crucial factor for the formation and shape of α-Fe₂O₃. Moreover, electrochemical impedance spectroscopy and charge-discharge test of α-Fe₂O₃ as anode material in lithium ion batteries are evaluated. The data indicate that the synthesized regular hexahedron α-Fe₂O₃ can show better electrochemical properties than that of the commercial.     

Resonance Rayleigh scattering method for direct determination of polyacrylamide in water samples using basic phenothiazine dyes

Binding polyacrylamide (PAM) with some basic phenothiazine dyes such as methylene blue (MB), toluidine blue (TB) or Azure B (AB) etc. can result in a significant enhancement of resonance Rayleigh scattering (RRS). The maximum RRS wavelengths (λ_max) appear at 348, 340 and 342 nm for MB, TB, and AB systems, respectively. Accordingly, a new RRS method for the direct determination of PAM at nanogram levels has been established. The optimum conditions of these reactions, the influencing factors have been investigated. The RRS intensity is directly proportional to the concentration of PAM in the range of 0.040–5.0 μg/mL for three systems. The methods exhibit high sensitivities, and the detection limits are 15.9 ng/mL for MB system, 44.0 ng/mL for TB system, and 59.8 ng/mL for AB system. The selectivity of the method is investigated by using MB system owing to the highest sensitivity. Concentrations of PAM in tap water, synthetic water and practical waste water samples are determined satisfactorily. The reaction mechanism and RRS enhancement reasons are discussed.     

Hydrothermal syntheses and crystal structure of a novel one-dimensional Pb(II) coordination polymer with chenodeoxycholic acid ligand

A novel 1D chain-like coordination polymer, {[Pb(CDCA)₂(DMF)] · DMF · 2H₂O]} _n (I) (HCDCA = chenodeoxycholic acid, DMF = dimethyl formamide), has been synthesized by hydrothermal method and characterized by single crystal X-ray diffraction, IR spectroscopy, and elemental analysis (CIF file CCDC no. 996098). X-ray diffraction analyses indicated that I displays distorted octahedral metal centers with secondary building units [Pb(CDCA)₂(DMF)] bridged by a pair of μ²-COO^?-bridges. In the crystal, interchain O-H?O hydrogen bonds are present and assemble the neighboring 1D chain into a (4,4) sql type three-dimensional (3D) supramolecular topological network.     

Effect of pH value on the growth morphology of KH2PO4 crystal grown in defined crystallographic direction

KH₂PO₄ single crystals were grown in aqueous solution at different pH values by using “point seeds” with a defined crystallographic direction at 59 degree to the Z axis. Atomic Force Microscope (AFM) was applied to observe the surface morphology of (100) face. It was found that at the same supersaturation, the larger steps appeared at the lower pH value before appearance of 2D nucleus. We found that 2D nucleus was occurred at σ ≤ 0.04 when pH value is <2.8. The occurrence of 2D nucleus was caused by the decreasing step‐edge free energy with the decreasing of pH value in the growth solution. In this paper, we observed the morphologies of (100) faces of KDP crystals which grew in solutions with different pH values. 2D nucleuses appeared on the terrace of growth steps when pH value down to 2.8 and 3.2 at supersaturation of 0.04, while pH value down to 2.4, only 2D nucleation control the growth. Therefore, the pH value can change the growth mechanism of KDP crystals.     

Insight into the thermal decomposition of kaolinite intercalated with potassium acetate: an evolved gas analysis

The thermal decomposition process of kaolinite–potassium acetate intercalation complex has been studied using simultaneous thermogravimetry coupled with Fourier-transform infrared spectroscopy and mass spectrometry (TG-FTIR-MS). The results showed that the thermal decomposition of the complex took place in four temperature ranges, namely 50–100, 260–320, 320–550, and 650–780 °C. The maximal mass losses rate for the thermal decomposition of the kaolinite–potassium acetate intercalation complex was observed at 81, 296, 378, 411, 486, and 733 °C, which was attributed to (a) loss of the adsorbed water, (b) thermal decomposition of surface-adsorbed potassium acetate (KAc), (c) the loss of the water coordinated to potassium acetate in the intercalated kaolinite, (d) the thermal decomposition of intercalated KAc in the interlayer of kaolinite and the removal of inner surface hydroxyls, (e) the loss of the inner hydroxyls, and (f) the thermal decomposition of carbonate derived from the decomposition of KAc. The thermal decomposition of intercalated potassium acetate started in the range 320–550 °C accompanied by the release of water, acetone, carbon dioxide, and acetic acid. The identification of pyrolysis fragment ions provided insight into the thermal decomposition mechanism. The results showed that the main decomposition fragment ions of the kaolinite–KAc intercalation complex were water, acetone, carbon dioxide, and acetic acid. TG-FTIR-MS was demonstrated to be a powerful tool for the investigation of kaolinite intercalation complexes. It delivers a detailed insight into the thermal decomposition processes of the kaolinite intercalation complexes characterized by mass loss and the evolved gases.     

Comparative curing kinetics of 1,4-bis (4-diaminobenzene-1-oxygen) n-butane and 4,4′-bis-(diaminodiphenyl) methane with tetraglycidyl methylene dianiline systems

Aromatic amine curing agent with flexible unit in backbone, 1,4-bis (4-diaminobenzene-1-oxygen) n-butane (DDBE), was synthesized, and the structure was confirmed by FT-IR and ¹H NMR. The curing kinetics of tetraglycidyl methylene dianiline (TGDDM, or AG80) using DDBE and 4,4′-bis-(diaminodiphenyl) methane (DDM) as curing agents, respectively, were comparatively studied by non-isothermal DSC with a model-fitting Málek approach and a model-free advanced isoconversional method of Vyazovkin. The dynamic mechanical properties and thermal stabilities of the cured materials were investigated by DMTA and TG, respectively. The results showed that the activation energy of AG80/DDBE system was slightly higher than that of AG80/DDM system. ?esták-Berggren model can generally simulate well the reaction rates of these two systems. DMTA measurements showed that the storage modulus of cured AG80/DDBE is similar to that of cured AG80/DDM at the temperature below glass transition temperature (T _g) and lower than that of cured AG80/DDM at the temperature above glass transition temperature, while T _g of cured AG80/DDBE is lower than that of cured AG80/DDM. TG showed that the thermal stabilities of these two cured systems are similar.     

Dynamic analysis on metal selenide electrodeposition

Based on the basic principles of kinetics and some reasonable assumptions about the electrodeposition process, a dynamic model for metal selenide electrodeposition (kink site selected model) was constructed. This model is of universal significance in realizing the compositional prediction and dynamic behavior analysis of deposited films for different main salt concentration ratios and was applied to the ternary Cu–In–Se system. For CuInSe₂ electrodeposition, in the Cu–Se system, the co-deposition of Cu and Se can be carried out within a large range of main salt concentration ratio; in the Cu–In system, the mole fraction of Cu in deposited thin films is always higher than that of Cu²⁺ in electrolyte, while in the In–Se system, the co-deposition of In and Se can be achieved only when the In³⁺ concentration is much higher than the H₂SeO₃ concentration. As for the compositional estimation of CuInSe₂, the predictive results of our dynamic model agree well with the experimental data. It is then found that by correcting the difference of kink site selectivity constants caused by the change of deposition potential, the error of the predictive results can be reduced.     

Coloring properties of novel 1,4-distyrylbenzene and 4,4′-distyrylbiphenyl fluorescent brighteners and their arrangement in cotton and polyester fiber

Some novel 1,4-distyrylbenzene (DSB) and 4,4′-distyrylbiphenyl (DSBP) fluorescent brighteners (FBs) were used to dye polyester and cotton fabrics. The CIE whiteness, color hue and reflectance spectrum of dyed fabrics were compared. DSBP derivatives could dye the cotton and polyester fabrics with a higher whiteness level and had a lower fluorescent quenching concentration than DSB derivatives. The color hue for the fabric dyed with DSB FBs was yellow-green, whereas that dyed with DSBP was blue–violet. The molecular arrangement in the fiber had a significant influence on their optical properties, resulting in different coloring properties. The increase in molecule planarity and rigidity generated by the interaction between the polymer and FB molecules caused a remarkable bathochromic shift in emission and excitation spectra. The H-aggregate of the DSB molecule in the fiber was easily generated, and the degree of aggregation increased with the molecular polarity. However, the aggregation of DSBP molecules in the polyester and cotton fiber was not found. The surface region of the cotton fiber was filled with FB molecules, whereas FB molecules in the polyester fiber aggregated easily, and incident light could pass through the surface region.     

A Protic Ionic Liquid Catalyzes CO2 Conversion at Atmospheric Pressure and Room Temperature: Synthesis of Quinazoline‐2,4(1H,3H)‐diones

The chemical fixation of CO₂ under mild reaction conditions is of significance from a sustainable chemistry viewpoint. Herein a CO₂‐reactive protic ionic liquid (PIL), [HDBU⁺][TFE^?], was designed by neutralization of the superbase 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) with a weak proton donor trifluoroethanol (TFE). As a bifunctional catalyst for simultaneously activating CO₂ and the substrate, this PIL displayed excellent performance in catalyzing the reactions of CO₂ with 2‐aminobenzonitriles at atmospheric pressure and room temperature, thus producing a series of quinazoline‐2,4(1H,3H)‐diones in excellent yields.     

Simultaneous In Situ Quantification of Two Cellular Lipid Pools Using Orthogonal Fluorescent Sensors

Lipids regulate a wide range of biological activities. Since their local concentrations are tightly controlled in a spatiotemporally specific manner, the simultaneous quantification of multiple lipids is essential for elucidation of the complex mechanisms of biological regulation. Here, we report a new method for the simultaneous in situ quantification of two lipid pools in mammalian cells using orthogonal fluorescent sensors. The sensors were prepared by incorporating two environmentally sensitive fluorophores with minimal spectral overlap separately into engineered lipid‐binding proteins. Dual ratiometric analysis of imaging data allowed accurate, spatiotemporally resolved quantification of two different lipids on the same leaflet of the plasma membrane or a single lipid on two opposite leaflets of the plasma membrane of live mammalian cells. This new imaging technology should serve as a powerful tool for systems‐level investigation of lipid‐mediated cell signaling and regulation.