石墨炉原子吸收光谱法直接测定血样中硒

用石墨炉原子吸收光谱法，以硝酸铜和硝酸铵为基体改进剂，塞曼效应扣背景，采用标准加入法可直接测定血样中硒，回收率为95％～105％，相对标准偏差为5．8％，检出限为96pg，测定结果准确可靠。     

Hβ-沸石的氧化物改性对由β-甲基萘选择性合成2,6-二甲基萘反应的影响

Ｈβ－沸石的氧化物改性对由β－甲基萘选择性合成２，６－二甲基萘反应的影响栗同林刘希尧１）（北京燕山石化公司研究院北京１０２５４９）王祥生（大连理工大学工业催化研究所大连１１６０１２）关键词β－甲基萘β沸石氧化物改性歧化烷基化分类号Ｏ６４３．３２在Ｃ－...     

男性型秃发患者发中K,Na,Ca,Mg元素含量分析

采用火焰原子吸收法对３０例男性型秃发患者及３８例毛发健康男性对照者发中宏量元素Ｋ、Ｎａ、Ｃａ、Ｍｇ的含量进行了测定。结果表明，男性型秃发患者发Ｋ含量明显高于对照组，具有统计学上的显著差异（Ｐ〈０．０１）。发Ｎａ、Ｃａ、Ｍｇ含量在两组间未见显著差异（Ｐ〉０．０５）。本文提示，体内某些宏量元素变化对男性型秃发可能产生一定影响。     

Terminally functionalized polyisobutylene oligomers as soluble supports in catalysis

A new phase selective hydrocarbon soluble polymer support is described.     

Solid state reactions of nitrogenous heterocyclic compounds(Ⅰ)——Solid state reactions of 3-methyl-l-phenyl-5-pyrazolone with carbonyl compounds

The solid state reaction of 3-methyl-1-phenyl-5-pyrazolone (MPP) with aromatic aldehydes and ke-tones benzil derivatives and imides,and the solid state Michael addition reaction of MPP with 4-arylidene-3-methyl-1-phenyl-5-pyrnzolone 2 were investigated.Some new solid state reactions between the reactants were found,from which a series of new compounds were obtained The structures of the products were identified by IR,1H NMR,MS,elemental analyses and also by X-ray crystal analysis,and the reaction mechanism of MPP with aromatic aldehydes and ketones was proposed     

金属材料分析方法的选择和施行：第五讲 金属材料中钨的测定（续）

此外,尚有二硫酚、邻羟基酚类试剂、酸性三苯甲烷类试剂、偶氮类试剂以及荧光酮类试剂等也都有应用于钨的光度测定的实例。但由于共存元素的干扰以及方法的成熟程度等问题尚未完全得到解决,在金属材料分析中的应用尚不普遍。其中,苯基荧光酮类试剂对钢铁中低含量钨的测定有一定的应用前景,举两例说明:例1:邻氯苯基荧光酮(o-Cl-PF)-CTMAB光度法测定钢及合金中低含量钨[w(W)0.01%~0·50%]。称取试样0.100 0~0.200 0 g,溶于硫酸-磷酸混合酸(H2SO4+H3PO4+H2O=3+10+12)10 mL中,滴加浓硝酸约1 mL氧化,蒸发至冒白烟,冷却,加水溶解盐类后冷…     

碳糊电极阳极溶出法测定中药甘草中桑色素

用碳糊电极阳极溶出法测定桑色素的含量。在0.15mol·L-1NH4Cl 氨水缓冲溶液的介质中富集120s,桑色素在+0.10V(vs.SCE)左右出现阳极溶出峰。其峰电流的大小与桑色素的浓度呈线性关系。线性范围为4.00×10-6～1.40×10-5mol·L-1,相关系数为0.9996,检出限可达1.00×10-6mol·L-1,回收率为99.87%～102.01%。此法不用汞电极,灵敏度高,操作方便、快捷,成功地用于甘草提取物中桑色素的测定。     

Background-free,fast protein staining in sodium dodecyl sulfate polyacrylamide gel using counterion dyes,zincon and ethyl violet

A background-free, fast protein staining method in polyacrylamide gel electrophoresis using an acidic dye, zincon (ZC) and a basic dye, ethyl violet (EV) is described. It is based on the counterion dye staining technique that employs two oppositely charged dyes to form an ion-pair complex in staining solution. The selective binding of free dye molecules to proteins in acidic solution produces bluish violet-colored bands. It is a rapid and end-point staining procedure, involving only fixing and staining steps that are completed in 1-1.5 h. The detection limit of this method is 8-15 ng of protein that is comparable to the sensitivity of the colloidal Coomassie Brilliant Blue G (CBBG) stain. Due to its sensitivity and speed, this stain may be more practical than any other dye-based stains for routine laboratory purposes.     

Organic phase conversion of bulk (wurtzite) ZnO to nanophase (wurtzite and zinc blende) ZnO

We describe the all-organic phase conversion of bulk commercial ZnO in the wurtzite modification to sub-30 nm ZnO that we find to be partially in the zinc blende [, a=4.568(3) Å] modification. The conversion involves refluxing ZnO in 2,4-pentanedione (acetylacetone) at 413 K to form the zinc 2,4-pentanedionate, which is decomposed by heating at 573 K in an appropriate high-temperature solvent such as dibenzylether to form nanophase ZnO. This nanophase, partially zinc blende ZnO can also be obtained in a single step by heating commercial zinc 2,4-pentanedionate in refluxing dibenzylether. Thermodiffractometry suggests that the conversion of zinc blende ZnO to wurtzite ZnO commences near 650 K.     

Kinetic study of copper(II) complexation with 9-ethyl-3-carbazolecarboxaldehyde-thiosemicarbazone and kinetic-spectrophotometric determination of copper(II)

The kinetics of complexation reaction of Cu(II) with 9-ethyl-3-carbazolecarboxaldehyde-thiosemicarbazone (ECCAT) has been examined spectrophotometrically. The ligand was synthesized for the first time. The complexation reaction was carried out in a DMF-water medium at 35°C. The complex has maximum absorbance at 393 nm. Kinetic and activation parameters of the complexation reaction were calculated by the Arrhenius and Eyring equations using the data obtained from investigating the effect of temperature on reaction rates under the specified conditions. We also proposed reaction rate equations. Based on the studied complexation reaction, a simple kinetic method for the spectrophotometric determination of copper(II) has been developed. The calibration graphs are linear in the concentration range 0.2–1.9 μg/mL. The species that caused interference were investigated. The text was submitted by the authors in English.