Switchable Q-switched and laser operating mode-locked erbium-doped fiber in the L-band region

We demonstrate a switchable Q-switched and mode-locked erbium-doped fiber laser （EDFL） operating in the L-band region using the nonlinear polarization rotation effect. The switching operation is achieved by controlling intensity-dependent loss using a polarization controller. In Q-switching mode, the EDFL produces a pulse train with a repetition rate of 21.1 kHz, pulse width of 7.7 #s, and pulse energy of 13.6 nJ. The EDFL also generates a multi-wavelength comb with a very narrow and constant wavelength spacing of 0.045 nm and optical signal-to-noise ratio of at least l0 dB. During mode locking, the EDFL produces stretched pulses with 3-dB bandwidth of 26.2 nm, pulse width of 350 fs, repetition rate of 2.38 MHz, and pulse energy of 48.56 pJ.     

Montmorillonite Clay Catalysis I: An Efficient and Convenient Procedure for Preparation of 5(6)/5′(6′)-Unsaturated 3β-Disteryl Ethers

In the presence of montmorillonite K 10, 5(6)-unsaturated sterols (1) were heated at refluxing temperature in dichloromethane to provide 5(6)/5′(6′)-unsaturated 3β,3′β-disteryl ethers (4) in 69–73% yield. The mechanism of the reaction was discussed.     

Reaction mechanism of NH3-SCR denitrification over rare-earth concentrate

Research on Chemical Intermediates - A rare-earth concentrate obtained from Bayan Obo tailings was used as catalyst for low-temperature selective catalytic reduction (SCR) of NOx. X-ray powder...     

Photovoltaic devices using semiconducting polymers containing head‐to‐tail‐structured bithiophene,pyrene, and benzothiadiazole derivatives

An alternating copolymer composed of heal‐to‐tail‐structured 3,4′‐dihexyl‐2,2′‐bithiophene (DHBT) and pyrene units [poly(DHBT‐alt‐PYR)] was synthesized using a Stille coupling reaction for use in photovoltaic devices as a p‐type donor. For the reduction of the bandgap energy of poly(DHBT‐alt‐PYR), 4,7‐bis(3′‐hexyl‐2,2′‐bithiophen‐5‐yl)benzo[c][1,2,5]thiadiazole (BHBTBT) units were introduced into the polymer. Poly(DHBT‐co‐PYR‐co‐BHBTBT)s were synthesized using the same polymerization reaction. The synthesized polymers were soluble in common organic solvents and formed smooth thin films after spin casting. The optical bandgap energies of the polymers were obtained from the onset absorption wavelengths. The measured optical bandgap energy of poly(DHBT‐alt‐PYR) was 2.47 eV. As the BHBTBT content in the ter‐polymers increased, the optical bandgap energies of the resulting polymers decreased. The bandgap energies of poly(50DHBT‐co‐40PYR‐co‐10BHBTBT) and poly(50DHBT‐co‐20PYR‐co‐30BHBTBT) were 1.84 and 1.73 eV, respectively. Photovoltaic devices were fabricated with a typical sandwich structure of ITO/PEDOT:PSS/active layer/LiF/Al using the polymers as electron donors and [6,6]‐phenyl C₇₁‐butyric acid methyl ester as the electron acceptor. The device using poly(50DHBT‐co‐20PYR‐co‐30BHBTBT) showed the best performance among the fabricated devices, with an open‐circuit voltage, short‐circuit current, fill factor, and maximum power conversion efficiency of 0.68 V, 5.54 mA/cm², 0.35, and 1.31%, respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Solution‐processable and thermally cross‐linkable fluorene‐cored triple‐triphenylamines with terminal vinyl groups to enhance electroluminescence of MEH‐PPV: Synthesis,curing, and optoelectronic properties

This study reports the synthesis, curing, and optoelectronic properties of a solution‐processable, thermally cross‐linkable electron‐ and hole‐blocking material containing fluorene‐core and three periphery N‐phenyl‐N‐(4‐vinylphenyl)benzeneamine ( FTV ). The FTV exhibited good thermal stability with T_d above 478 °C in nitrogen atmosphere. The FTV is readily cross‐linked via terminal vinyl groups by heating at 160 °C for 30 min to obtain homogeneous film with excellent solvent resistance. Multilayer PLED device [ITO/PEDOT:PSS/cured‐ FTV /MEH‐PPV/Ca (50 nm)/Al (100 nm)] was successfully fabricated using solution processed. Inserting cured‐ FTV is between PEDOT:PSS and MEH‐PPV results in simultaneous reduction in hole injection from PEDOT:PSS to MEH‐PPV and blocking in electron transport from MEH‐PPV to anode. The maximum luminance and maximum current efficiency were enhanced from 1810 and 0.27 to 4640 cd/m² and 1.08 cd/A, respectively, after inserting cured‐ FTV layer. Current results demonstrate that the thermally cross‐linkable FTV enhances not only device efficiency but also film homogeneity after thermal curing. FTV is a promising electron‐ and hole‐blocking material applicable for the fabrication of multilayer PLEDs based on PPV derivatives. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012     

Facile Synthesis of Benzotriazines and Indoles by Ring-Scissions of α-Benzotriazol-1-yl Hydrazones

Abstract: α-(Benzotriazol-1-yl)hydrazones 2a-d and 13a-c were prepared by refluxing the corresponding α-(benzotriazol-1-yl)ketones with p-tosyl hydrazide or benzenesulfonyl hydrazide. Treatment of 2a-b with n-butyllithium in the presence of TMEDA gave benzotriazines 6a-b, while lithiation of 13a-c resulted in indole derivatives 16a-c, depending on the structure of the hydrazones.     

Diffeomorphisms with C 1-stably average shadowing

Let M be a closed smooth manifold M, and let f : M → M be a diffeomorphism. In this paper, we consider a nontrivial transitive set Λ of f . We show that if f has the C1-stably average shadowing property on Λ, then Λ admits a dominated splitting.