Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Mechanism and nanosize products of the sol-gel reaction using diphenylsilanediol and 3-methacryloxypropyltrimethoxysilane as precursors

We use a first-principles calculation and small-angle neutron scattering (SANS) to investigate the mechanism and the nanosize products of the sol-gel reaction with diphenylsilanediol (DPD) and 3-methacryloxypropyltrimethoxysilane (MEMO) precursors in synthesizing a hybrid waveguide material. It is predicted that switching between a DPD hydroxyl and a MEMO methoxy with a reaction rate of 6.8 x 10(-6) s(-1) at 300 K is the fastest process for the first reaction step, thus generating diphenylmethoxysilanol (DPM) and 3-methacryloxypropyldimethoxysilanol (MEDO) as products. However, we determine that this reaction pathway could be modified by the presence of the H2O released from a catalyst such as Ba(OH)2.H2O. Next, switching between the DPM hydroxyl and the MEDO methoxy is followed to generate diphenyldimethoxysilane (DPDM) and 3-methacryloxypropylmethoxysilanediol (MEMDO). However, condensation between a MEMDO hydroxyl and a DPDM methoxy is found to be most favorable for the third reaction step, which generates the DPDM-MEMDO dimer and CH3OH molecule as products. In a similar fashion, a DPDM methoxy of the DPDM-MEMDO dimer can condense with a MEMDO hydroxyl of the second DPDM-MEMDO dimer to increase the chain, but its reaction rate of 2.8 x 10(-11) s(-1) is predicted to be about 5 times smaller than that between a DPDM methoxy and a MEMDO hydroxyl. This implies that the reaction rate for the larger nanostructures becomes smaller. Additionally, our SANS measurements determine that the final products from our sol-gel reaction are on the nanometer scale, at sizes from 1.76 to 2.36 nm.     

Electron spin resonance studies of the radiolysis of bi-π-cyclopentadienylalkyls of molybdenum and tungsten

Exposure of (C₅H₅)₂MO(CH₃)₂ and (C₅H₅)₂W(CH₃)₂, prepared from the corresponding dichlorides, to ²⁰Co γ-rays at 77 K gave H₂C.CML₃ carbene species characterised by their ESR spectra, together with a central feature possibly due to the parent cations. Dilute solutions in CD₃OD gave features assigned to the parent anions which were converted on bleaching with visible light into methyl radicals, and H₂C.ML₃ radicals. From the magnitude of the ¹H and ¹⁸³W hyperfine coupling constants, it is deduced that the SOMO for H₂C.WL₃ radicals is strongly localised on carbon.Dilute solutions in aqueous sulphuric acid also gave species with A(2H) = 20 G, identified as the carbene derivatives, H₂C.Ml₃. These were formed on annealing, as signals assigned to HSO₄ · radicals were lost.     

Intermolecular and intramolecular Diels-Alder cycloadditions of 3-ylidenepiperazine-2,5-diones and 5-acyloxy-2(1h)-pyrazinones

The 3-ylidenepiperazine-2,5-diones 16 and 39 and 5-acyloxy-2(1H)-pyrazinones 17 can serve as starting materials for the Diels-Alder reactions of alkenes and alkynes to the piperazine ring, under acidic conditions or in the presence of acetyl chloride, to afford tricyclic piperazine-2,5-diones 19, 20, 23-25, 27, 44, and 45. Intramolecular cycloadditions occur if 3-ylidenepiperazine-2,5-diones 30 and 32 are used as the starting materials. This procedure is a convenient path to bridged bicyclo[2.2.2]diazaoctane ring systems such as 31 and 33, the former being found in biologically active secondary mold metabolites, such as VM55599 (1) or brevianamide A (5), which have been isolated from various fungi. The synthesis of the indole compound 31 provided evidence for the proposed biochemical pathway with a Diels-Alder reaction as key step. Quantum chemical calculations have revealed that piperazinones with a cationic azadiene moiety are the most reactive species in Diels-Alder cycloadditions.     

Preparation of nanoporous MgO-coated TiO2 nanoparticles and their application to the electrode of dye-sensitized solar cells

Sol-gel-derived Mg(OH)(2) gel was coated onto TiO(2) nanoparticles, and the subsequent thermal topotactic decomposition of the gel formed a highly nanoporous MgO crystalline coating. The specific surface area of the electrode that was prepared from the core-shell-structured TiO(2) nanoparticles significantly increased compared with that of the uncoated TiO(2) electrode. The increase in the specific surface area of the MgO-coated TiO(2) electrode was attributed to the highly nanoporous MgO coating layer that resulted from the topotactic reaction. Dye adsorption behavior and solar cell performance were significantly enhanced by employing the MgO-coated TiO(2) electrode. Optimized coating of a MgO layer on TiO(2) nanoparticles enhanced the energy conversion efficiency as much as 45% compared to that of the uncoated TiO(2) electrode. This indicates that controlling the extrinsic parameters such as the specific surface area is very important to improve the energy conversion efficiency of TiO(2)-based solar cells.     

Implicit solvent simulations of DPC micelle formation

The formation of micelles by dodecylphosphocholine (DPC) is modeled by treating the surfactants in atomic detail and the solvent implicitly, in the spirit of the EEF1 solvation model for proteins. The solvation parameters of the DPC atoms are carried over from those of similar atoms in proteins. A slight adjustment of the parameters for the headgroup was found necessary for obtaining an aggregation number consistent with experiment. Molecular dynamics simulations of 960 DPC molecules at different concentrations are used to obtain the aggregation number, the micelle size distribution, and the CMC. At 20 mM concentration we obtain an aggregation number of 53-56 and a CMC of 1.25 mM, values close to the experimental ones. At 100 mM the aggregation number increases to 90. Simulations of individual micelles of varying size show that the effective energy per surfactant molecule is initially a decreasing function of aggregation number but stabilizes at about 60 molecules. The van der Waals term and the desolvation of nonpolar groups contribute to micellization, whereas the desolvation of polar groups opposes it. From the difference between the effective energy and the free energy (calculated from the CMC), the translational and rotational entropy contributions to the free energy are estimated at about 7 kcal/mol per monomer. The micelles obtained here are more irregular than those obtained in explicit water simulations. This modeling approach allows the study of larger surfactant aggregates for longer times and the extraction of thermodynamic in addition to structural information.     

Measurement of nitric oxide by 4,5-diaminofluorescein without interferences

The fluorescent reagent 4,5-diaminofluorescein (DAF-2) has been widely used for specific and quantitative measurements of nitric oxide (NO) in biological tissues. Recently it was reported that dehydroascorbic acid (DHA) and ascorbic acid (AA) interfere with the measurement of NO using DAF-2. A new method of assaying NO using DAF-2 eliminates these interferences; when frozen on dry ice, the NO in the original solution still diffuses and can react with an adjacent frozen block of DAF-2, but the confounding compounds such as DHA do not. Thus, placing the microliter-volume frozen blocks of solutions containing NO and the solutions of DAF-2 adjacent to each other for 30 min results in the concentration dependent formation of fluorescent product (DAF-2T) from the reaction of NO with DAF-2. The product has been characterized and the method validated using both fluorescence spectroscopy and capillary electrophoresis with laser induced fluorescence detection. With this approach, the presence of DHA and AA does not interfere with NO measurements, and product formation is inhibited in the presence of NO scavengers added to either of the solutions before freezing. The contactless DAF-2 method successfully assays NO in nitric oxide synthase-positive vertebrate and invertebrate tissues. This method allows nondestructive NO detection in biological samples that can subsequently be used for morphological and/or biochemical studies.     

Synthesis of an optically active intermediate for A-ring of 19-nor- 1α,25-dihydroxyvitamin D3

An optically active intermediate 5 for A-ring of 19-nor-1a,25-dihydroxyvitamin D3 2 has been synthesized in five steps, starting from readily available, inexpensive D( )-xylose 6 with good yield.     

Furostanol saponins with inhibitory action against COX-2 production from Tupistra chinensis rhizomes

Two furostanol saponins were obtained from the n-butanol fraction of methanol extract from Tupistra chinensis rhizomes,a folk medicine of Shennongjia Forest District of Hubei Province.Their structures were determined as (25S)-26-O-(β-D-glucopyranosyl)- furost-1β,3β,22α,26-tetrol-3-O-β-D-glucopyranosyl-(1→4)-β-D-glucopyranosyl-(1→2)-β-D-glucopyranoside (1) and (25R)- 26-O-(β-D-glucopyranosyl)-furost-1β,3β22α,26-tetrol 3-O-β-D-glucopyranosyl-(1→4)-β-D-glucopyranosyl-(1→2)-β-D-glu- copyranoside (2),on basis of chemical and spectroscopic evidences.1 and 2 displayed marked inhibitory action towards COX-2 production in macrophages of the rat abdomen induced by LPS at 20μg/mL.     

Solid-phase synthesis of 4-biaryl-piperidine-4-carboxamides

A novel solid-phase synthesis of 4-biaryl-piperidine-4-carboxamides has been developed using FDMP resin with a carboxamide as the anchor point. With this approach, three points of diversity were incorporated into a GPCR-directed scaffold. Final products were obtained in good purity and yield.